Wire Tracer PCE-CL 20
£ 262.00
Price excl. VAT &. delivery
2 year Warranty

The PCE-CL 20 is a wire tracer or cable locator used to detect live and voltage-free electrical wires. This wire tracer also can be used to locate metallic and non-metallic gas or water pipes, identify short circuits, and follow lines inside walls or under flooring.


- Output signal: 125 kHz
- Compatible with one- or two-pole circuits
- Automatic, manual and UAC measuring modes 

 

Wire Tracer PCE-LT 12
£ 53.00
Price excl. VAT &. delivery
2 year Warranty
No-Shopping
The wire tracer is a versatile measuring instrument. In addition to the standard voltage and current measurements, the wire tracer also has a network analysis. With this network analysis, the wire tracer can be used to check, for example, LAN connections for their correct wiring and function.

Measurement function:
- AC voltage
- DC voltage
- AC
- DC
- Resistance
- Diode measurement
- Continuity test
Test stand LTS-20
£ 529.00
Price excl. VAT &. delivery
2 year Warranty
The force measuring test stand is used in various combinations with our force measuring devices. Manual force measuring test stand for tensile and compressive force measurement. Suitable for many devices from PCE force measurement technology with an internally built-in force measuring cell.

- Force range: max. 1000 N / 100 kg / 220 lbs
- Travel: max. 345 mm / 13.5"
- Spindle pitch: 2 mm / 0.07"
- Minimal maintenance
- the mounting plate ADP-UNI must be ordered at the same time!
Wire Tracer PCE-180 CBN
£ 114.00
Price excl. VAT &. delivery
2 year Warranty
No-Shopping

PCE-180 CBN is a handheld, portable, battery-powered wire tracer or cable locator that consists of an amplifier probe and acoustic signal or tone generator. This locating device is designed to detect wires or cables hidden behind walls or insulation.


- Uses an acoustic signal to detect wires and cables, including network and coaxial cables
- Features a 3-position toggle switch (and 3-color LED) for line polarity, continuity and voltage testing
- Comes with red and black test leads with alligator clips
- Includes 2-year warranty against manufacturer defects

Wire Tracer PCE-191 CB
£ 89.00
Price excl. VAT &. delivery
2 year Warranty

PCE-191 CB is a handheld, portable wire tracer, cable detector or cable fault meter used for locating wires and cables hidden behind walls and insulation.


- Power range: 220 to 240 V AC
- Frequency range: 50 / 60 Hz
- Acoustic alarm 

 

Colorimeter PCE-CSM 20
£ 4,695.00
Price excl. VAT &. delivery
2 year Warranty
Wireless
PCE-CSM 20 is a handheld colorimeter used for high-quality color measurement. Featuring a single 8 mm aperture and including SCI and SCE specular modes for industrial color measuring applications, the colorimeter offers a long battery life, a 4-color lamp and an easy-to-use portable design. The colorimeter covers the full spectrum from 400 to 700 nm in 10 nm increments. Camera/illumination locating for small samples.

- Measuring geometry: 8° / d
- Includes Yellowness, Whiteness, Opacity, Staining and other color indexes
- USB cable and software for data transfer
- 2,000 reference standard memory, 20,000 sample memory
- Light source: D65, A, C, D50
- Color ranges: CIE L*a*b, XYZ, Yxy, LCh, CIE LUV, Hunter L*A*B 
Spectrophotometer PCE-CSM 20
£ 4,695.00
Price excl. VAT &. delivery
2 year Warranty
Wireless
PCE-CSM 20 is a handheld spectrophotometer used for high-quality color measurement. Featuring a single 8 mm aperture and including SCI and SCE specular modes for industrial color measuring applications, the PCE-CSM 20 offers a long battery life, a 4-color lamp with long life and an easy-to-use portable design. The PCE-CSM 20 covers the full spectrum from 400 to 700 nm in 10 nm increments. Camera/illumination locating for small samples.

