PCE Instruments: Test Instruments

Order no.: PKT-1195

The Automotive Tester PKT-1195 is a device that combine a 2 channel Electrical Tester data logger and a TRMS multimeter. This Automotive Tester PKT-1195 is the ideal solution for many works.


- Oscilloscope/ Bandwidth: 100 MHz
- Horizontal component/ Temporal base: 5 ns - 100 s / div
- Trigger mode: flank, video, alternate,
- Measuring functions: automatic - 19 parameters
- Memory function: 6,000 points

 

£ 779.00

Price excl. VAT &. delivery

Order no.: SKM 1.0

The SKM 1.0 Automotive Tester precisely measures closing forces to prevent personal injuries. The closing Automotive Tester is suitable for measuring forces in the field of automatic doors, windows, and cut off walls; such as in warehouses, general stores, and public offices. The Automotive Tester is delivered manufacturer calibrated and can optionally be certified to ISO standards.

 

- Measurement range: 1000 N
- Resolution: 1 N
- Accuracy: ± 3 N
- External load cell

Manufacturer: HKM-Messtechnik GmbH
£ 396.00

Price excl. VAT &. delivery

Order no.: SKM 2

The SKM 2 Automotive Tester measures closing forces of hydraulic, pneumatic, or electrical constructions like bus-, lift-, train, or cable car windows or sliding roofs to ensure the safety of passengers. The closing Automotive Tester is a must-have for all TUV test centres to ensure an accurate way of work for closing constructions.


- Measuring range: 0 ... 995 N
- Accuracy: ± 10 N
- Measurements of rms and peak values
- Includes calibration certificate 

 

Manufacturer: Hermes & Harrer GmbH
£ 882.00

Price excl. VAT &. delivery

Order no.: STE-3

The STE-3 Automotive Tester is an electronic stethoscope made for acoustic engine diagnosis and operates by using a piezo-transducer that detects even the quietest sound. With the Automotive Tester, defects can be detected or at least narrowed down without stripping down the construction part or engine, and damages due to false storage can be recognized at a very early stage, making it so higher subsequent loss can be avoided.


- Frequency Response: 30 Hz .. 15 kHz
- Volume: adjustable
- Speakers: 8W

 

£ 426.00

Price excl. VAT &. delivery

Order no.: STE06606

This Automotive Tester STE06606 allows the user during driving tests, to hear amplified sound with a professional set of headphones. For difficult diagnoses of driving tests, the highly sensitive microphones of the Automotive Tester STE06606 can be attached with clamps at many points of the vehicle.


Uses:
- diagnosis during road test
- under-bonnet area
- fuel injector 

 

Manufacturer: Hubinont Tools s.a.
£ 143.00

Price excl. VAT &. delivery

Order no.: STE97215

During the road test with the Automotive Tester STE97215, you can determine fast an precise the source and place from the noise, also of long vehicle like lorry and bus. The clamps can be attached at many points of the car like springs, shocks, brakes, superstructure parts of the autobody, motor block, etc.


To be used for:
- diagnosis during road test
- under-bonnet area
- fuel injector

 

Manufacturer: Hubinont Tools s.a.
£ 366.00

Price excl. VAT &. delivery

Order no.: Trummeter

The Automotive Tester Meter Trummeter is an electric device consisting of a measuring probe and a microprocessor to measure the belt tension and checking the strand force of a belt drive. A little impulse or touch will cause vibration. The Automotive Tester will detect the belts frequency and will get the F static clamping force through mass of the belt and the length of the free belt trum.

  • Measuring range: 10 Hz ... 800 Hz
  • Digital sample error: < 1 %
  • Display error: ± 1 Hz
£ 530.00

Price excl. VAT &. delivery

Order no.: PCE-1000N

PCE-1000N is a portable handheld Barcol hardness tester used to measure the hardness of pure aluminum, soft aluminum, thick aluminum alloy and aluminum sheets, strips, rods, castings and forgings. The hardness of fiber-reinforced (FRP) plastics, glass-reinforced (GRP) plastics, hard plastics and soft metals (such as copper or lead) also can be tested using this battery-powered digital Barcol impressor hardness meter.


