PCE Instruments: Test Instruments

Order no.: PCE-TDS 100H

PCE-TDS 100H is a portable handheld clamp-on ultrasonic flow test instrument or meter used for non-invasive, unobstructed and highly accurate measurements of the flow velocity of liquids in metal, plastic and rubber pipes and tubes with a diameter of 57 … 720 mm / approx. 2 ... 28".  Software sold separately - see accessories for details.


- Measuring range: -32 ... +32 m/s
- Resolution: 0.0001 m/s
- Accuracy: ±1 % of measured value
- Linearity: 0.5 %
- Repeatability: 0.2 %
- Incl. factory calibration certificate

 

Manufacturer: PCE Instruments
Order no.: PCE-TDS 100HS

PCE-TDS 100HS is a portable handheld clamp-on ultrasonic flow test instrument or meter used for non-invasive, unobstructed and highly accurate measurements of the flow velocity of liquids in metal, plastic and rubber pipes and tubes with a diameter of 20 … 108 mm / approx. 3/4" ... 4". Software sold separately - see accessories for details.


- Measuring range: -32 ... +32 m/s
- Resolution: 0.0001 m/s
- Accuracy: ±1 % of measured value
- Linearity: 0.5 %
- Repeatability: 0.2 %
- Incl. factory calibration certificate

 

Manufacturer: PCE Instruments
Order no.: PCE-USC 20
PCE-USC 20 is a portable or benchtop ultrasonic tester or ultrasonic thickness gauge with a 5.7" TFT color LCD screen. This ultrasound-based test instrument uses one or two contact transducers (four different probes included; 90 °, 70 °, 60 °, 45 °) to measure material or wall thickness, detect flaws or defects in welds, and monitor the effects of corrosion on pipes and tanks.

- Measurement range: 0.5 ... 9999 mm (steel; longitudinal wave)
- Operating frequency range: 0.5 ... 20 MHz
- Sound velocity: 1000 ... 15000 m/s (continuously adjustable)
- AVG and DAC evaluation methods, display and probes delay, damping and reinforcing functions, export and reporting functions
Manufacturer: PCE Instruments
Order no.: PCE-KD5

PCE-KD5 is a universal test instrument, display recorder or data logger for the capturing, monitoring and controlling of process parameters. The data logger is based on a Linux operating system and has three slots that can be equipped with several different inputs and outputs. Depending on your specific needs, it is possible to equip the PCE-KD5 data logger with up to 48 analog or binary inputs, 24 thermocouple inputs, 12 resistance temperature detector (RTD) inputs, 16 relays / solid state relays (SSRs) or 8 analog outputs.

- Up to 48 analog or binary inputs
- Up to 24 thermocouple inputs
- Up to 12 inputs for RTDs
- Up to 16 relays / SSRs
- Maximum sampling rate of 10 Hz
- 1.5 GB internal memory

Manufacturer: PCE Instruments
Order no.: PCE-TU 3

The PCE-TU 3 Vibration Test Instrument is designed to check the shafts in machines and facilities and for the optical alignment of the shafts. This reduces machine downtime and prevents premature bearing failure. By means of the PCE-TU 3 Vibration Meter the relative position between two coupled machines, such as an engine and a pump, can be alternated to the point that the axis line of the shafts align during common operation. These test instruments are calibrated by the manufacturer. An ISO calibration certificate is an option.

- Accurate shaft alignment
- Max. 10 m distance between sensors
- Resolution 0.001 mm
- Measurement via Soft Foot possible
- 2 GB internal data memory

Manufacturer: PCE Instruments
Order no.: PCE-VM 25

The PCE-VM 25 Vibration Meter is designed for engine monitoring to assure a smooth operation of machines. Due to its simple application, the Vibration Meter can be used for the measurement of a large range of parameters including acceleration, velocity and displacement. These test instruments are calibrated by the manufacturer. An ISO calibration certificate is available as an option.

-
The frequency range 10 Hz ... 10 kHz
- True RMS, Max Hold, peak value
- OLED display
- Measurement memory
- VMID measuring point function

Manufacturer: PCE Instruments
Order no.: PCE-VM 31-HAWB
The PCE-VM 31-HAWB Vibration Test Instrument or Analyzer is designed for measuring human vibration at the workplace. The Vibration Analyzer can calculate hand-arm vibration measurements according to ISO 5349 and whole-body vibration measurements according to ISO 2631. Each sensor consists of a triaxial Vibration Analyzer that captures acceleration, velocity, and displacement measurements.

