PCE Instruments: Test Instruments

Order no.: MiniAirJunior

The one channel Anemometer MiniAirJunior is used to detect the air flow rate of gaseous fluids. The one channel Anemometer is portable and user-friendly. Quick measurement of air, gases, and liquids. Automatic probe identification. The test instrument come manufacturer calibrated. ISO certification can be made as an option.


- Measuring units: m/s
- Measuring media plastic sensor: non-aggressive gases
- Display: LCD, 4 characters
- Measurement rate: 2 measurements / s

 

£ 378.00

Price excl. VAT &. delivery

Order no.: N.E.W.S.

Skywatch® N.E.W.S. is an autonomous meteorological station designed for monitoring the atmospheric conditions at a site. It is fitted with a meteorological transmitter that measures wind, temperature, relative humidity, and (as an option) barometric pressure.


WINDSPEED
Measuring range: 3 ... 200 km/h
Accuracy: ± 3%

TEMPERATURE
Measuring range: -40 … +90 °C
Accuracy: ± 0.4°C (at 25°C)

RELATIVE HUMIDITY
Measuring range: 0 … 100 %rH
Accuracy: ± 3% rH (20 to 80%rH)

PRESSURE (option)
Measuring range: 750 … 1100 mbar
Absolute accuracy: ± 1.5 mbar

 

Manufacturer: JDC
£ 3,666.64

Price excl. VAT &. delivery

Order no.: P-770-M

The P-770-M anemometer is ideal for measurements that require high precision or that need documentation in real time. All the test instruments come manufacturer calibrated. ISO certification can be made as an option.


- Measuring range air: 0.02 ... 40 m/s
- Accuracy: ± 1% of final value
- Interface: USB
- External impeller sensor
- Storage

 

Manufacturer: PCE Instruments
£ 276.00

Price excl. VAT &. delivery

Order no.: PCE-007

Anemometer with port, memory, software for wind speed, temperature and air flow. All the test instruments come manufacturer calibrated. ISO certification can be made as an option.


- Wind speed: 0.01 m/s, accuracy ±3% ±0.1
- Air temperature: 0.2°C, accuracy ±1°C
- Air flow: 0.001 to 100, accuracy calculated from the wind speed
  and surface

 

Manufacturer: PCE Instruments
£ 194.00

Price excl. VAT &. delivery

Order no.: PCE-009

Anemometer to measure air temperature and velocity with calculation of volume of air current and RS-232. All the test instruments come manufacturer calibrated. ISO certification can be made as an option.


- Measurement range: 0.2 to 20.0 m/s
- Measurement range: 0.0 to 50.0  °C (sensor)
- Volume of air current:  0 to 36,000 m3/min
- Internal memory: 16,000 values

 

Manufacturer: PCE Instruments
£ 366.00

Price excl. VAT &. delivery

Order no.: PCE-423

The PCE-423 Anemometer with thermal sensor is highlighted by its good relation between price and quality. The PCE-423 Anemometer has a high resolution to be used for different applications. All the test instruments come manufacturer calibrated. ISO certification can be made as an option.


- m/s: 0.1 ... 25.0
- feet/min: 20 ... 4925
- knots: 0.2 ... 48.5 

 

Manufacturer: PCE Instruments
£ 125.00

Price excl. VAT &. delivery

Order no.: PCE-A420

Digital cup vane Anemometer, wind direction will not influence the measurement. All the test instruments come manufacturer calibrated. ISO certification can be made as an option.


- 0.9 to 35.0 m/s
- 2.5 to 126.0 km/h
- 1.4 to 68.0 knots
- 1.6 to 78.2 miles/h

 

Manufacturer: PCE Instruments
£ 108.00

Price excl. VAT &. delivery

Order no.: PCE-AM81

The PCE-AM81 handheld Anemometer, with its wheel sensor, is ideal for determining wind speed inside or outside. The light-weight, portable Anemometer allows you to take measurements quickly and on the spot. This instrument comes manufacturer calibrated, with ISO certification as an option.


- Type of sensor: Wing Sensor
- Measurement Range: 0.4 m/s ... 30.0 m/s
- Resolution: 0.1 m/s
- Accuracy: ±3 % F.S. (<20 m/s) / ±4 % F.S. (>20 m/s)

 

Manufacturer: PCE Instruments
£ 48.00

Price excl. VAT &. delivery

Order no.: PCE-FWS 20-1

The Air Humidity Meter combines various functions and sensors in only one instrument: Air Humidity Meter, Wind direction, Wind speed, Temperature meter, rainfall, and data logger. Furthermore, the meteorological station has different alarm functions and settings for the measurement parameters. The measured data can be sent by radio to the base unit (max. distance of 100 m). This test instrument is equipped with the latest technology used in meteorological analysis. The touch screen allows you to recall data onto the screen easily.


