The Air Flow Meter PCE-WSAC 50-111 can be used in different fields of application. In use, the air flow meter carries out measurements from the smallest wind movements. The air flow meter can be used to monitor and alert on the current wind speed.
- Wind measuring device with adjustable alarms - 2 alarm types - Supply voltage: 230 V AC - Input signal: 4 ... 20 mA - Communication: RS485 - Sensor supply via evaluation device - Degree of protection: IP66 - Incl. ISO calibration certificate
The Air Flow Meter PCE-WSAC 50-120 can be used in different fields of application. In use, the air flow meter carries out measurements from the smallest wind movements. The air flow meter can be used to monitor and alert on the current wind speed.
- Wind measuring device with adjustable alarms - 2 alarm types - Supply voltage: 230 V AC - Input signal: 0 ... 10 V - Sensor supply via evaluation device - Degree of protection: IP66 - Incl. ISO calibration certificate
The Air Flow Meter PCE-WSAC 50-121 can be used in different fields of application. In use, the air flow meter carries out measurements from the smallest wind movements. The air flow meter can be used to monitor and alert on the current wind speed.
- Wind measuring device with adjustable alarms - 2 alarm types - Supply voltage: 230 V AC - Input signal: 0 ... 10 V - Communication: RS485 - Sensor supply via evaluation device - Degree of protection: IP66 - Incl. ISO calibration certificate
The Air Flow Meter PCE-WSAC 50-210 can be used in different fields of application. In use, the air flow meter carries out measurements from the smallest wind movements. The air flow meter can be used to monitor and alert on the current wind speed.
- Wind measuring device with adjustable alarms - 2 alarm types - Supply voltage: 115 V AC - Input signal: 4 ... 20 mA - Sensor supply via evaluation device - Degree of protection: IP66 - Incl. ISO calibration certificate
The Air Flow Meter PCE-WSAC 50-211 can be used in different fields of application. In use, the air flow meter carries out measurements from the smallest wind movements. The air flow meter can be used to monitor and alert on the current wind speed.
- Wind measuring device with adjustable alarms - 2 alarm types - Supply voltage: 115 V AC - Input signal: 4 ... 20 mA - Communication: RS485 - Sensor supply via evaluation device - Degree of protection: IP66 - Incl. ISO calibration certificate
The Air Flow Meter PCE-WSAC 50-220 can be used in different fields of application. In use, the air flow meter carries out measurements from the smallest wind movements. The air flow meter can be used to monitor and alert on the current wind speed.
- Wind measuring device with adjustable alarms - 2 alarm types - Supply voltage: 115 V AC - Input signal: 0 ... 10 V - Sensor supply via evaluation device - Degree of protection: IP66 - Incl. ISO calibration certificate
The Air Flow Meter PCE-WSAC 50-221 can be used in different fields of application. In use, the air flow meter carries out measurements from the smallest wind movements. The air flow meter can be used to monitor and alert on the current wind speed.
- Wind measuring device with adjustable alarms - 2 alarm types - Supply voltage: 115 V AC - Input signal: 0 ... 10 V - Communication: RS485 - Sensor supply via evaluation device - Degree of protection: IP66 - Incl. ISO calibration certificate
The Air Flow Meter PCE-WSAC 50-310 can be used in different fields of application. In use, the air flow meter carries out measurements from the smallest wind movements. The air flow meter can be used to monitor and alert on the current wind speed.
- Wind measuring device with adjustable alarms - 2 alarm types - Supply voltage: 24 V DC - Input signal: 4 ... 20 mA - Sensor supply via evaluation device - Degree of protection: IP66 - Incl. ISO calibration certificate
The Air Flow Meter PCE-WSAC 50-311 can be used in different fields of application. In use, the air flow meter carries out measurements from the smallest wind movements. The air flow meter can be used to monitor and alert on the current wind speed.
- Wind measuring device with adjustable alarms - 2 alarm types - Supply voltage: 24 V DC - Input signal: 4 ... 20 mA - Communication: RS485 - Sensor supply via evaluation device - Degree of protection: IP66 - Incl. ISO calibration certificate
The Air Flow Meter PCE-WSAC 50-320 can be used in different fields of application. In use, the air flow meter carries out measurements from the smallest wind movements. The air flow meter can be used to monitor and alert on the current wind speed.
- Wind measuring device with adjustable alarms - 2 alarm types - Supply voltage: 24 V DC - Input signal: 0 ... 10 V - Sensor supply via evaluation device - Degree of protection: IP66 - Incl. ISO calibration certificate
The Air Flow Meter PCE-WSAC 50-321 can be used in different fields of application. In use, the air flow meter carries out measurements from the smallest wind movements. The air flow meter can be used to monitor and alert on the current wind speed.
- Wind measuring device with adjustable alarms - 2 alarm types - Supply voltage: 24 V DC - Input signal: 0 ... 10 V - Communication: RS485 - Sensor supply via evaluation device - Degree of protection: IP66 - Incl. ISO calibration certificate
The Air Flow Meter PCE-WSAC 50W 230 is primarily used to measure and monitor the wind load on cranes or wind turbines. Furthermore, the wind situation can be measured and analyzed before commissioning a wind turbine. The high measuring range of up to 50 m/s of the air flow meter means stormy gusts can also be monitored.