- Measurement parameters: Barcol (HBA), Brinell (HB), Vickers (HV), Webster (HW),
  Rockwell (HRB / HRE / HRF / HRH)
- Measuring range: 0 ... 100 HBA / 25 ... 150 HB
- Accuracy: 81 .. 88 HBA: ± 1 HBA / 42 ... 48 HBA: ± 2 HBA
- Repeatability: 81 .. 88 HBA: ± 1.5 HBA / 42 ... 48 HBA: ± 2.5 HBA
- Resolution: 0.1 HBA

 

Manufacturer: PCE Instruments
£ 511.00

Price excl. VAT &. delivery

Order no.: PCE-1000N

PCE-1000N is a portable handheld Barcol hardness testing durometer used to measure the hardness of pure aluminum, soft aluminum, thick aluminum alloy and aluminum sheets, strips, rods, castings and forgings. The hardness of fiber-reinforced (FRP) plastics, glass-reinforced (GRP) plastics, hard plastics and soft metals (such as copper or lead) also can be tested using this battery-powered digital Barcol impressor hardness meter.


- Measurement parameters: Barcol (HBA), Brinell (HB), Vickers (HV), Webster (HW), Rockwell
  (HRB / HRE / HRF / HRH)
- Measuring range: 0 ... 100 HBA / 25 ... 150 HB
- Accuracy: 81 .. 88 HBA: ± 1 HBA / 42 ... 48 HBA: ± 2 HBA
- Repeatability: 81 .. 88 HBA: ± 1.5 HBA / 42 ... 48 HBA: ± 2.5 HBA
- Resolution: 0.1 HBA

 

Manufacturer: PCE Instruments
£ 511.00

Price excl. VAT &. delivery

Order no.: PCE-THB 40

PCE-THB 40 is a digital thermometer-hygrometer-barometer with data recording functionality. This compact yet robust data logger detects ambient temperature, relative humidity and atmospheric or barometric pressure. Measurement values are displayed in real time on the large LCD screen and saved to the included SD card as a Microsoft Excel-compatible .XLS file for seamless transfer to a PC or portable computer. Data can also be transferred via an optional USB data cable complete with PC-compatible software (SOFT-LUT-US) for live visualization. Measurement quota can be freely adjusted, with data captured every 5, 10, 30, 60, 120, 300 or 600 seconds, or automatically when there is an alteration of ±1º, ±1% RH or ±1 hPa.


- Ambient temperature range: 0 ... +50 °C / +32 ... +122 °F
- Relative humidity (RH) range: 10 ... 90% RH
- Barometric pressure range: 10 ... 1100 hPa / 7.5 ... 825 mmHg / 0.29 ...
  32.48 inHg

 

Manufacturer: PCE Instruments
£ 137.00

Price excl. VAT &. delivery

Order no.: Basis Weight Balance 572-30

Basis Weight Balance
Top quality in weighing range and equipment.


- Capacity [Max]: 241 g
- Readability [d]: 0.001 g
- Dimensions of weighing plate [Ø/BxT]: 10.6 cm
- Calibratable

Manufacturer: Kern & Sohn GmbH
£ 448.00

Price excl. VAT &. delivery

Order no.: Basis Weight Balance 572-31

Basis Weight Balance
Top quality in weighing range and equipment.


- Capacity [Max]: 301 g
- Readability [d]: 0.001 g
- Dimensions of weighing plate [Ø/BxT]: 10.6 cm
- Calibratable

Manufacturer: Kern & Sohn GmbH
£ 457.00

Price excl. VAT &. delivery

Order no.: Basis Weight Balance 572-32

Basis Weight Balance
Top quality in weighing range and equipment.


- Capacity [Max]: 421 g
- Readability [d]: 0.001 g
- Dimensions of weighing plate [Ø/BxT]: 10.5 cm
- Calibratable

Manufacturer: Kern & Sohn GmbH
£ 465.00

Price excl. VAT &. delivery

Order no.: Basis Weight Balance 572-33

Basis Weight Balance
Top quality in weighing range and equipment.


- Capacity [Max]: 1610 g
- Readability [d]: 0.01 g
- Dimensions of weighing plate [Ø/BxT]: 15 cm
- Calibratable

Manufacturer: Kern & Sohn GmbH
£ 422.00

Price excl. VAT &. delivery

Order no.: Basis Weight Balance 572-35

Basis Weight Balance
Top quality in weighing range and equipment.