- 2 Displays
- Wireless Weather Station
- Touchscreen
- Windows software
- Data logger

 

Manufacturer: PCE Instruments
£ 106.00

Price excl. VAT &. delivery

Order no.: PCE-FWS 20-2

The Air Humidity Meter combines various functions and sensors in only one instrument: Air Humidity Meter, Wind direction, Wind speed, Temperature meter, rainfall, and data logger. Furthermore, the meteorological station has different alarm functions and settings for the measurement parameters. The measured data can be sent by radio to the base unit (max. distance of 100 m). This test instrument is equipped with the latest technology used in meteorological analysis. The touch screen allows you to recall data onto the screen easily.


- 3 Displays
- Wireless Weather Station
- Touchscreen
- Windows software
- Data logger

 

Manufacturer: PCE Instruments
£ 140.00

Price excl. VAT &. delivery

Order no.: PCE-TA 30

The PCE-TA 30 Anemometer can measure air velocity, air temperature and air flow. The PCE-TA 30 Anemometer shows measurement values in its large backlight LCD display. The Anemometer shows the current value on the display as well as max. and min. values.


- Type of sensor: Wind Sensor
- External
- Memory: No
- Interface: No
- Measurement range: 1.0 ... 30.0 m/s
- Resolution: 0.01 m/s
- Accuracy: ±3% ±0.2 m/s

 

Manufacturer: PCE Instruments
£ 57.00

Price excl. VAT &. delivery

Order no.: PCE-THA 10

The anemometer PCE-THA 10 is easy to operate with one hand thanks to its compact size, the new structure and integrated impeller. In addition to the wind speed, the anemometer measures the temperature, humidity, dew point, the wet bulb temperature and the air volume. Average values ??can be determined with the anemometer from the 20 preset points. All the test instruments come manufacturer calibrated. ISO certification can be made as an option.


- Temperature measuring range: -15 ... +50 °C.
- Humidity range: 5 ... 95% RH
- Air speed: 0.4 ... 35 m / s
- Air flow: 0 ... 9,999 m3 / s 

 

Manufacturer: PCE Instruments
£ 74.00

Price excl. VAT &. delivery

Order no.: PCE-VA 20

The impeller anemometer is a measuring instrument for various wind related parameters. It has got an impeller diameter of ten centimeters. Moreover, if required, it is possible to order a set of flow hoods which provide a fast and reliable method which helps to use the 100 mm (4-inch) large impeller head optimally.


- Wind speed measurement range: 0.2 ... 30 m / sec
- 10 cm diameter impeller
- Backlight
- Automatic power off
- Extreme value measurement 

 

Manufacturer: PCE Instruments
£ 172.00

Price excl. VAT &. delivery

Order no.: PCE-VA 20-SET

The impeller anemometer is a measuring instrument for various wind related parameters. It has got an impeller diameter of ten centimeters. Moreover, if required, it is possible to order a set of flow hoods which provide a fast and reliable method which helps to use the 100 mm (4-inch) large impeller head optimally.


- Wind speed measurement range: 0.2 ... 30 m / sec
- 10 cm diameter impeller
- Backlight
- Automatic power off
- Extreme value measurement
- incl. flow hood

 

Manufacturer: PCE Instruments
£ 283.00

Price excl. VAT &. delivery

Order no.: PCE-WL 1

The anemometer PCE-WL 1 is an ideal tool to measure and store the wind speed over a long period of time. The battery operation enables you to use the anemometer for mobile applications. Since a wind power station is an expensive investment, you usually want to know what profits it will generate in advance. The anemometer PCE-WL1 helps you determine these profits.


- Measuring range: 0.8 ... 40 m/s
- Accuracy: ± 0.5 m/s or 5% of measurement value
- battery life up to 3 years
- 512 MB microSD card incl.

 

Manufacturer: PCE Instruments
£ 332.00

Price excl. VAT &. delivery

Order no.: PCE-WL 2

The Anemometer PCE-WL 2 is used to measure current wind situation before starting wind energy plants. The wind sensor saves measured data for wind direction and wind speed on a SD memory card. All the test instruments come manufacturer calibrated. ISO certification can be made as an option.


