PCE Instruments: Test Instruments

Order no.: PCE-VM 40A

The PCE-VM 40A Accelerometer was designed for vibration and shock metering on buildings, bridges, towers, and other artificial structures. The Accelerometer measures vibrations in accordance to DIN 4150-3, BS 7385 and SN 640312A standards. With its internal memory for up to 100,000 readings, the PCE-VM 40A Accelerometer can determine the effects of construction sites, traffic, or industrial processing on buildings over a long period of time.


- Designed for building / construction vibration logging and
  analysis
- Triaxial acceleration meter
- In accordance with BS 7385 standard
- Integrated NiMH battery
- FFT analysis

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VM 40B

The PCE-VM 40B Accelerometer with SMS alert functionality was designed for vibration and shock metering on buildings, bridges, towers, and other artificial structures. The Accelerometer measures vibrations in accordance to DIN 4150-3, BS 7385 and SN 640312A standards. With its internal memory for up to 100,000 readings, the PCE-VM 40B Accelerometer can determine the effects of construction sites, traffic, or industrial processing on buildings over a long period of time.


- Triaxial acceleration meter
- In accordance with BS 7385 standard
- Quad band GSM
- SMS alarm notifications

- Memory size of 100,000 values (SD card)
- Integrated NiMH battery
- FFT analysis

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VT 1100

The PCE-VT 1100 Accelerometer is designed for quick measurements of an imbalance in machines and the examination of bearings and gears. The Accelerometer is also frequently used to evaluate the state of small electronic motors. Meter can only be used for realtime measurement, no memory storage.


- Vibration Acceleration: 0.01 ... 199.9 m/s2 (peak value)
- Vibration Speed: 0.01 ... 199.9 mm/s (effective)
-
Vibration Displacement:  0.001 ... 1.999 mm (peak-peak)
- Accuracy: ±5%, ±2 Digits (20 Hz ... 1 KHz) / ±10%, ±2 Digits (10 Hz ... 20 Hz)
- Frequency: Accel. and Vel. 10 Hz ... 1 kHz, Displacement 10 Hz ... 500 Hz
- Frequency range: 10 Hz ... 1 kHz 
- Needle probes: 10mm / 0.39" // 45mm / 1.77"


Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VT 1100S

The PCE-VT 1100S accelerometer is suitable for relative measurements on various machines. With the 45 mm long needle probe, you can access hard-to-reach places in machines and motors. For this reason, this accelerometer is used for rapid measurement of imbalance and for checking bearing and gear conditions.

- Frequency range: 10 Hz ... 1 kHz
- Measures speed, distance, acceleration
- Holds the reading after each measurement
- Handy and battery operated
- Needle probe: 45mm / 1.77"

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VT 2700

PCE-VT 2700 is a factory-calibrated (certificate included) portable digital battery-powered accelerometer used to monitor the radial and axial vibration of industrial machines, equipment and parts such as bearings and gearboxes.


- Frequency range: 9 Hz ... 1 kHz (in 1 kHz mode) /
  9 Hz ... 10 kHz
(in 10 kHz mode) acceleration; 10 Hz ... 1 kHz velocity /
  displacement
- Resolution: 0.1 m/s2 / 0.1 yd/s2; 0.1 mm/s / 0.003 in/s;
  1 µm / 3.3814e-14 oz ; 1 rpm
- Accuracy: ± 5% of reading + 2 digits
- ISO calibration certificate included

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VT 2800

The PCE-VT 2800 Accelerometer measures acceleration, oscillation speed and shift of vibrating parts, machines and equipment. The device features an integrated data logger to record vibration measurements over time. Measurement data is stored on an SD card memory (sold separately) and can be transferred directly to a PC via USB or RS-232 interface.


- Handheld instrument with vibration data logging function
- Frequency range: 10 Hz ... 1 KHz
- True-RMS (TRMS), max-hold, data-hold and peak-value
  functionality
- Adjustable sampling rate

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: ACCTRI
- digital interface - relay interface - easy installation through module slot in temperature gauge PCE-IR10
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-SD 150SST C
Verifiable waterproof accurate scale in stainless steel with separate indicator (no corrosion). The multifunctional scale is manufactured to IP67, dust-tight and thus can also be temporarily submerged completely under water (up to 1 m depth). - verifiable -

- Test / Weighing capacity: 150 kg
- Readability: 50g
- Calibration value: 50 g
- Weighing surface: 600 x 500 mm
- Verifiable M III
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CRC 10
The Adhesion Tester PCE-CRC 10 is designed to determine the quality of the adhesion of coatings. The Adhesion Tester is suitable for thin, thick or tough coatings on all surfaces. Since the adherence of paintings and other coatings is a crucial product and quality characteristic for their protective effect, adhesion testers are used in a wide range of industries.

 

- Evaluation of adhesion
- For thin, thick or tough coatings
- Large, non-slip grip
- Various blades selectable

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-TAT 10

The simple design and an absolutely straightforward operation make it possible for the practitioner to use the adhesion tester as an instrument for daily adhesion tests. Using adhesive with rapid curing, the tests can be performed by the user in the shortest possible time.


- Breakout force: 200 kg
- Diameter of base dolly, mm: 15.1 (№ 1) and 19.5 (№ 2)
- Specific breakout force, MPa: Dolly №1 up to 10 MPa (100) Dolly
  №2 up to 6 MPa (60)

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PT-AT

The PT-AT Adhesion Tester measures the traction force necessary to remove a defined area of a coating from a subsurface. The surface condition of the testing material is of significance regarding the measurement of extraction force or adherence. Traction force will be shown on the LC display of the Adhesion Tester and will give information about the adherence to the substrate material.


