With this Automotive Tester, layer thicknesses on metallic surfaces can be reliably determined. The Automotive Tester has a measuring range of 1500 µm. This means that the Automotive Tester is used, for example, in a paint shop, for incoming goods inspection or for an expert.
- Measuring range up to 1500 µm - Measurable substrates: Fe, NFe - Probe: internal - Micro USB and Bluetooth interface - Data storage for up to 600 measured values
With this automotive tester, layer thicknesses on metallic surfaces can be reliably determined. The automotive tester has a measuring range of 1500 µm. This means that the automotive tester is used, for example, in a paint shop, for incoming goods inspection or for an expert.
- Measuring range up to 1500 µm - Measurable substrates: Fe, NFe - Probe: internal - Micro USB and Bluetooth interface - Data storage for up to 600 measured values
- incl. ISO Calibration Certificate
The PCE-CT 26FN automotive tester can measure non-destructive coatings (paints, plastics ...) on steel / iron and non-ferrous metals. The PCE-CT 26FN automotive tester is ideally suited to immediately detect, for example, accident damage to the vehicle.
The PCE-CT 26FN automotive tester can measure non-destructive coatings (paints, plastics ...) on steel / iron and non-ferrous metals. The PCE-CT 26FN automotive tester is ideally suited to immediately detect, for example, accident damage to the vehicle.
The automotive tester has a measuring range of 0 ... 2000 µm. The material tester can be used to measure the coating thickness on ferrous (Fe) and non-ferrous (NFe) metals.
The automotive tester has a measuring range of 0 ... 2000 µm. The material tester can be used to measure the coating thickness on ferrous (Fe) and non-ferrous (NFe) metals.
- Measuring range: 0 ... 2000 µm
- Temperature Measuring range: 0 ... 50 °C
- Humidity Measuring range: 0 ... 100 % r. h.
- with SSPC measuring function
- Individually adjustable limit value alarms
- Data memory with up to 2500 measured values - incl. ISO Calibration Certificate
The automotive tester is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics ...) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the automotive tester, measuring points that are difficult to access can also be easily reached.
- Measuring range: Fe: 0 ... 5000 µm, NFe: 0 ... 3000 µm - Accuracy after foil calibration: ±(2% of reading + 1 µm) - For many materials such as: iron, steel, aluminum, copper, brass, stainless steel - Diameter: 17mm / 0.67"
The automotive tester is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics ...) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the automotive tester, measuring points that are difficult to access can also be easily reached.
- Measuring range: Fe: 0 ... 5000 µm, NFe: 0 ... 3000 µm - Accuracy after foil calibration: ±(2% of reading + 1 µm) - For many materials such as: iron, steel, aluminum, copper, brass, stainless steel - Diameter: 17mm / 0.67" - incl. ISO-Calibration Certificate
The automotive tester is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics ...) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the automotive tester, measuring points that are difficult to access can also be easily reached.
- Measuring range: Fe: 0 ... 500 µm, NFe: 0 ... 500 µm - Accuracy after foil calibration: ±(1% of reading + 1 µm) - For many materials such as: iron, steel, aluminum, copper, brass, stainless steel - Diameter: 17mm / 0.67"
The automotive tester is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics ...) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the automotive tester, measuring points that are difficult to access can also be easily reached.
- Measuring range: Fe: 0 ... 500 µm, NFe: 0 ... 500 µm - Accuracy after foil calibration: ±(1% of reading + 1 µm) - For many materials such as: iron, steel, aluminum, copper, brass, stainless steel - Diameter: 17mm / 0.67" - incl. ISO Calibration Certificate
The automotive tester is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics ...) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the automotive tester, measuring points that are difficult to access can also be easily reached.
- Measuring range: Fe: 0 ... 1500 µm, NFe: 0 ... 1500 µm - Accuracy after foil calibration: ±(2% of reading + 1 µm) - For many materials such as: iron, steel, aluminum, copper, brass, stainless steel - Diameter: 17mm / 0.67"
The automotive tester is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics ...) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the automotive tester, measuring points that are difficult to access can also be easily reached.
