Vibration Meter PCE-VM 400B
£ 4,445.00
Price excl. VAT &. delivery
2 year Warranty
The vibration meter is a technically advanced instrument for the precise measurement and evaluation of vibrations in industrial applications. It enables the simultaneous measurement of vibrations on shafts and bearings across four independent channels. The vibration meter has various measurement functions, including acceleration, velocity, displacement, and rotational speed, to cover a wide range of applications.

- Wide frequency range: 1 ... 25000 Hz
- Acceleration: 0.001 ... 200 m/s²
- Velocity: 0.001 ... 200 mm/s
- Piezoelectric acceleration sensors
- Balancing up to 8 correction planes
- USB interface
- 4 GB data storage
- 4 channels for measurement
- Evaluation according to ISO 10816
Vibration Meter PCE-VM 40C
£ 3,560.00
Price excl. VAT &. delivery
2 year Warranty

The PCE-VM 40C Vibration Meter with SMS alert functionality was designed for vibration and shock metering on buildings, bridges, towers, and other artificial structures. The Vibration Meter measures vibrations in accordance to DIN 4150-3, BS 7385 and SN 640312A standards. With its internal memory for up to 100,000 readings, the PCE-VM 40C Vibration Meter can determine the effects of construction sites, traffic, or industrial processing on buildings over a long period of time. Features a micro SD card, GSM modem (optional), warning and alarm leds, relay output, SMS alerts (optional), and an internal battery. 


- Designed for building / construction vibration monitoring
- Triaxial acceleration meter
- In accordance with BS 7385 standard
- SMS alarm notifications (optional)
- FFT analysis, XYZ and vector sum display
- Quad band GSM
- SMS alarm notifications

 

Vibration Meter PCE-VM 22
£ 2,390.00
Price excl. VAT &. delivery
2 year Warranty
The vibration meter has a measuring range of 0 ... 200 m/s² for acceleration. In addition to acceleration, the vibration meter can also perform speed, displacement, frequency and an ISO 18016-3 measurement.

- Measuring range 0 ... 200 m/s²
- Frequency: 1 ... 10,000 Hz
- Displacement
- Tachometer    
- Infrared temperature measurement   
- 4 GB data memory
- FFT analysis and wave view of the vibration
Human Vibration Meter with Hand-Arm and Whole-Body Sensors PCE-VM 31-HAWB
£ 4,538.00
Price excl. VAT &. delivery
2 year Warranty

The PCE-VM 31-HAWB Human Vibration Meter is designed for measuring human vibration at the workplace. The Vibration Meter can calculate hand-arm vibration measurements according to ISO 5349 and whole-body vibration measurements according to ISO 2631. Each sensor consists of a triaxial Vibration Meter that captures acceleration, velocity, and displacement measurements.


- Measuring of human vibration at the workplace
- Velocity, acceleration, displacement
- 3 channel FFT
- TEDS support

 

Vibration Meter Calibrator PCE-VC20
£ 2,337.00
Price excl. VAT &. delivery
2 year Warranty

PCE-VC20 is a vibration meter calibrator used to calibrate vibration sensors, analyzers and testers. Suitable for calibrating equipment weighing up to 600 g (1.32 lb), this rechargeable-battery-powered vibration calibrator generates mechanical vibrations with a quartz-stabilized vibration frequency of 159.15 Hz (radian frequency 1000/s).


Load-independent vibration magnitude with an RMS of:
- 10 m/s² vibration acceleration
- 10 mm/s vibration velocity
- 10 µm vibration displacement

Vibration Recorder PCE-VM 400B
£ 4,445.00
Price excl. VAT &. delivery
2 year Warranty
The vibration recorder is a technically advanced instrument for the precise measurement and evaluation of vibrations in industrial applications. It enables the simultaneous measurement of vibrations on shafts and bearings across four independent channels. The vibration recorder has various measurement functions, including acceleration, velocity, displacement, and rotational speed, to cover a wide range of applications.

4 channels for measurement
- Measurement on shafts, bearings, motors, generators
- Piezoelectric acceleration sensors
- Wide frequency range: 1 ... 25000 Hz
Acceleration: 0.001 ... 200 m/s²
Velocity: 0.001 ... 200 mm/s
- Balancing up to 8 correction planes
- USB interface
- 4 GB data storage
- Evaluation according to ISO 10816
Vibration Meter PCE-VM 20
£ 1,682.00
Price excl. VAT &. delivery
2 year Warranty
The vibration meter PCE-VM 20 is a compact device for direct evaluation of the vibration behavior of a machine. The vibration meter can measure and display various vibration parameters, such as vibration acceleration, vibration velocity or vibration displacement.