- Mobile use
- Wind speed: 1 ... 40 m / s
- Wind direction: 2.5° ... 357.5°
- Storage 

 

Manufacturer: PCE Instruments
£ 594.00

Price excl. VAT &. delivery

Order no.: PCE-FWS 20

The PCE-FWS 20 Anemometer Station is a multi-functional wireless digital device that will exceed your expectations. This manufacturer-calibrated meteorological instrument accurately measures temperature, relative humidity, precipitation, atmospheric pressure, wind speed and wind direction. Featuring a free-standing or wall-mountable touchscreen LED display with backlight, the PCE-FWS 20 makes a fantastic gift.


- Indoor temperature in Celsius or Fahrenheit
- Outdoor temperature in Celsius or Fahrenheit
- Indoor air humidity / outdoor humidity
- Air pressure indication in Hg or hPa
- Absolute or relative air pressure display selectable
- Precipitation indicator in mm or inch
- Precipitation indicator for 1 hour, 24 hours, 1 week, 1 month.
- Wind speed in mph, km / h, m / s, knots ...
- Wind direction indicator
- Wind Chill Temperature Display
- Weather forecast, tendency indicator, storm warning

 

Manufacturer: PCE Instruments
£ 75.00

Price excl. VAT &. delivery

Order no.: ThermoAir3D1

The Anemometer ThermoAir3 specialises in measurements of very low air flows and determinations of turbulence grades. The humidity can also be determined with the separate humidity sensor. All the test instruments come manufacturer calibrated. ISO certification can be made as an option.


- Measuring range: 0.01 ... 1 m/s / 0...40 °C
- Directional sensor

 

£ 1,814.00

Price excl. VAT &. delivery

Order no.: ThermoAir3D5

The Anemometer ThermoAir3D5 specialises in measurements of very low air flows and determinations of turbulence grades. The humidity can also be determined with the separate humidity sensor. All the test instruments come manufacturer calibrated. ISO certification can be made as an option.


- Measuring range: 0.01 ... 5 m/s / 0...40 °C
- Directional sensor

 

£ 1,887.00

Price excl. VAT &. delivery

Order no.: WWS-KIT1

A multi-directional turbine (wind sensor) enabling measurement of the wind in the horizontal plane and in the vertical as well (turbulence behind objects). The turbine sends its signal magnetically to a transducer located at the end of the cable connected to the display. WindMeter WWS-KIT1 includes only the visual and acoustic alarms.


Units: km/h, m/s, mph, fps and knots
Resolution: 0.1 unit
Measurement cycle: each second
Accuracy: +/- 3 % if horizontally (Windsens3D)
Measuring range: from 5 to 150 km/h
Alarms: 2 min / 2 max

 

Manufacturer: JDC ELECTRONIC SA
£ 173.00

Price excl. VAT &. delivery


 

Custom made test instruments

Besides a wide range of the products in general and testing instruments, in particular, which you may find on our site for sale, there is also a possibility to get an absolutely unique instrument fitting only your personal need and desire.

Are you looking for custom test instruments?
PCE Instruments custom design group provides test instruments and test equipment for customers that is not available off the shelf (1tailor–made). The Engineering team has been providing high-quality services to global customers since 1999. We can deliver testing solutions to customers that meet their requirements for features, cost, and schedule. As a German manufacturer and supplier of high quality products and test instruments solutions, skilled Test instruments (tailor-made and manufactured in Germany)engineers and technical staff make use of their knowledge and experience for the development and design of new test equipment and test instruments. PCE Instruments will put the expertise to work for you to help specify, setup, integrate, and validate the measurement and inspection equipment you need.

PCE Instruments engineers, technicians, and sales agents, work hand-in-hand with the customer experts to clearly define the specifications to be sure that the final test instruments exceed expectations. We have our own High quality test instruments manufacturerand supplierPCE-branded industrial test instruments series but we can also design and manufacture modified test equipment, especially in the field of force, pressure, vibration, humidity, temperature and moisture measurement, based upon ustomers’ special needs.

PCE uses long-term business relationships with high quality suppliers and qualified calibration laboratories (main measurement parameters as force, vibration and moisture inhouse calibrated) to ensure the costumers not only get the equipment they need, but also industrial, professional services and post-sales technical support. Several cross-country co-operations with universities and technical institutions have proven to push huge achievements in development and production / manufacturing process. Let a PCE Instruments sales representative work with you on a cost-effective custom solution, please call us with your test equipment / test instruments requirement.
ISO certified test instruments manufacturer
Industrial test instruments / testers developed and manufactured by PCE (also for custom made products) come with an ISO manufacturer or factory calibration certificate confirming compliance with the highest possible quality standards in measurement. PCE Produktions- und Entwicklungsgesellschaft mbH is certified according to DIN EN ISO 9001 : 2008.