- Capacity [Max]: 2410 g
- Readability [d]: 0.01 g
- Dimensions of weighing plate [Ø/BxT]: 15 cm
- Calibratable

Manufacturer: Kern & Sohn GmbH
£ 431.00

Price excl. VAT &. delivery

Order no.: Basis Weight Balance 572-37

Basis Weight Balance
Top quality in weighing range and equipment.


- Capacity [Max]: 3010 g
- Readability [d]: 0.01 g
- Dimensions of weighing plate [Ø/BxT]: 15 cm
- Calibratable

Manufacturer: Kern & Sohn GmbH
£ 439.00

Price excl. VAT &. delivery

Order no.: Basis Weight Balance 572-39

Basis Weight Balance
Top quality in weighing range and equipment.


- Capacity [Max]: 4210 g
- Readability [d]: 0.01 g
- Dimensions of weighing plate [Ø/BxT]: 15 cm
- Calibratable

Manufacturer: Kern & Sohn GmbH
£ 448.00

Price excl. VAT &. delivery

Order no.: Basis Weight Balance 572-43

Basis Weight Balance
Top quality in weighing range and equipment.


- Capacity [Max]: 10100 g
- Readability [d]: 0.1 g
- Dimensions of weighing plate [Ø/BxT]: 160x200 mm
- Calibratable

Manufacturer: Kern & Sohn GmbH
£ 414.00

Price excl. VAT &. delivery

Order no.: Basis Weight Balance 572-45

Basis Weight Balance
Top quality in weighing range and equipment.


- Capacity [Max]: 12100 g
- Readability [d]: 0.05 g
- Dimensions of weighing plate [Ø/BxT]: 160x200 mm
- Calibratable

Manufacturer: Kern & Sohn GmbH
£ 422.00

Price excl. VAT &. delivery

Order no.: Basis Weight Balance 572-49

Basis Weight Balance
Top quality in weighing range and equipment.


- Capacity [Max]: 16100 g
- Readability [d]: 0.1 g
- Dimensions of weighing plate [Ø/BxT]: 160x200 mm
- Calibratable

Manufacturer: Kern & Sohn GmbH
£ 422.00

Price excl. VAT &. delivery


 

Custom made test instruments

Besides a wide range of the products in general and testing instruments, in particular, which you may find on our site for sale, there is also a possibility to get an absolutely unique instrument fitting only your personal need and desire.

Are you looking for custom test instruments?
PCE Instruments custom design group provides test instruments and test equipment for customers that is not available off the shelf (1tailor–made). The Engineering team has been providing high-quality services to global customers since 1999. We can deliver testing solutions to customers that meet their requirements for features, cost, and schedule. As a German manufacturer and supplier of high quality products and test instruments solutions, skilled Test instruments (tailor-made and manufactured in Germany)engineers and technical staff make use of their knowledge and experience for the development and design of new test equipment and test instruments. PCE Instruments will put the expertise to work for you to help specify, setup, integrate, and validate the measurement and inspection equipment you need.

PCE Instruments engineers, technicians, and sales agents, work hand-in-hand with the customer experts to clearly define the specifications to be sure that the final test instruments exceed expectations. We have our own High quality test instruments manufacturerand supplierPCE-branded industrial test instruments series but we can also design and manufacture modified test equipment, especially in the field of force, pressure, vibration, humidity, temperature and moisture measurement, based upon ustomers’ special needs.

PCE uses long-term business relationships with high quality suppliers and qualified calibration laboratories (main measurement parameters as force, vibration and moisture inhouse calibrated) to ensure the costumers not only get the equipment they need, but also industrial, professional services and post-sales technical support. Several cross-country co-operations with universities and technical institutions have proven to push huge achievements in development and production / manufacturing process. Let a PCE Instruments sales representative work with you on a cost-effective custom solution, please call us with your test equipment / test instruments requirement.
ISO certified test instruments manufacturer
Industrial test instruments / testers developed and manufactured by PCE (also for custom made products) come with an ISO manufacturer or factory calibration certificate confirming compliance with the highest possible quality standards in measurement. PCE Produktions- und Entwicklungsgesellschaft mbH is certified according to DIN EN ISO 9001 : 2008.

