PCE Instruments: Test Instruments

Order no.: CA-D30CN

The CA-D30CN D Series Clamp Meter for oscilloscopes has a high-quality iron core with evenly distributed windings. This allows accurate AC current measurement, even at currents up to 3000 A. Due to the rectangular shape, the Clamp Meter is particularly suitable for busbars and cables with a large cross section. The Clamp Meter adapter comes manufacturer calibrated with ISO calibration as an option.
- Measuring range: 1 A to 3000 A
- Transformer Ratio: 3 A / 1 mA
- Connection: cable with plug

Manufacturer: Chauvin Arnoux GmbH
Order no.: CA-D30N

The CA-D30N D Series Clamp Meter for oscilloscopes has a high-quality iron core with evenly distributed windings. This allows accurate AC current measurement, even at currents up to 3000 A. Due to the rectangular shape, the Clamp Meter is particularly suitable for busbars and cables with a large cross section.
- Measuring range: 1 A to 3000 A
- Transformer Ratio: 3 A / 1 mA
- Connection: 4 mm / 0.2 in socket

Manufacturer: Chauvin Arnoux GmbH
Order no.: CA-D31N

The CA-D31N D Series Clamp Meter for oscilloscopes has a high-quality iron core with evenly distributed windings. This allows accurate AC current measurement, even at currents up to 3000 A. Due to the rectangular shape, the Clamp Meter is particularly suitable for busbars and cables with a large cross section. The Clamp Meter adapter comes manufacturer calibrated with ISO calibration as an option.
- Measuring range: 1 A to 500 A, 1 A to 1000 A, 1 A to 1500 A
- Transformer Ratio: 0.5 A / 1 mA, 1 A / 1 mA, 1.5 A / 1 mA
- Connection: 4 mm / 0.2 in socket

Manufacturer: Chauvin Arnoux GmbH
Order no.: CA-D32N

The CA-D32N D Series Clamp Meter for oscilloscopes has a high-quality iron core with evenly distributed windings. This allows accurate AC current measurement, even at currents up to 3000 A. Due to the rectangular shape, the Clamp Meter is particularly suitable for busbars and cables with a large cross section. The Clamp Meter adapter comes manufacturer calibrated with ISO calibration as an option.
- Measuring range: 1 A to 1000 A, 1 A to 2000 A, 1 A to 3000 A
- Transformer Ratio: 1 A / 1 mA, 2 A / 1 mA, 3 A / 1 mA
- Connection: 4 mm / 0.2 in socket

Manufacturer: Chauvin Arnoux GmbH
Order no.: CA-D33N

The CA-D33N D Series Clamp Meter for oscilloscopes has a high-quality iron core with evenly distributed windings. This allows for accurate AC current measurement even at currents up to 3000 A. Due to the rectangular shape, the D Series is particularly suitable for busbars and cables with a large cross section. The Clamp Meter adapter comes manufacturer calibrated with ISO certification as an option.
- Measuring range: 1 A to 3000 A
- Transformer Ratio: 1 A / 1 mA
- Connection: 4 mm / 1.6 in socket

Manufacturer: Chauvin Arnoux GmbH
Order no.: CA-D34N

The CA-D34N D Series Clamp Meter for oscilloscopes has a high-quality iron core with evenly distributed windings. This allows accurate AC current measurement, even at currents up to 3000 A. Due to the rectangular shape, the Clamp Meter is particularly suitable for busbars and cables with a large cross section. The Clamp Meter adapter comes manufacturer calibrated with ISO calibration as an option.
- Measuring range: 1 A to 500 A, 1 A to 1000 A, 1 A to 1500 A
- Transformer Ratio: 0.5 A / 1 mA, 1 A / 1 mA, 1.5 A / 1 mA
- Connection: 4 mm / 0.2 in socket

Manufacturer: Chauvin Arnoux GmbH
Order no.: CA-D35N

The CA-D35N D Series Clamp Meter for oscilloscopes has a high-quality iron core with evenly distributed windings. This allows accurate AC current measurement, even at currents up to 3000 A. Due to the rectangular shape, the Clamp Meter is particularly suitable for busbars and cables with a large cross section. The Clamp Meter adapter comes manufacturer calibrated with ISO calibration as an option.
- Measuring range: 1 A to 1000 A, 1 A to 2000 A, 1 A to 3000 A
- Transformer Ratio: 1 A / 1 mA, 2 A / 1 mA, 3 A / 1 mA
- Connection: 4 mm / 0.2 in socket

