Order no.: PCE-VS12

Vibration Meter Sensor Switch PCE-VS12


£ 411.00
£ 493.20
PCE-VS12
price ex. (VAT / delivery)
Machine vibration

Description

PCE-VS12 Vibration Meter Sensor Switch
Setup via USB and PC / Includes software for detailed vibration analysis

PCE-VS12 is a vibration meter, analyzer or sensor condition monitoring switch used to measure RMS value, peak value and frequency domain (FFT) of vibration velocity or acceleration piezoelectrically. This IP67-rated vibration monitoring switch features an external USB port, 8-pin female connector 711 and programmable high pass and low pass filters.


Highlights

- Ideal for machine condition monitoring and quality control applications
- Measures RMS and peak value of vibration velocity or acceleration
- Monitoring of frequency domain (FFT)
- Piezoelectric accelerometer
- IP67 ingress protection rating against water and dust
- Features an external USB port and 8-pin female connector 711
- Programmable high pass and low pass filters
- Emergency shut-off
- Setup via USB and PC
- Includes software for detailed vibration analysis


Specification

Measuring range 0.1 ... 1000 m/s² acceleration
Frequency dependent velocity
2 ... 1000 or 20 ... 10,000 Hz / 360 lines frequency domain
Monitoring values Peak value of vibration acceleration or vibration velocity
RMS value of vibration acceleration or vibration velocity
Frequency domain (FFT)
High pass filter 0.1 / 2 / 5 / 10 / 20 / 50 / 100 / 200 / 500 / 1000 Hz acceleration
2 / 5 / 10 / 20 / 50 Hz velocity
Low pass filter 0.1 / 0.2 / 0.5 / 1 / 2 / 5 / 10 kHz acceleration
1 kHz velocity
FFT limits
Relay output
10 freely selectable frequency intervals with limit amplitudes
PhotoMOS relay
SPST
Max. 60 V / 0.5 A (AC/DC)
Open/close programmable
Connection via 8-pin female connector 711
Teach-in function
Warning / alarm
Button for measuring the switching threshold
No
Interfaces USB 2.0 full speed for parameterization and measurement
CDC mode / virtual COM port
8-pin female connector 711
External USB port
Power supply voltage
Yes
5 ... 30 V DC
5 V DC USB
< 100 mA screw terminals
Ingress protection IP67 rating
Operating temp. range -40 ... +80 °C / -40 ... +176 °F
Approx. weight 125 g / 0.28 lb
Approx. dimensions 50 mm / 1.97" Ø
36 mm / 1.42" height
Mounting M8 thread pin
8 mm / ≈ 0.32" length
25 mm / ≈ 0.99" Ø coupling surface

Delivery Scope

1 x PCE-VS12 vibration meter sensor switch
1 x USB cable
1 x PC-compatible software
1 x user manual