- Measuring range up to 180 km / h
- Input: Pulse, analogue (4 ... 20-mA) or radio transmission
- 4 ... 20-mA analogue output
- Supply voltage: 110 ... 230V AC, 50/60 Hz
- Ambient temperature -20 .. . 70°C / -4 ... 158°F
- Units adjustable: km / h, mph, m / s
The
Air Flow Meter PCE-WSAC 50W 230-ICA is useful for measuring the wind speed to
help determine the preferred site for a wind turbine installation. The
device also monitors the wind load on existing wind farms, as well as on
cranes for safety purposes. Due to the integrated 4 ... 20-mA analogue output of the air flow meter, the measured data can also be transferred to other controllers
for evaluation.
- Measuring range up to 180 km / h
- Input: Pulse, analogue (4 ... 20-mA) or radio transmission
- 4 ... 20-mA analogue output
- Supply voltage: 110 ... 230V AC, 50/60 Hz
- Ambient temperature -20 .. . 70°C / -4 ... 158°F
- Units adjustable: km / h, mph, m / s
- Incl. ISO calibration certificate
The Air Flow Meter PCE-WSAC 50W is primarily used to measure and monitor the wind load on cranes or wind turbines. Furthermore, the wind situation can be measured and analyzed before commissioning a wind turbine.
The high measuring range of up to 50 m/s of the air flow meter means stormy gusts can also be monitored.
- Measuring range up to 180 km / h
- Input: pulse, analogue (4 ... 20-mA) or radio transmission
- 4 ... 20-mA analog output
- Supply voltage: 24V DC
- Ambient temperature -20 ... 70°C / -4 ... 158°F
- units adjustable: km / h, mph, m / s
The air flow meter PCE-WSAC 50W 24-ICA is primarily used to measure and monitor the wind load on cranes or wind turbines. Furthermore, the wind situation can be measured and analyzed before commissioning a wind turbine. Due to the integrated 4 ... 20-mA analogue output of the air flowmeter, the measured data can also be transferred to other controllers
for evaluation.
- Measuring range up to 180 km / h
- Input: pulse, analogue (4 ... 20-mA) or radio transmission
- 4 ... 20-mA analog output
- Supply voltage: 24V DC
- Ambient temperature -20 ... 70°C / -4 ... 158°F
- Units adjustable: km / h, mph, m / s
- Incl. ISO calibration certificate
The Air Flow Meter was developed to measure the wind direction in the industrial environment. This Air Flow Meter can be connected to data loggers, process control systems, displays. A 4 ... 20 mA signal is available as an output signal on the Air Flow Meter.
This air flow meter station with outside sensor is a real all-rounder. The wireless air flow meter station with outside sensor is easy to assemble based on the instructions provided.
You do not have to be a professional to operate the wireless air flow meter station and outside sensors.
The weather data of the air flow meter station with outside sensor for different parameters are sent up to 100 meters by radio signal to the main station.
- Indoor temperature in Celsius or Fahrenheit
- Outside temperature in Celsius or Fahrenheit
- Indoor air humidity / outdoor air humidity
- Air pressure gauge in inHg or hPa
- Absolute or relative air pressure display selectable
- Precipitation indication in mm or inch
- Precipitation indicator for 1 hour, 24 hours, 1 week, 1 month
- Wind speed in mph, km / h, m / s, knots ...
- Wind direction indicator
- Wind chill temperature gauge
- Weather forecast, trend indicator, storm warning - and much more...
This air flow meter station with outside sensor is a real all-rounder. The wireless air flow meter station with outside sensor is easy to assemble based on the instructions provided.
You do not have to be a professional to operate the wireless air flow meter station and outside sensors.
The weather data of the air flow meter station with outside sensor for different parameters are sent up to 100 meters by radio signal to the main station.
- 2 displays
- Indoor temperature in Celsius or Fahrenheit
- Outside temperature in Celsius or Fahrenheit
- Indoor air humidity / outdoor air humidity
- Air pressure gauge in inHg or hPa
- Absolute or relative air pressure display selectable
- Precipitation indication in mm or inch
- Precipitation indicator for 1 hour, 24 hours, 1 week, 1 month
- Wind speed in mph, km / h, m / s, knots ...
- Wind direction indicator
- Wind chill temperature gauge
- Weather forecast, trend indicator, storm warning - and much more...
PCE Instruments offers a wide range of stock products. However, despite an extensive selection of stock product offerings, sometimes a custom product is required to satisfy the specific requirements of a new, groundbreaking or special application.
Are you looking for custom test instruments?
Look no further than PCE Instruments. The DIN EN ISO 9001-certified PCE Product and Development Company GmbH produces customized test instruments tailored to meet the unique needs of a diverse customer base. By capitalizing on the expert knowledge and extensive experience of PCE’s industry-leading engineers and technicians to create custom-built test instruments, customers obtain measuring devices designed specifically for the task at hand.
Throughout the design, development and production process, PCE's engineers and technicians work hand-in-hand with each customer to ensure the final test instrument exceeds expectations. Specifications are clearly defined from the start of the project. Sensors, microprocessors and other electronic components are sourced from high-quality suppliers. Software is written to best support the customer's systems, processes and procedures. Qualified calibration laboratories are tasked with verifying the measurement accuracy of the custom test instrument, and rigorous testing is conducted to make certain that the device will function properly under the anticipated operating conditions.
If you are interested in pursuing the creation of a custom test instrument designed to accommodate an unusual or highly specialized measuring task, please contact the friendly and knowledgable staff at info@industrial-needs.com or +44 (0) 161-464902-5 for PCE Instruments UK, or at info@pce-americas.com or +1 (561) 320-9162 for PCE Americas Inc.
engineers and technicians to create custom-built test instruments, customers obtain measuring devices designed specifically for the task at hand.