- Measuring of human vibration at the workplace
- Velocity, acceleration, displacement
- 3 channel FFT
- TEDS support

Manufacturer: PCE Instruments
Order no.:
[more]
Test Instruments manufacturer
Order no.: ABBE-REF 1

ABBE-REF 1 is a high-precision Abbe refractometer for the accurate measurement of refractive indexes (nD), sucrose or sugar contents (% Brix) and mean dispersion values (nF-nC) of transparent and translucent liquids and substances. This bench-top Abbe refractometer can be used to determine refractive indexes in a temperature range from 0 ... +70 ºC (temperature control included).


- Measurement ranges: 1.300 ... 1.700 nD / 0.0 ... 95 % Brix
- Scale division: 0.0005 nD / 0.25 % Brix
- Resolution and accuracy: 0.0002 nD / 0.1 % Brix

 

Manufacturer: PCE Instruments
Order no.: DLB 160-3A

Absolute Moisture Meter DBS 160-3A to measure the moisture content / water content in small samples or heavy, high volume samples. The Absolute Moisture Meter is scale / balance and Moisture Analyzer in one. All test instruments come manufacturer calibrated. ISO certification can be ordered as an option. Fast working device that delivers accurate and reliable test results. 220 V AC input standard, GB or USA AC version upon request.


- Most accurate way to measure moisture / water content
- Ability to work with small sample size or large volume
- Test / Measuring range: 0 ... 100%, max. 160 g
- Readability 0.001 g / 0.01 %, reproducibility 0.05%
- Adjustable temperature between +35°C ... +160°C

 

Manufacturer: Kern & Sohn GmbH
Test Instruments manufacturer
Order no.: FL-1

The Absolute Moisture Meter FL-1 is made to determine the moisture content in hay, straw and cellulose insulating materials. The extra long probe of this kind of test instruments enables to measure the moisture content in the core of the material.


- Measuring range: 8 ... 30 %, -20 ... +120 °C (measuring point)
- Resolution: 0.5 °C / %
- Accuracy: ±1 °C / %
- Extra long probe
- Rated IP40

 

Manufacturer: Messtechnik Schaller GmbH
Test Instruments manufacturer
Order no.: FL-2

The Absolute Moisture Meter FL-2 is made to determine the moisture content in hay and straw materials. The extra long probe of this kind of test instruments enables to measure the moisture content in the core of the material. All test instruments come manufacturer calibrated. ISO certification can be ordered as an option.


- Test / Measuring range: 10 ... 60 %, -20 ... +120 °C
  (measuring point)
- Resolution: 0.1 %
- Accuracy: ±0.8 %
- Extra long probe
- Internal data storage of 10,000 values
- Rated IP40
- Supplied with software and interface module

 

Manufacturer: Messtechnik Schaller GmbH
Test Instruments manufacturer
Order no.: FMC

The Absolute Moisture Meter FMC can accurately measure absolute moisture in diverse building materials. To detect moisture, the test instruments have a connection for external sensors which can either be inserted into the building material or placed on it. All test instruments come manufacturer calibrated.


- Measuring range: 5-99% wood / 0-99% building materials
- Resolution: 0.1 % / Accuracy: ±0.3 %
- Sensor not included
- External probe
- For wood, paper and building materials

 

Manufacturer: Brookhuis Applied Technologies B.V.
Test Instruments manufacturer
Order no.: FMD 6

FMD 6 is a handheld absolute moisture meter for accurate measurement of the moisture content of paper, wood and building materials. The moisture meter features preset characteristic curves for material-specific moisture measurement. To detect moisture, the moisture meter requires external sensors (sold separately - see accessories) that can either be inserted into a material or placed on a material's surface, allowing for either destructive or non-destructive measurement.


- Measuring range: 5-99% for wood / 0-99% for building materials
- Resolution: 0.1%
- Accuracy: ±0.2%
- Memory stores up to 1,000 measurement values for transfer to PC using
  included software

 

Manufacturer: Brookhuis Applied Technologies B.V.
Order no.: FME

FME is a handheld absolute moisture meter for accurate measurement of the moisture content of paper, wood and building materials. The moisture meter features preset characteristic curves for material-specific moisture measurement. To detect moisture, the moisture meter requires external sensors (sold separately - see accessories) that can either be inserted into a material or placed on a material's surface, allowing for either destructive or non-destructive measurement.


- Measuring range: 5-99% for wood / 0-99% for building materials
- Resolution: 0.1%
- Accuracy: ±0.2%

 

Manufacturer: Brookhuis Applied Technologies B.V.
Order no.: FMW-B

The Absolute Moisture Meter FMW-B determines moisture content by means of the capacitive method. In the Absolute Moisture Meter an electromagnetic field quickly determines capacitance of wood. All test instruments come manufacturer calibrated.


