PCE Instruments: Test Instruments

Order no.: PCE-VT 2800

The PCE-VT 2800 Accelerometer measures acceleration, oscillation speed and shift of vibrating parts, machines and equipment. The device features an integrated data logger to record vibration measurements over time. Measurement data is stored on an SD card memory and can be transferred directly to a PC via USB or RS-232 interface.


- Handheld instrument with vibration data logging function
- Frequency range: 10 Hz ... 1 KHz
- True-RMS (TRMS), max-hold, data-hold and peak-value
  functionality
- Adjustable sampling rate

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: ACCTRI
- digital interface - relay interface - easy installation through module slot in temperature gauge PCE-IR10
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-SD 150SST C
Verifiable waterproof accurate scale in stainless steel with separate indicator (no corrosion). The multifunctional scale is manufactured to IP67, dust-tight and thus can also be temporarily submerged completely under water (up to 1 m depth). - verifiable -

- Test / Weighing capacity: 150 kg
- Readability: 50g
- Calibration value: 50 g
- Weighing surface: 600 x 500 mm
- Verifiable M III
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: RS232-USB
[more]
Manufacturer: USB ONLINE INT'L ELECTRONICS LIMITED
Test Instruments manufacturer
Order no.: RS232-USB
[more]
Manufacturer: USB ONLINE INT'L ELECTRONICS LIMITED
Test Instruments manufacturer
Order no.: PCE-PST 1

PCE-PST 1 adhesion tester is designed to check the adhesive force of edges and edge bands on support materials. With the adhesion tester, checks can be made with respect to the quality of workmanship. Feed speed, travel distance, tension, and traction angle are fixed. Ball transfer units on the guide surface of the Test Stand reduce the coefficient of friction. Likewise the self-locking jaws and smooth guide rollers always guarantee reproducible and comparable results.


- Measuring range: 500 N / 50 kg / 110 lbs
- Measurable edge thickness: 0.4 mm ... 3.5 mm
- Measurable thicknesses: 10 mm ... 64 mm
- Velocity: 0.3 m / min 

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PST 1

PCE-PST 1 adhesion tester is designed to check the adhesive force of edges and edge bands on support materials. With the adhesion tester, checks can be made with respect to the quality of workmanship. Feed speed, travel distance, tension, and traction angle are fixed. Ball transfer units on the guide surface of the Test Stand reduce the coefficient of friction. Likewise the self-locking jaws and smooth guide rollers always guarantee reproducible and comparable results.


- Measuring range: 500 N / 50 kg / 110 lbs
- Measurable edge thickness: 0.4 mm ... 3.5 mm
- Measurable thicknesses: 10 mm ... 64 mm
- Velocity: 0.3 m/min 

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CRC 10
The Adhesion Tester PCE-CRC 10 is designed to determine the quality of the adhesion of coatings. The Adhesion Tester is suitable for thin, thick or tough coatings on all surfaces. Since the adherence of paintings and other coatings is a crucial product and quality characteristic for their protective effect, adhesion testers are used in a wide range of industries.

 

- Evaluation of adhesion
- For thin, thick or tough coatings
- Large, non-slip grip
- Various blades selectable

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-TAT 10

The simple design and an absolutely straightforward operation make it possible for the practitioner to use the adhesion tester as an instrument for daily adhesion tests. Using adhesive with rapid curing, the tests can be performed by the user in the shortest possible time.


- Breakout force: 200 kg
- Diameter of base dolly, mm: 15.1 (№ 1) and 19.5 (№ 2)
- Specific breakout force, MPa: Dolly №1 up to 10 MPa (100) Dolly
  №2 up to 6 MPa (60)

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CRC-KB
1 x roll of adhesive tape PCE-CRC-KB (12.7 mm x 32.9 m)
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: ACCTMG
Mounting bracket adjustable in 2 axes for the measuring head of the temperature gauge PCE-IR10; enables the exact alignment.
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-EM 890

The Air and Temperature Meter PCE-EM 890 is an instrument for measuring environmental conditions. Thus, this air and temperature meter is ideal for technicians, sailors, farmers and many more people who are dependent on the weather or whose activities are significantly influenced by the weather.


Measurement functions:
- Humidity / temperature
- UV
- Air pressure
- Volume flow
- Dew point
- Wet bulb temperature
- Windchill
- Heat stress index
- Height above sea level
- External temperature over Pt1000
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VA 11

The Air and Temperature Meter PCE-VA 11 is an extensively used measuring instrument. This temperature meter offers the opportunity to determine air speeds, air temperature and infrared temperature. The illuminated LCD allows comfortable readings and facilitates use in dimly lit areas.


- Air speed range: 0.4 ... 30 m/s / 0.9 ... 67 mph
- Air flow range: 0 ... 9999 CFM / CMM
- Air temperature range: -10 ... 60°C / 14 ... 140°F
- IR temperature range: -50 ... 500°C / -58 ... 932°F

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VA 11-ICA

The Air and Temperature Meter PCE-VA 11 is a useful and versatile device for measuring air speeds, air temperature and infrared temperature. Thanks to the fast response time of the device, real-time measurement is possible without problems. The large display provides an accurate overview of the measured values.


