Wall Thickness Meter PCE-TG 300-ICA incl. ISO cal. certificate

Order no.: PCE-TG 300-ICA
ISO Calibration
£ 1,153.00
£ 1,383.60
PCE-TG 300-ICA
price ex. (VAT / delivery)
Delivery time: 10 - 14 days
Wall Thickness Meter incl. ISO Calibration Certificate
Large measuring range / Up to 600 mm / Pulse-echo or echo-echo mode /  For all homogeneous materials / Print function via Bluetooth / USB connection

This is a wall thickness meter with special sensors for various applications. In general, the wall thicknesses of all homogeneous materials can be measured with this wall thickness meter. For damping or scattering materials such as plastic or cast a special sensor is available. An angled 90° sensor also enables measurements at hard-to-reach measuring points. The speed of sound can be set freely on the wall thickness meter and thus adapted to a wide variety of materials.

The measured values ​​are displayed directly on the easy-to-read TFT color display. Due to the internal memory, which can be read out via the optionally available software, different measuring points can be clearly stored. The non-destructive ultrasound measuring method enables the measurement even on end products. Thanks to the Echo-Echo working mode, even coated workpieces can be measured.

- Large measuring range
- Various sensors available
- Battery operation
- Error and voids detection
- Internal measurement data memory
- Print via Bluetooth
- incl. ISO Calibration Certificate
Measuring range PE: pulse-echo mode 0.65 ... 600 mm (steel)
  EE: echo-echo mode 2.50 ... 60 mm
Accuracy ± 0.04 mm H [mm] (<10 mm); ± 0.4% H [mm] (> 10 mm)
  H refers to the material thickness of the workpiece
Resolution 0.1 mm / 0.01 mm / 0.001 mm (adjustable)
   
Measurable materials Metals
  Plastics
  Ceramics
  Epoxy resin
  Glass
  And all homogeneous materials
   
Working modes Pulse echo mode (fault and blower detection)
  Echo-Echo mode (hiding layer thicknesses, eg paints)
   
Calibration Sound velocity calibration
  Zeroing
  Two-point calibration
   
View mode Normal mode, Scan mode, Difference mode
Units mm / inch
Data transfer Print via Bluetooth / USB 2.0
Storage Non-volatile memory with 100 data groups with 100 data sets each
Operating time Continuous operation 100 h
  Automatic stand-by mode (adjustable)
  Automatic switch-off mode (adjustable)
   
Power supply 4 x AA battery 1.5V
Display 320 x 240 pixels TFT LCD color display with brightness adjustment
Operating conditions 0 ... 50°C / 32 ... 122°F, ≤ 80% RH not condensing
Storage conditions -20 ... 70°C / -4 ... 158°F, ≤ 80% rh non-condensing
Dimensions 185 x 97 x 40 mm / 7.3 x 3.8 x 1.6 in
Weight 375 g / < 1 lb
   
Specification of the available sensors for wall thickness gauge PCE-TG 300
   
NO2  
Frequency 2.5 MHz
Diameter 14 mm
Measuring range 3 ... 40 mm (steel)
  3 ... 300 mm (steel)
Minimum diameter of pipes  Not suitable for curved materials
Description For damping / scattering materials (plastics, cast iron)
   
NO5  
Frequency 5 MHz
Diameter 10 mm
Measuring range 1 ... 600 mm (steel)
Minimum diameter of pipes  20 x 3 mm
Description                                   Normal measurement
   
NO5 / 90°  
Frequency 5 MHz
Diameter 10
Measuring range 1 ... 600 mm (steel)
Minimum diameter of pipes 20 x 3 mm
Description Normal measurement
   
NO7  
Frequency 7 MHz
Diameter 6 mm
Measuring range 0.65 ... 200 mm (steel)
Minimum diameter of pipes 15 x 2 mm
Description Or thin-walled or heavily curved pipes
   
HT5  
Frequency 5 MHz
Diameter 12 mm
Measuring range 1 ... 600 mm (steel)
Minimum diameter of pipes 30 mm
Description For high temperatures (max 300°C / 572°F)
   
P5EE  
Frequency 5 MHz
Diameter 10 mm
Measuring range PE: 2 ... 600 mm, EE: 2.5 ... 100 mm
Minimum diameter of pipes 20 x 3 mm
Description Normal measurement and EE test
   

1 x Wall Thickness Meter PCE-TG 300-ICA
1 x Sensor P5EE
1 x 100 ml coupling gel
1 x Transport case
4 x AA batteries
1 x User manual
1 x ISO Calibration Certificate