- Measuring geometry: 8° / d
- Includes Yellowness, Whiteness, Opacity, Staining and other color indexes
- USB cable and software for data transfer
- 2000 reference standard memory, 20,000 sample memory
- Light source: D65, A, C, D50
- Color ranges: CIE L*a*b, XYZ, Yxy, LCh, CIE LUV, Hunter L*A*B 
Defectoscope PCE-FD 20
£ 4,093.00
Price excl. VAT &. delivery
2 year Warranty

PCE-FD 20 is a portable ultrasonic defectoscope with a large LCD screen that displays A-scan maps of ultrasonic signals as well as B-scan cross sections. Ideal for use in mechanical engineering, aerospace and metallurgical applications, this high-frequency ultrasound-based defectoscope uses a contact transducer (two different probes included; 45° and 90°) to measure material thickness and identify flaws and defects such as discontinuity in welds.


- Operating frequency range: 1 ... 10 MHz
- Measured time interval range: 6 ... 1000 microseconds (µs)
- Sound velocity: 1000 ... 9999 m/s 

 

Color Meter PCE-CSM 20
£ 4,695.00
Price excl. VAT &. delivery
2 year Warranty
Wireless
PCE-CSM 20 is a handheld color meter used for high-quality color measurement. Featuring a single 8 mm aperture and including SCI and SCE specular modes for industrial color measuring applications, the color meter offers a long battery life, 4-color lamp and an easy-to-use portable design. The color meter covers the full spectrum from 400 to 700 nm in 10 nm increments. Camera/illumination locating for small samples.

- Measuring geometry: 8° / d
- Includes Yellowness, Whiteness, Opacity, Staining and other color indexes
- USB cable for data transfer
- 2000 reference standard memory, 20,000 sample memory
- Light source: D65, A, C, D50
- Color ranges: CIE Lab, XYZ, Yxy, LCh, CIE LUV, Hunter LAB
IoT Meter PCE-CSM 20
£ 4,695.00
Price excl. VAT &. delivery
2 year Warranty
Wireless
PCE-CSM 20 is a handheld IoT meter used for high-quality color measurement. Featuring a single 8 mm aperture and including SCI and SCE specular modes for industrial color measuring applications, the IoT meter offers a long battery life, a 4-color lamp and an easy-to-use portable design. The IoT meter covers the full spectrum from 400 to 700 nm in 10 nm increments. Camera/illumination locating for small samples.

- Measuring geometry: 8° / d
- Includes Yellowness, Whiteness, Opacity, Staining and other color indexes
- USB cable and software for data transfer
- 2,000 reference standard memory, 20,000 sample memory
- Light source: D65, A, C, D50
- Color ranges: CIE L*a*b, XYZ, Yxy, LCh, CIE LUV, Hunter L*A*B 
Material Tester for Metals PCE-COM 20
£ 5,229.00
Price excl. VAT &. delivery
2 year Warranty

PCE-COM 20 is a portable handheld non-destructive material tester for non-ferrous metals. This non-destructive testing (NDT) device uses eddy current to determine the electrical conductivity of non-ferrous metals such as aluminum and copper. Includes 3 standards for testing.

 

- Operating frequency: 60 kHz
- Sine wave probe: Ø 14 mm / ≈ 0.55 in 
- Memory: Up to 500 groups of measurements
- Lift-off and temperature compensation
- Automatic calibration

Conductivity Tester for Metals PCE-COM 20
£ 5,229.00
Price excl. VAT &. delivery
2 year Warranty

PCE-COM 20 is a portable handheld non-destructive conductivity tester for non-ferrous metals. This non-destructive testing (NDT) device uses eddy current to determine the electrical conductivity of non-ferrous metals such as aluminum and copper. Includes 3 standards for testing.