- Measuring range: 20 MPa / 2900 psi
- Interface: RS-232
- Easy to use
- Internal memory

 

Manufacturer: DeFelsko Corporation
Test Instruments manufacturer
Order no.: PT-AT-A

The PT-AT-A Adhesion Tester measures adhesion of coatings to metal, wood, concrete, and other solid substrates and features a new electronically controlled hydraulic pump. All the test instruments come manufacturer calibrated, with optional ISO certification.


- Measuring range: 20 MPa (3000 psi)
- Resolution: 0.01 MPa (1 psi)
- Accuracy: ± 1 % (full scale)

 

Manufacturer: DeFelsko Corporation
Test Instruments manufacturer
Order no.: PCE-CRC-KB
1 x roll of adhesive tape PCE-CRC-KB (12.7 mm x 32.9 m)
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: ACCTMG
Mounting bracket adjustable in 2 axes for the measuring head of the temperature gauge PCE-IR10; enables the exact alignment.
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VA 11

The Air and Temperature Meter PCE-VA 11 is an extensively used measuring instrument. This temperature meter offers the opportunity to determine air speeds, air temperature and infrared temperature. The illuminated LCD allows comfortable readings and facilitates use in dimly lit areas.


- Air speed range: 0.4 ... 30 m/s / 0.9 ... 67 mph
- Air flow range: 0 ... 9999 CFM / CMM
- Air temperature range: -10 ... 60°C / 14 ... 140°F
- IR temperature range: -50 ... 500°C / -58 ... 932°F

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-VA 11-ICA

The Air and Temperature Meter PCE-VA 11 is a useful and versatile device for measuring air speeds, air temperature and infrared temperature. Thanks to the fast response time of the device, real-time measurement is possible without problems. The large display provides an accurate overview of the measured values.


- Air speed range: 0.4 ... 30 m/s / 0.9 ... 67 mph
- Air flow range: 0 ... 9999 CFM / CMM
- Air temperature range: -10 ... 60°C / 14 ... 140°F
- IR temperature range: -50 ... 500°C / -58 ... 932°F
- USB interface
- Incl. ISO Calibration Certificate 

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-007

Air flow meter with port, memory, software for wind speed, temperature and air flow. These test instruments are calibrated by the manufacturer. An ISO calibration certificate is available as an option.

- Speed measurement up to 45 m/s or 100 mph
- Wind speed: 0.01 m/s, accuracy ±3% ±0.1
- Air temperature: 0.2°C / 32.4°F, accuracy ±1°C / 33.8°F
- Air flow: 0.001 to 100, accuracy calculated from the wind speed and surface

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-423

The PCE-423 Airflow Meter with thermal sensor is highlighted by its good relation between price and quality. The PCE-423 Airflow Meter has a high resolution to be used for different applications. This PCE-423 Airflow Meter. It belongs to the the basic equipment for professionals working with ventilation systems.


- Kind of sensor: Hot wire
- External
- Memory: No
- Interface: USB
- Measurement range: 0.1 ... 25.0 m/s, 0.2 ...55.8 mph
- Resolution: 0.01 m/s, 0.1 mph

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-423-ICA
The PCE-423 is a high resolution air flow meter to measure air velocity and temperature in varied situations. The air flow meter belongs in the basic toolkit for professionals working with ventilation systems, as well as being useful in institutional research and development.


- Measurement range:m/s: 0.1 ... 25.0 m/s, 0.2 ... 55.8 mph
- Measures air velocity and temperature
- Suitable for low velocity air flow
- multiple measurement units available
- Large LCD display
- Data-Hold function
- Incl. ISO calibration certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-A420

Without a doubt, the main advantage of this handheld cup vane Air Flow Meter is that it doesn't need to be held exactly in the direction of the wind. Air Flow Meter with impellers typically have to be held exactly in the direction of the air flow to take accurate measurements. Digital cup vane Air Flow Meter, wind direction will not influence the measurement.


- 0.9 to 35.0 m/s
- 2.5 to 126.0 km/h
- 1.4 to 68.0 knots
- 1.6 to 78.2 miles/h 

 

Manufacturer: PCE Instruments
Test Instruments manufacturer

ISO-Certified Test Instruments Manufacturer

Custom-Made Test Instruments

PCE Instruments offers a wide range of stock products. However, despite an extensive selection of stock product offerings, sometimes a custom product is required to satisfy the specific requirements of a new, groundbreaking or special application.

Are you looking for custom test instruments?
Look no further than PCE Instruments. The DIN EN ISO 9001-certified PCE Product and Development Company GmbH produces customized test instruments tailored to meet the unique needs of a diverse customer base. By capitalizing on the expert knowledge and extensive experience of PCE’s industry-leading Tailored Test Instrumentsengineers and technicians to create custom-built test instruments, customers obtain measuring devices designed specifically for the task at hand.

Throughout the design, development and production process, PCE's engineers and technicians work hand-in-hand with each customer to ensure the final test instrument exceeds expectations. Specifications are clearly defined from the start of the project. Sensors, microprocessors and other electronic components are sourced from high-quality suppliers. Software is written to best support the customer's systems, processes and procedures. Qualified calibration laboratories are tasked with verifying the measurement accuracy of the custom test instrument, and rigorous testing is conducted to make certain that the device will function properly under the anticipated operating conditions.

If you are interested in pursuing the creation of a custom test instrument designed to accommodate an unusual or highly specialized measuring task, please contact the friendly and knowledgable staff at info@industrial-needs.com or +44 (0) 2380 987 035 for PCE Instruments UK, or at info@pce-americas.com or +1 (561) 320-9162 for PCE Americas Inc.