Manufacturer: Chauvin Arnoux GmbH
Order no.: CA-D36N

The CA-D36N D Series Clamp Meter for oscilloscopes has a high-quality iron core with evenly distributed windings. This allows accurate AC current measurement, even at currents up to 3000 A. Due to the rectangular shape, the Clamp Meter is particularly suitable for busbars and cables with a large cross section. The Clamp Meter adapter comes manufacturer calibrated with ISO calibration as an option.
- Measuring range: 1 A to 3000 A
- Transformer Ratio: 1 A / 1 mA
- Connection: 4 mm / 0.2 in socket

Manufacturer: Chauvin Arnoux GmbH
Order no.: CA-D37N

The CA-D37N D Series Clamp Meter for oscilloscopes has a high-quality iron core with evenly distributed windings. This allows accurate AC current measurement, even at currents up to 3000 A. Due to the rectangular shape, the Clamp Meter is particularly suitable for busbars and cables with a large cross section. The Clamp Meter adapter comes manufacturer calibrated with ISO calibration as an option.
- Measuring range: 1 A to 30 A, 1 A to 300 A, 1 A to 3000 A
- Transformer Ratio: 1 A / 1 V, 100 A / 1 V, 1000 A / 1 V
- Connection: 4 mm / 0.2 in socket

Manufacturer: Chauvin Arnoux GmbH
Order no.: CA-D38N

The CA-D38N D Series Clamp Meter for oscilloscopes has a high-quality iron core with evenly distributed windings. This allows accurate AC current measurement, even at currents up to 3000 A. Due to the rectangular shape, the Clamp Meter is particularly suitable for busbars and cables with a large cross section. The Clamp Meter adapter comes manufacturer calibrated with ISO calibration as an option.
- Measuring range: 1 A to 30 A, 1 A to 300 A, 1 A to 3000 A
- Transformer Ratio: 1 A / 1 V, 100 A / 1 V, 1000 A / 1 V
- Connection: BNC

Manufacturer: Chauvin Arnoux GmbH
Order no.: CA-E1N

The CA-E Series Clamp Meter for multimeters and oscilloscopes is a small current transformer with a clamp diameter of 8 mm (0.3 in) with a measuring range of 5 mA to a maximum of 150 A and a frequency range of up to 100 kHz.
- Measuring range: 0.05 A ... 150 A AC / DC
- Conversion ratio: 1 A / 1 mV
- 4 mm / 0.2 in banana plug

Manufacturer: Chauvin Arnoux GmbH
Order no.: CA-E3N

The CA-E Series Clamp Meter for multimeters and oscilloscopes is a small current transformer with a clamp diameter of 8 mm (0.3 in) with a measuring range of 5 mA to a maximum of 150 A and a frequency range of up to 100 kHz.
- Measuring range: 0.05 A ... 100 A AC / DC
- Conversion ratio: 1 A / 10 mV
- BNC connector

Manufacturer: Chauvin Arnoux GmbH
Order no.: CA-E6N

The CA-E Series Clamp Meter for multimeters and oscilloscopes is a small current transformer with a clamp diameter of 8 mm (0.3 in) with a measuring range of 5 mA to a maximum of 150 A and a frequency range of up to 100 kHz.
- Measuring range: 5 mA ... 80 A AC / DC
- Conversion ratio: 1 A / 10 mV
- 4 mm / 0.2 in plug

Manufacturer: Chauvin Arnoux GmbH
Order no.: CA-K1

Current transformers for process streams up to max. 4.5 A, 3.9 mm diameter pliers, for multimeter. The Clamp Meter for multimeter from the K Series is used to direct and measure alternating currents precisely. The field of application of this Clamp Meter is where very small currents need to be measured. Thus, the Clamp Meter is used to process streams of control technology in the range of 4 ... 20 mA. The test instrument (as all instruments) comes manufacturer calibrated (ISO certification as an option).


- Range: 1 m A 4.5 A peak
- Measurement: AC A, DC A

 

Manufacturer: Chauvin Arnoux GmbH
Order no.: CA-K2

Current transformers for process streams up to max. 4.5 A, 3.9 mm diameter pliers, for multimeter. The Clamp Meter for multimeter from the K Series is used to direct and measure alternating currents precisely. The field of application of this Clamp Meter is where very small currents need to be measured. Thus, the Clamp Meter is used to process streams of control technology in the range of 4 ... 20 mA. The test instrument (as all instruments) comes manufacturer calibrated (ISO certification as an option).