- Test / Measurement range: 2 ... 30 % H2O wood / 0 ... 60 %
   building materials

- Resolution: 0.1 %  / Accuracy: ±0.5 % of the reference material
- Memory: 50 measurement values
- Lower frontal sensor
- Non-destructive measurement

 

Manufacturer: Brookhuis Applied Technologies B.V.
Test Instruments manufacturer
Order no.: FMW-T

The Absolute Moisture Meter FMW-T covers all your needs while measuring moisture contents in all types of wood and building materials. The Absolute Moisture Meter works without causing any damage to the material and it is mainly used to measure building walls. All test instruments come manufacturer calibrated.


- Test / Measurement range: 2 ... 30 % H2O wood / 0 ... 60 % building materials
- Resolution: 0.1 %
- ±0.5 % accuracy of reference material
- Memory: 50 measurement values
- Upper frontal sensor
- Non destructive measurement 

 

Manufacturer: Brookhuis Applied Technologies B.V.
Test Instruments manufacturer
Order no.: RH5

RH5 is a penetrating, nondestructive, capacitive absolute moisture meter used to measure temperature and moisture in reels, stacks and piles of paper or cardboard. Featuring data logger and PC interface capabilities, this high-tech paper humidity measuring device measures relative humidity from 0 ... 100% rh, temperature from -10 ... +60 °C / +14 ... +140 °F, and dew point from -55 ... +60 °C / -67 ... 140 °F. Affording a large graphic display and multi-language menu, the easy-to-use RH5:


- Measuring range 0...100% rH, -10...+60°C
- Offers an accuracy of ± 1.5% r.h. and ± 0.1% °C / 0.3 °F
- Supplied with a 295 mm / 11.61" aluminum sword sensor
- Stores up to 10,000 measured values 

 

Manufacturer: Messtechnik Schaller GmbH
Order no.: PCE-SMM 1

PCE-SMM 1 is an absolute moisture meter for soil ideal for use in agriculture, crop science, horticulture, botany, landscaping, gardening and environmental testing applications. This portable handheld moisture meter or analyzer measures soil moisture or humidity quickly, easily and accurately.


- Moisture measurement range: 0 ... 50 %
- Resolution: 0.1 %
- Accuracy: ±5 % +5 digits
- 250 mm / 9.84" long probe

 

Manufacturer: PCE Instruments
Order no.: PCE-WMH-3

PCE-WMH-3 is a portable handheld digital absolute moisture meter or analyzer used to measure the moisture content of wood. This hammer-style wood moisture analyzer features preset characteristic curves for measuring moisture in 270 different wood types.


- Measuring range: 6 ... 60 % moisture content
- Accuracy: ±1 % (within 6 ... 12 % range), ±2 % (13 ... 28 %), ±2 % (29 ... 60 %)
- Resolution: 0.1 %

Manufacturer: PCE Instruments

ISO-Certified Test Instruments Manufacturer

Custom-Made Test Instruments

PCE Instruments offers a wide range of stock products. However, despite an extensive selection of stock product offerings, sometimes a custom product is required to satisfy the specific requirements of a new, groundbreaking or special application.

Are you looking for custom test instruments?
Look no further than PCE Instruments. The DIN EN ISO 9001-certified PCE Product and Development Company GmbH produces customized test instruments tailored to meet the unique needs of a diverse customer base. By capitalizing on the expert knowledge and extensive experience of PCE’s industry-leading Tailored Test Instrumentsengineers and technicians to create custom-built test instruments, customers obtain measuring devices designed specifically for the task at hand.

Throughout the design, development and production process, PCE's engineers and technicians work hand-in-hand with each customer to ensure the final test instrument exceeds expectations. Specifications are clearly defined from the start of the project. Sensors, microprocessors and other electronic components are sourced from high-quality suppliers. Software is written to best support the customer's systems, processes and procedures. Qualified calibration laboratories are tasked with verifying the measurement accuracy of the custom test instrument, and rigorous testing is conducted to make certain that the device will function properly under the anticipated operating conditions.

If you are interested in pursuing the creation of a custom test instrument designed to accommodate an unusual or highly specialized measuring task, please contact the friendly and knowledgable staff at info@industrial-needs.com or +44 (0) 2380 987 035 for PCE Instruments UK, or at info@pce-americas.com or +1 (561) 320-9162 for PCE Americas Inc.