 

- Operating frequency: 60 kHz
- Sine wave probe: Ø 14 mm / ≈ 0.55 in
- Memory: Up to 500 groups of measurements
- Lift-off and temperature compensation
- Automatic calibration

NDT Test Instruments PCE-COM 20
£ 5,229.00
Price excl. VAT &. delivery
2 year Warranty

PCE-COM 20 is a portable handheld non-destructive conductivity tester for non-ferrous metals. This non-destructive testing (NDT) device uses eddy current to determine the electrical conductivity of non-ferrous metals such as aluminum and copper. Includes 3 standards for testing.

 

- Operating frequency: 60 kHz
- Sine wave probe: Ø 14 mm / ≈ 0.55 in
- Memory: Up to 500 groups of measurements
- Lift-off and temperature compensation
- Automatic calibration

Gas Detector PCE-LDC 20
£ 4,445.00
Price excl. VAT &. delivery
2 year Warranty
The gas detector for gas pressure systems is an effective solution for detecting and evaluating leaks in compressed air and other non-explosive gas pressure systems. The measured leaks can be recorded and analysed within the software, the escape of compressed air causes high electricity costs as compressors run more than they should.

Units: bar, psi, MPa, l/min, m³/h, cfm
Leak detection in compressed air, refrigerant
  and gas systems

- Leakage assessment
- Various attachments
- Wireless headphones
- Frequency: 38 . .. 42 kHz
- Measurement rate: 1 Hz
- Memory capacity: 1 GB
Leak Detector PCE-LDC 20
£ 4,445.00
Price excl. VAT &. delivery
2 year Warranty
The leak detector for gas pressure systems is an effective solution for detecting and evaluating leaks in compressed air and other non-explosive gas pressure systems. The measured leaks can be recorded and analysed within the software, the escape of compressed air causes high electricity costs as compressors run more than they should.

Units: bar, psi, MPa, l/min, m³/h, cfm
Leak detection in compressed air, refrigerant
  and gas systems

- Leakage assessment
- Various attachments
- Wireless headphones
- Frequency: 38 . .. 42 kHz
- Measurement rate: 1 Hz
- Memory capacity: 1 GB
NDT Tester PCE-LDC 20
£ 4,445.00
Price excl. VAT &. delivery
2 year Warranty
The NDT tester for gas pressure systems is an effective solution for detecting and evaluating leaks in compressed air and other non-explosive gas pressure systems. The measured leaks can be recorded and analysed within the software, the escape of compressed air causes high electricity costs as compressors run more than they should.

Units: bar, psi, MPa, l/min, m³/h, cfm
Leak detection in compressed air, refrigerant
  and gas systems

- Leakage assessment
- Various attachments
- Wireless headphones
- Frequency: 38 . .. 42 kHz
- Measurement rate: 1 Hz
- Memory capacity: 1 GB
Flaw Detector PCE-FD 20
£ 4,093.00
Price excl. VAT &. delivery
2 year Warranty

PCE-FD 20 is a portable ultrasonic flaw detector with a large LCD screen that displays A-scan maps of ultrasonic signals as well as B-scan cross sections. Ideal for use in mechanical engineering, aerospace and metallurgical applications, this high-frequency ultrasound-based flaw detector uses a contact transducer (two different probes included; 45° and 90°) to measure material thickness and identify flaws and defects such as discontinuity in welds.


- Operating frequency range: 1 ... 10 MHz
- Measured time interval range: 6 ... 1000 microseconds (µs)
- Sound velocity: 1000 ... 9999 m/s 

 

Thickness Meter PCE-FD 20
£ 4,093.00
Price excl. VAT &. delivery
2 year Warranty

PCE-FD 20 is a portable ultrasonic tester or ultrasonic thickness gauge with a large LCD screen that displays A-scan maps of ultrasonic signals as well as B-scan cross sections. Ideal for use in mechanical engineering, aerospace and metallurgical applications, this high-frequency ultrasound-based thickness meter uses a contact transducer (two different probes included; 45° and 90°) to measure material thickness and identify flaws and defects such as discontinuity in welds.


- Operating frequency range: 1 ... 10 MHz
- Measured time interval range: 6 ... 1000 microseconds (µs)
- Sound velocity: 1000 ... 9999 m/s