- Range: 0.1 mA ... 450 mA peak
- Measurement: AC A, DC A

 

Manufacturer: Chauvin Arnoux GmbH
Order no.: CA-MA200-17

The CA-MA200-17 Mini Clamp Meter can measure AC currents from 0.5 A to 300 A with a 1 MHz bandwidth, and features a BNC connector for oscilloscopes. Whether the current is to be measured in control cabinets, junction boxes, or on tracks, the miniature CT MA 200, with its flexible current loop, is a way to measure the current with a bandwidth of 1 MHz. Thanks to the BNC output of the miniature CT MA 200 it may be directly connected to an oscilloscope. The test meter comes manufacturer calibrated with ISO certification as an option.
- Current Ranges: 30 A / 300 A
- Length of the loop: 17 cm / 6.7 in
- Enclosing diameter: 4.5 cm / 1.8 in
- CT ratio: 100 mV / A, 10 mV / A

Manufacturer: Chauvin Arnoux GmbH
Order no.: CA-MA200-25

The CA-MA200-25 Mini Clamp Meter can measure AC currents from 0.5 A to 300 A with a 1 MHz bandwidth, and features a BNC connector for oscilloscopes. Whether the current is to be measured in control cabinets, junction boxes, or on tracks, the miniature CT MA 200, with its flexible current loop, is a way to measure the current with a bandwidth of 1 MHz. Thanks to the BNC output of the miniature CT MA 200 it may be directly connected to an oscilloscope. The test meter comes manufacturer calibrated with ISO certification as an option.
- Current Ranges: 30 A / 300 A
- Length of the loop: 25 cm / 9.8 in
- Enclosing diameter: 7 cm / 2.8 in
- CT ratio: 100 mV / A, 10 mV / A

Manufacturer: Chauvin Arnoux GmbH
Order no.: CA-MA200-35

The CA-MA200-35 Mini Clamp Meter can measure AC currents from 0.5 A to 3000 A with a 1 MHz bandwidth, and features a BNC connector for oscilloscopes. Whether the current is to be measured in control cabinets, junction boxes, or on tracks, the miniature CT MA 200, with its flexible current loop, is a way to measure the current with a bandwidth of 1 MHz. Thanks to the BNC output of the miniature CT MA 200 it may be directly connected to an oscilloscope. The test meter comes manufacturer calibrated with ISO certification as an option.
- Current Ranges: 300 A / 3000 A
- Length of the loop: 35 cm / 13.8 in
- Enclosing diameter: 10 cm / 3.9 in
- CT ratio: 10 mV / A, 1 mV / A

Manufacturer: Chauvin Arnoux GmbH
Order no.: CA-Mini01

Current transformers for multimeter to 150 A AC, Æ max. 10 mm, different output signals - The opening width of the clamp to this converter is 39 mm. The measured current is a conversion ratio of 1000; 1 or 100: 1 output as direct or alternating current or voltage of the clamp convertor. The clamp convertor is connected via the connector to any multimeter or to a data logger.


- Measuring range: 2 ... 150 A
- Accuracy: 2.5 %
- Bandwidth: 48 ... 500 Hz

 

Manufacturer: Chauvin Arnoux GmbH
Order no.: CA-Mini02

Current transformers for multimeter to 150 A AC, Æ max. 10 mm, different output signals - The clamp convertor can be used both for currents upto 150 A and for small currents of a few mA. The clamp meter convertor measures the AC reliably and accurately. Cables with a diameter up to 10 mm can be added to the clamp convertor. The opening width of the clamp to this converter is 39 mm.


- Measuring range: 0.05 ... 100 A
- Accuracy: 1%
- Bandwidth: 48 ... 10 Hz

 

Manufacturer: Chauvin Arnoux GmbH

ISO-Certified Test Instruments Manufacturer

Custom-Made Test Instruments

PCE Instruments offers a wide range of stock products. However, despite an extensive selection of stock product offerings, sometimes a custom product is required to satisfy the specific requirements of a new, groundbreaking or special application.

Are you looking for custom test instruments?
Look no further than PCE Instruments. The DIN EN ISO 9001-certified PCE Product and Development Company GmbH produces customized test instruments tailored to meet the unique needs of a diverse customer base. By capitalizing on the expert knowledge and extensive experience of PCE’s industry-leading Tailored Test Instrumentsengineers and technicians to create custom-built test instruments, customers obtain measuring devices designed specifically for the task at hand.

Throughout the design, development and production process, PCE's engineers and technicians work hand-in-hand with each customer to ensure the final test instrument exceeds expectations. Specifications are clearly defined from the start of the project. Sensors, microprocessors and other electronic components are sourced from high-quality suppliers. Software is written to best support the customer's systems, processes and procedures. Qualified calibration laboratories are tasked with verifying the measurement accuracy of the custom test instrument, and rigorous testing is conducted to make certain that the device will function properly under the anticipated operating conditions.

If you are interested in pursuing the creation of a custom test instrument designed to accommodate an unusual or highly specialized measuring task, please contact the friendly and knowledgable staff at info@industrial-needs.com or +44 (0) 2380 987 035 for PCE Instruments UK, or at info@pce-americas.com or +1 (561) 320-9162 for PCE Americas Inc.