- Vibration acceleration: 0 ... 200 m/s², RMS and peak-peak
- Vibration speed: 0 ... 200 mm/s, RMS
- Vibration distance: 0 ... 2000 μm, peak-peak
- Real-time FFT analysis
- Direct evaluation according to DIN ISO 10816
Vibration Analyzer PCE-VM 400B
£ 4,445.00
Price excl. VAT &. delivery
2 year Warranty
The vibration analyzer is a technologically advanced instrument for the precise measurement and evaluation of vibrations in industrial applications. It enables the simultaneous measurement of vibrations on shafts and bearings across four independent channels. The vibration analyzer has various measurement functions, including acceleration, velocity, displacement, and rotational speed, to cover a wide range of applications.

- 4 channels for measurement
- Measurement on shafts, bearings, motors, generators
- Piezoelectric acceleration sensors
- Wide frequency range: 1 ... 25000 Hz
- Acceleration: 0.001 ... 200 m/s²
- Velocity: 0.001 ... 200 mm/s
- Balancing up to 8 correction planes
- USB interface
- 4 GB data storage
- Evaluation according to ISO 10816
Vibration Meter PCE-VM 5000-KIT
£ 2,536.00
Price excl. VAT &. delivery
2 year Warranty

The 4-channel PCE-VM 5000 Vibration Meter performs vibration measurements on up to 4 places at the same time. The vibration velocity, acceleration, and displacement in a frequency range of 10 Hz to 1 kHz can be measured. The cables of the vibration sensors are 1.2 m / 3.9 ft long, so the vibration measuring device is able to record vibrations at different points of the component to be tested.


- Frequency range: 10 Hz ... 1 kHz
- Measurement of acceleration, velocity and displacement
- Connection of up to 4 sensors simultaneously
- Data storage on SD card
- Including 2 additional sensors for vibration

Human Vibration Meter with Whole-Body Sensor PCE-VM 31-WB
£ 3,288.00
Price excl. VAT &. delivery
2 year Warranty

The PCE-VM 31-WB Human Vibration Meter or Analyzer is designed for measuring human vibration at the workplace. The Vibration Meter can calculate hand-arm vibration measurements according to ISO 5349 and whole-body vibration measurements according to ISO 2631.


- Measuring of human vibration at the workplace
- Velocity, acceleration, displacement
- 3 channel FFT
- TEDS support
- Includes whole-body sensor only - hand-arm sensor sold separately (see   
  accessories)

 

Vibration Meter PCE-VM 5000
£ 1,971.00
Price excl. VAT &. delivery
2 year Warranty

The 4-channel PCE-VM 5000 Vibration Meter performs vibration measurements on up to 4 places at the same time. The vibration velocity, acceleration, and displacement in a frequency range of 10 Hz to 1 kHz can be measured. The cables of the vibration sensors are 1.2 m / 3.9 ft long, so the vibration measuring device is able to record vibrations at different points of the component to be tested.


- 4 channels / inputs
- Frequency range: 10 Hz ... 1 kHz
- Measurement of acceleration, velocity and displacement
- Connection of up to 4 sensors simultaneously, 2 included
- Data storage on SD card
- Sampling rate: min. 1 sec.

Vibration Meter PCE-VM 22-ICA incl. ISO Calibration Certificate
£ 2,534.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The vibration meter has a measuring range of 0 ... 200 m/s² for acceleration. In addition to acceleration, the vibration meter can also perform speed, displacement, frequency and an ISO 18016-3 measurement.

- Acceleration
- Velocity
- Displacement
- Frequency
- Tachometer    
- Infrared temperature measurement   
- 4 GB data memory
- FFT analysis and wave view of the vibration
- incl. ISO Calibration Certificate
Human Vibration Meter with Hand-Arm Sensor PCE-VM 31-HA
£ 3,101.00
Price excl. VAT &. delivery
2 year Warranty

The PCE-VM 31-HA Human Vibration Meter is designed for measuring human vibration at the workplace. The Vibration Meter can calculate hand-arm vibration measurements according to ISO 5349 and whole-body vibration measurements according to ISO 2631.