- Measuring range: Fe: 0 ... 1500 µm, NFe: 0 ... 1500 µm - Accuracy after foil calibration: ±(2% of reading + 1 µm) - For many materials such as: iron, steel, aluminum, copper, brass, stainless steel - Diameter: 17mm / 0.67" - incl. ISO Calibration Certificate
The automotive tester is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics ...) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the automotive tester, measuring points that are difficult to access can also be easily reached.
- Measuring range: Fe: 0 ... 2000 µm, NFe: 0 ... 2000 µm - Accuracy after foil calibration: ±(2% of reading + 1 µm) - For many materials such as: iron, steel, aluminum, copper, brass, stainless steel - Diameter: 17mm / 0.67"
The automotive tester is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics ...) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the automotive tester, measuring points that are difficult to access can also be easily reached.
- Measuring range: Fe: 0 ... 2000 µm, NFe: 0 ... 2000 µm - Accuracy after foil calibration: ±(2% of reading + 1 µm) - For many materials such as: iron, steel, aluminum, copper, brass, stainless steel - Diameter: 17mm / 0.67" - incl. ISO-Calibration Certificate
The automotive tester is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics ...) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the automotive tester, measuring points that are difficult to access can also be easily reached.
- Measuring range: Fe: 0 ... 2500 µm, NFe: 0 ... 2500 µm - Accuracy after foil calibration: ±(2% of reading + 1 µm) - For many materials such as: iron, steel, aluminum, copper, brass, stainless steel - Diameter: 17mm / 0.67"
The automotive tester is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics ...) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the automotive tester, measuring points that are difficult to access can also be easily reached.
- Measuring range: Fe: 0 ... 2500 µm, NFe: 0 ... 2500 µm - Accuracy after foil calibration: ±(2% of reading + 1 µm) - For many materials such as: iron, steel, aluminum, copper, brass, stainless steel - Diameter: 17mm / 0.67" - incl. ISO-Calibration Certificate
The automotive tester is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics ...) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the automotive tester, measuring points that are difficult to access can also be easily reached.
- Measuring range: Fe: 0 ... 3000 µm, NFe: 0 ... 3000 µm - Accuracy after foil calibration: ±(2% of reading + 1 µm) - For many materials such as: iron, steel, aluminum, copper, brass, stainless steel - Diameter: 17mm / 0.67"
The automotive tester is a measuring device for non-destructive measurement of coatings (varnishes, paints, plastics ...) on steel / iron and non-ferrous metals. Thanks to the externally connected sensor on the automotive tester, measuring points that are difficult to access can also be easily reached.
- Measuring range: Fe: 0 ... 3000 µm, NFe: 0 ... 3000 µm - Accuracy after foil calibration: ±(2% of reading + 1 µm) - For many materials such as: iron, steel, aluminum, copper, brass, stainless steel - Diameter: 17mm / 0.67" - incl. ISO-Calibration Certificate
PCE Instruments offers a wide range of stock products. However, despite an extensive selection of stock product offerings, sometimes a custom product is required to satisfy the specific requirements of a new, groundbreaking or special application.
Are you looking for custom test instruments?
Look no further than PCE Instruments. The DIN EN ISO 9001-certified PCE Product and Development Company GmbH produces customized test instruments tailored to meet the unique needs of a diverse customer base. By capitalizing on the expert knowledge and extensive experience of PCE’s industry-leading engineers and technicians to create custom-built test instruments, customers obtain measuring devices designed specifically for the task at hand.
Throughout the design, development and production process, PCE's engineers and technicians work hand-in-hand with each customer to ensure the final test instrument exceeds expectations. Specifications are clearly defined from the start of the project. Sensors, microprocessors and other electronic components are sourced from high-quality suppliers. Software is written to best support the customer's systems, processes and procedures. Qualified calibration laboratories are tasked with verifying the measurement accuracy of the custom test instrument, and rigorous testing is conducted to make certain that the device will function properly under the anticipated operating conditions.
If you are interested in pursuing the creation of a custom test instrument designed to accommodate an unusual or highly specialized measuring task, please contact the friendly and knowledgable staff at info@industrial-needs.com or +44 (0) 161-464902-5 for PCE Instruments UK, or at info@pce-americas.com or +1 (561) 320-9162 for PCE Americas Inc.
engineers and technicians to create custom-built test instruments, customers obtain measuring devices designed specifically for the task at hand.