More information on Test Instruments

IP Housing Protection Classes
The majority of devices and test instruments have got an inscription IP with the two-digit number following the letters, and though the letters ever remain the same IP (Ingress Protection or Internal/International Protection), the numbers may be different, for example, IP20, IP54, IP65, IP67 and the others.

Any customer would like to have test instruments which have got a longer service life, provide reliable results and are robust to various impacts from outside. That is why the housing can be designed in such a way so that to protect the internal “feeling” of the device from the damage that can be caused by water, solid items of different nature, dust, shocks…

The number after IP … … indicates in fact what the device is protected from, since, both, the first and the second digit, have got a particular explanation. “0” always means that there is no protection, and depending on the position of the “0”, the user may detect, either it is not protected against the impact of solids or water. If instead one of the number there is letter X it means that the level of protection on this criterion has not been precisely determined.

The first digit (can be from 0 to 6 or letter X) always indicates the level of protection from the intrusion of solid items or objects coming from outside, including parts of the human body. The smaller the number, the bigger the size of the object may be. Protection agains waterFor example, test instruments with the IP 20 provide protection against the objects bigger than 12 mm, for example, finger. The digits 4, 5, 6 mean the reduction of the size of the object that may intrude, since they provide protection against the thin wire. If the application of the device involves operation in very dirty dusty environment, the device should have at least 5, better 6 as the first digit, since devices with the IP 5…/6… are dust protected / dustproof correspondingly.

The second digit (0 to 8 or letter X) indicates the level of protection from water penetration (water drops, water flow, water sprinkles, immersing into water). An angle at which the water drop or spray can affect the test instruments also matter, so, for example, IP … 2 gives the protection against the water drops at an angle not more than 15°, IP …3 – at an angle not more than 60° (for example, it can be rain), on condition that test instruments are under normal operating conditions. The highest digits 7 / 8 provide full protection even under the condition of immersing the test instruments under water. The devices retain all its functions and operating abilities.

IP 54 is considered to be the standard. It provides sufficient protection for the equipment, not meant to be applied under extreme conditions. It is protected from dust intrusion that can damage the device and is safe from water sprinkles, not depending on the direction or angle.

IP 67 is a higher protection class. 6 is the highest possible protection from the solid particles, thus, it means absolutely dustproof device. 7 indicates very high level of protection from water, even when the device is plunged into the water completely or partly not deeper than 1 m.

0 NO protection 0 NO protection
1 Protection against solid objects (including body parts: hand, foot…) of the size more than 50 mm 1 Protection against falling vertically down drops
2 Protection against solid objects (including fingers), of the size not less than 12 mm 2 Protection against drops, falling at an angle of no more than 15 ° (equipment in the normal position).
3 Protection against solid objects (wire, instruments) with the DIA not less than 2.5 mm 3 Protection against the drops and water jets, falling from the top at an angle to the vertical of no more than 60 ° (equipment in the normal position).
4 Protection against solid objects (wire, instruments) with the DIA not less than 1 mm 4 Protection against dropping or splashing (any angle).
5 Partial protection against dust (the amount of dust penetrating into the device does not influence its operation). Full protection against accidental penetration 5 Protection against water jets (any angle)
6 Full protection against accidental penetration and dust. 6 Protection against water jets (any angle) under all kinds of pressure. But, it means water resistant nor waterproof!
    7 Protection against water ingress during temporary immersion in water. No damage to equipment only at a certain depth and time of immersion.
    8 Protection against water ingress during constant immersion in water. Water does not cause damage to equipment under specified conditions and unlimited time of immersion.


Addition of the third / sometimes fourth symbol is auxiliary, indicating additional functions. For example, IP 69K means the test instruments are not only fully dustproof, but also waterproof and remain safe under the influence of hot water under pressure.

In spite of water resistance, the difference should be made between sweet and salty water. Very often, test instruments with the sufficient IP protection (dust- and water resistant/proof) may fail under the influence of salty water, because of the properties salt has got and its corrosive influence. That is why test instruments meant for application not only under water, but for immersion in salty water, need to have a special mark made by the producer, confirming that the housing has been designed especially for this application. The same applies for very high / cold temperatures or application in the environment containing particles finer than dust.