More information on Test Instruments

IP Housing Protection Classes
The majority of devices and test instruments have got an inscription IP with the two-digit number following the letters, and though the letters ever remain the same IP (Ingress Protection or Internal/International Protection), the numbers may be different, for example, IP20, IP54, IP65, IP67 and the others.

Any customer would like to have test instruments which have got a longer service life, provide reliable results and are robust to various impacts from outside. That is why the housing can be designed in such a way so that to protect the internal “feeling” of the device from the damage that can be caused by water, solid items of different nature, dust, shocks…

The number after IP … … indicates in fact what the device is protected from, since, both, the first and the second digit, have got a particular explanation. “0” always means that there is no protection, and depending on the position of the “0”, the user may detect, either it is not protected against the impact of solids or water. If instead one of the number there is letter X it means that the level of protection on this criterion has not been precisely determined.

The first digit (can be from 0 to 6 or letter X) always indicates the level of protection from the intrusion of solid items or objects coming from outside, including parts of the human body. The smaller the number, the bigger the size of the object may be. Protection agains waterFor example, test instruments with the IP 20 provide protection against the objects bigger than 12 mm, for example, finger. The digits 4, 5, 6 mean the reduction of the size of the object that may intrude, since they provide protection against the thin wire. If the application of the device involves operation in very dirty dusty environment, the device should have at least 5, better 6 as the first digit, since devices with the IP 5…/6… are dust protected / dustproof correspondingly.

The second digit (0 to 8 or letter X) indicates the level of protection from water penetration (water drops, water flow, water sprinkles, immersing into water). An angle at which the water drop or spray can affect the test instruments also matter, so, for example, IP … 2 gives the protection against the water drops at an angle not more than 15°, IP …3 – at an angle not more than 60° (for example, it can be rain), on condition that test instruments are under normal operating conditions. The highest digits 7 / 8 provide full protection even under the condition of immersing the test instruments under water. The devices retain all its functions and operating abilities.

IP 54 is considered to be the standard. It provides sufficient protection for the equipment, not meant to be applied under extreme conditions. It is protected from dust intrusion that can damage the device and is safe from water sprinkles, not depending on the direction or angle.

IP 67 is a higher protection class. 6 is the highest possible protection from the solid particles, thus, it means absolutely dustproof device. 7 indicates very high level of protection from water, even when the device is plunged into the water completely or partly not deeper than 1 m.

0 NO protection 0 NO protection
1 Protection against solid objects (including body parts: hand, foot…) of the size more than 50 mm 1 Protection against falling vertically down drops
2 Protection against solid objects (including fingers), of the size not less than 12 mm 2 Protection against drops, falling at an angle of no more than 15 ° (equipment in the normal position).
3 Protection against solid objects (wire, instruments) with the DIA not less than 2.5 mm 3 Protection against the drops and water jets, falling from the top at an angle to the vertical of no more than 60 ° (equipment in the normal position).
4 Protection against solid objects (wire, instruments) with the DIA not less than 1 mm 4 Protection against dropping or splashing (any angle).
5 Partial protection against dust (the amount of dust penetrating into the device does not influence its operation). Full protection against accidental penetration 5 Protection against water jets (any angle)
6 Full protection against accidental penetration and dust. 6 Protection against water jets (any angle) under all kinds of pressure. But, it means water resistant nor waterproof!
    7 Protection against water ingress during temporary immersion in water. No damage to equipment only at a certain depth and time of immersion.
    8 Protection against water ingress during constant immersion in water. Water does not cause damage to equipment under specified conditions and unlimited time of immersion.


Addition of the third / sometimes fourth symbol is auxiliary, indicating additional functions. For example, IP 69K means the test instruments are not only fully dustproof, but also waterproof and remain safe under the influence of hot water under pressure.

In spite of water resistance, the difference should be made between sweet and salty water. Very often, test instruments with the sufficient IP protection (dust- and water resistant/proof) may fail under the influence of salty water, because of the properties salt has got and its corrosive influence. That is why test instruments meant for application not only under water, but for immersion in salty water, need to have a special mark made by the producer, confirming that the housing has been designed especially for this application. The same applies for very high / cold temperatures or application in the environment containing particles finer than dust.