- Measuring of human vibration at the workplace
- Velocity, acceleration, displacement
- 3 channel FFT
- TEDS support
- Includes hand-arm sensor only - whole-body sensor sold separately (see
  accessories)

 

Condition Monitoring Vibration Meter PCE-VM 40C
£ 3,560.00
Price excl. VAT &. delivery
2 year Warranty

The PCE-VM 40C Condition monitoring vibration meter with SMS alert functionality was designed for vibration and shock metering on buildings, bridges, towers, and other artificial structures. The condition monitoring vibration meter measures vibrations in accordance to DIN 4150-3, BS 7385 and SN 640312A standards. With its internal memory for up to 100,000 readings, the PCE-VM 40C Condition monitoring vibration meter can determine the effects of construction sites, traffic, or industrial processing on buildings over a long period of time.


- Triaxial acceleration meter
- In accordance with BS 7385 standard
- Quad band GSM (optional)
- SMS alarm notifications 
 (optional)
- Memory size of 100,000 values (SD card)
- Integrated NiMH battery
- FFT analysis, XYZ and vector sum display

 

Vibration Analyzer Calibrator PCE-VC21
£ 3,560.00
Price excl. VAT &. delivery
2 year Warranty

PCE-VC21 is a vibration analyzer calibrator used to calibrate vibration sensors, meters, analyzers and testers. Suitable for calibrating equipment weighing up to 600 g (1.32 lb), this rechargeable-battery-powered vibration calibrator generates mechanical vibrations with adjustable quartz-stabilized vibration frequencies between 15.92 and 1280 Hz and adjustable vibration amplitudes between 1 m/s² and 20 m/s².


- Load-independent vibration magnitude
- 7 adjustable vibration frequencies
- 5 adjustable vibration amplitudes

 

Vibration Recorder PCE-VM 40C
£ 3,560.00
Price excl. VAT &. delivery
2 year Warranty

The PCE-VM 40C Vibration Recorder with SMS alert functionality was designed for vibration and shock metering on buildings, bridges, towers, and other artificial structures. The Vibration Recorder measures vibrations in accordance to DIN 4150-3, BS 7385 and SN 640312A standards. With its internal memory for up to 100,000 readings, the PCE-VM 40C Vibration Recorder can determine the effects of construction sites, traffic, or industrial processing on buildings over a long period of time. Features a micro SD card, GSM modem (optional), warning and alarm leds, relay output, SMS alerts (optional), and an internal battery. 


- Designed for building / construction vibration monitoring
- Triaxial acceleration meter
- In accordance with BS 7385 standard
- SMS alarm notifications (optional)
- FFT analysis, XYZ and vector sum display
- Quad band GSM
- SMS alarm notifications

 

Vibration Analyzer PCE-VM 40C
£ 3,560.00
Price excl. VAT &. delivery
2 year Warranty

The PCE-VM 40C Vibration analyzer with SMS alert functionality was designed for vibration and shock metering on buildings, bridges, towers, and other artificial structures. The Vibration analyzer measures vibrations in accordance to DIN 4150-3, BS 7385 and SN 640312A standards. With its internal memory for up to 100,000 readings, the PCE-VM 40C Vibration analyzer can determine the effects of construction sites, traffic, or industrial processing on buildings over a long period of time. Features a micro SD card, GSM modem, warning and alarm leds, relay output, SMS alerts, and an internal battery. 


- Triaxial acceleration meter
- In accordance with BS 7385 standard
- Quad band GSM (optional)
- SMS alarm notifications

- Memory size of 100,000 values (SD card)
- Integrated NiMH battery
- FFT analysis, XYZ and vector sum display

 

Vibration Meter PCE-VM 5000-KIT-ICA incl. ISO Calibration Certificate
£ 2,936.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration

The 4-channel PCE-VM 5000 Vibration Meter performs vibration measurements on up to 4 places at the same time. The vibration velocity, acceleration, and displacement in a frequency range of 10 Hz to 1 kHz can be measured. The cables of the vibration sensors are 1.2 m / 3.9 ft long, so the vibration measuring device is able to record vibrations at different points of the component to be tested.


- Frequency range: 10 Hz ... 1 kHz
- Measurement of acceleration, velocity and displacement
- Connection of up to 4 sensors simultaneously
- Data storage on SD card
- Including 2 additional sensors for vibration
- Including ISO Calibration Certificate