- Air speed range: 0.4 ... 30 m/s / 0.9 ... 67 mph
- Air flow range: 0 ... 9999 CFM / CMM
- Air temperature range: -10 ... 60°C / 14 ... 140°F
- IR temperature range: -50 ... 500°C / -58 ... 932°F
- USB interface
- Incl. ISO Calibration Certificate 

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-007-ICA

This air flow meter is very economical. With this air flow meter you can measure wind speed and air temperature.

- Speed measurement up to 45 m/s or 100 mph
- Wind speed: 0.01 m/s, accuracy ±3% ±0.1
- Air temperature: 0.2°C / 32.4°F, accuracy ±1°C / 33.8°F
- Air flow: 0.001 to 100, accuracy calculated from the wind speed and surface
- Incl. ISO calibration certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-007

Air flow meter with port, memory, software for wind speed, temperature and air flow. These test instruments are calibrated by the manufacturer. An ISO calibration certificate is available as an option.

- Speed measurement up to 45 m/s or 100 mph
- Wind speed: 0.01 m/s, accuracy ±3% ±0.1
- Air temperature: 0.2°C / 32.4°F, accuracy ±1°C / 33.8°F
- Air flow: 0.001 to 100, accuracy calculated from the wind speed and surface

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-423

The PCE-423 Airflow Meter with thermal sensor is highlighted by its good relation between price and quality. The PCE-423 Airflow Meter has a high resolution to be used for different applications. This PCE-423 Airflow Meter. It belongs to the the basic equipment for professionals working with ventilation systems.


- Kind of sensor: Hot wire
- External
- Memory: No
- Interface: USB
- Measurement range: 0.1 ... 25.0 m/s, 0.2 ...55.8 mph
- Resolution: 0.01 m/s, 0.1 mph

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-423-ICA
The PCE-423 is a high resolution air flow meter to measure air velocity and temperature in varied situations. The air flow meter belongs in the basic toolkit for professionals working with ventilation systems, as well as being useful in institutional research and development.


- Measurement range:m/s: 0.1 ... 25.0 m/s, 0.2 ... 55.8 mph
- Measures air velocity and temperature
- Suitable for low velocity air flow
- multiple measurement units available
- Large LCD display
- Data-Hold function
- Incl. ISO calibration certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-A420

Without a doubt, the main advantage of this handheld cup vane Air Flow Meter is that it doesn't need to be held exactly in the direction of the wind. Air Flow Meter with impellers typically have to be held exactly in the direction of the air flow to take accurate measurements. Digital cup vane Air Flow Meter, wind direction will not influence the measurement.


- 0.9 to 35.0 m/s
- 2.5 to 126.0 km/h
- 1.4 to 68.0 knots
- 1.6 to 78.2 miles/h 

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-AM 85
The compact air flow meter PCE-AM 85 is an ideal companion for every outdoor activist. This lightweight airflow meter with altimeter and barometer function should not be missing on any tour. The air flow meter PCE-AM 85 informs you about the reached altitude of -2000 ... 9000 m / -6,561 ... 29,527 ft.

- Altimeter up to 9,000 m / 29,527 ft
- Air pressure (absolute)
- Wind speed
Manufacturer: PCE Instruments
Test Instruments manufacturer

ISO-Certified Test Instruments Manufacturer

Custom-Made Test Instruments

PCE Instruments offers a wide range of stock products. However, despite an extensive selection of stock product offerings, sometimes a custom product is required to satisfy the specific requirements of a new, groundbreaking or special application.

Are you looking for custom test instruments?
Look no further than PCE Instruments. The DIN EN ISO 9001-certified PCE Product and Development Company GmbH produces customized test instruments tailored to meet the unique needs of a diverse customer base. By capitalizing on the expert knowledge and extensive experience of PCE’s industry-leading Tailored Test Instrumentsengineers and technicians to create custom-built test instruments, customers obtain measuring devices designed specifically for the task at hand.

Throughout the design, development and production process, PCE's engineers and technicians work hand-in-hand with each customer to ensure the final test instrument exceeds expectations. Specifications are clearly defined from the start of the project. Sensors, microprocessors and other electronic components are sourced from high-quality suppliers. Software is written to best support the customer's systems, processes and procedures. Qualified calibration laboratories are tasked with verifying the measurement accuracy of the custom test instrument, and rigorous testing is conducted to make certain that the device will function properly under the anticipated operating conditions.

If you are interested in pursuing the creation of a custom test instrument designed to accommodate an unusual or highly specialized measuring task, please contact the friendly and knowledgable staff at info@industrial-needs.com or +44 (0) 2380 987 035 for PCE Instruments UK, or at info@pce-americas.com or +1 (561) 320-9162 for PCE Americas Inc.