Torque Meter PCE-CTT 10
£ 1,768.00
Price excl. VAT &. delivery
2 year Warranty
The torque meter for drinking bottles was developed to determine the torque of screw caps on drinking bottles and similar containers in a stationary manner. The software can then be used to depict a graphical and tabular course of the measurement sequence from the torque meter for drinking bottles.

- Measuring range: 10 Nm / 7.4 ft-lb
- Resolution: 0.005 Nm / 0.0037 ft-lb
- Accuracy: 0.3% of the measuring range
- USB interface for software connection
- Integrated printer
Torque Meter PCE-FB 10TS
£ 1,629.00
Price excl. VAT &. delivery
2 year Warranty

The torque meter serves for detection of the loosening torque as well as for tightening of screws. Simultaneously the torque meter can be used as a monitoring instrument. The torque test instrument provides a keyed chuck with two steady handles.


- Measuring range: 10 Nm (1 kgf-m) / 7.38 ft-lb
- Max. 0,5 % accuracy from the measuring range
- Measuring rate freely adjustable up to 1000 Hz
- 24 Bit Processor
- Keyed chuck up to Ø 13 mm

Torque Meter PCE-CTT 5
£ 1,749.00
Price excl. VAT &. delivery
2 year Warranty
The torque meter for drinking bottles was developed to determine the torque of screw caps on drinking bottles and similar containers in a stationary manner. The software can then be used to depict a graphical and tabular course of the measurement sequence from the torque meter for drinking bottles.

- Measuring range: 5 Nm / 3.69 ft-lb
- Resolution: 0.002 Nm / 0.0015 ft-lb
- Accuracy: 0.3% of the measuring range
- USB interface for software connection
- Integrated printer
Torque Meter PCE-FB 500TW
£ 1,759.00
Price excl. VAT &. delivery
2 year Warranty

The torque wrench tester of the PCE-TWM series can test torque wrenches up to 500 Nm / 368.78 ft-lb, depending on the sensor. Due to the precise evaluation electronics, the torque wrench tester has a measurement accuracy of 0.5 % of the measurement range. The torque wrench is fixed by means of a 1/4' female square. The torque wrench tester consists of an evaluation unit and an external torque transducer with a cable which makes the measurement setup convenient.


- Measurement range: 500 Nm (50 kgfm) / 368.78 ft-lb
- Resolution: 1 Nm / 0.738 ft-lb
- Accuracy: ±0.5 % of measurement range
- Units of measurement: Nm, Ncm, kgfm, lbfin, gfm
- Calibration: possible with external F2 weights
- Max. overload: 50 % of measurement range

 

Torque Meter PCE-CTT 2
£ 1,727.00
Price excl. VAT &. delivery
2 year Warranty
The torque meter for drinking bottles was developed to determine the torque of screw caps on drinking bottles and similar containers in a stationary manner. The software can then be used to depict a graphical and tabular course of the measurement sequence from the torque meter for drinking bottles.

- Measuring range: 2 Nm / 1.5 ft-lb
- Resolution: 0.001 Nm / 0.00074 ft-lb
- Accuracy: 0.3% of the measuring range
- USB interface for software connection
- Integrated printer
Torque Meter PCE-FB 5TS
£ 1,629.00
Price excl. VAT &. delivery
2 year Warranty

The torque meter serves for detection of the loosening torque as well as for tightening of screws. Simultaneously the torque meter can be used as a monitoring instrument. The torque test instrument provides a keyed chuck with two steady handles.


- Measuring range: 5 Nm (0,5 kgf-m) / 3.69 ft-lb
- Max. 0,5 % accuracy from the measuring range
- Measuring rate freely adjustable up to 1000 Hz
- 24 Bit Processor
- Keyed chuck up to Ø 13 mm

 

Torque Meter PCE-DFG N 10TW
£ 1,468.00
Price excl. VAT &. delivery
2 year Warranty
The torque meter PCE-DFG N 10TW consists of a hand-held measuring device and an external torque transducer. The torque wrench tester is delivered adjusted so that the control measurements can be started immediately.

- Measurement range: 10 Nm / 7.38 ft-lb
- Resolution: 0.005 Nm / 0.00369 ft-lb
- Measurement uncertainty: ± 0.5% of the measurement range
- Memory for 100 measurement series with 8,000 measurement points each
- USB interface including PC software
- Graphic display
Torque Meter PCE-FB 2TS
£ 1,629.00
Price excl. VAT &. delivery
2 year Warranty

The torque meter serves for detection of the loosening torque as well as for tightening of screws. Simultaneously the torque meter can be used as a monitoring instrument. The torque test instrument provides a keyed chuck with two steady handles.


- Measuring range: 2 Nm (0,2 kgf-m) / 1.475 ft-lb
- Max. 0,5 % accuracy from the measuring range
- Measuring rate freely adjustable up to 1000 Hz
- 24 Bit Processor
- Keyed chuck up to Ø 13 mm

 

Torque Meter PCE-DFG N 50TW
£ 1,468.00
Price excl. VAT &. delivery
2 year Warranty
The torque meter consists of a hand-held measuring device and an external torque transducer. The torque meter is delivered adjusted so that the control measurements can be started immediately.

- Measurement range: 50 Nm / 36.88 ft-lb
- Resolution: 0.01 Nm 0.00738 ft-lb
- Measurement uncertainty: ± 0.5% of the measurement range
- Memory for 100 measurement series with 8,000 measurement points each
- USB interface including PC software
- Graphic display
Torque Meter PCE-DFG N 5TW
£ 1,468.00
Price excl. VAT &. delivery
2 year Warranty
The torque meter PCE-DFG N 5TW consists of a hand-held measuring device and an external torque transducer. The torque wrench tester is delivered adjusted so that the control measurements can be started immediately.

- Measurement range: 5 Nm / 3.69 ft-lb
- Resolution: 0.001 Nm / 0.000738 ft-lb
- Measurement uncertainty: ± 0.5% of the measurement range
- Memory for 100 measurement series with 8,000 measurement points each
- USB interface including PC software
- Graphic display
Torque Meter PCE-DFG N 100TW
£ 1,405.00
Price excl. VAT &. delivery
2 year Warranty
The torque meter PCE-DFG N 100TW consists of a hand-held measuring device and an external torque transducer. The torque wrench tester is delivered adjusted so that the control measurements can be started immediately.

- Measurement range: 100 Nm / 73.76 ft-lb
- Resolution: 0.1 Nm / 0.0738 ft-lb
- Measurement uncertainty: ± 0.5% of the measurement range
- Memory for 100 measurement series with 8,000 measurement points each
- USB interface including PC software
- Graphic display
Torque Meter PCE-DFG N 10TW-ICA incl. ISO Calibration Certificate
£ 1,646.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The torque meter consists of a hand-held measuring device and an external torque transducer. The torque wrench tester is delivered adjusted so that the control measurements can be started immediately.

- Measurement range: 10 Nm / 7.38 ft-lb
- Resolution: 0.005 Nm / 0.00369 ft-lb
- Measurement uncertainty: ± 0.5% of the measurement range
- Memory for 100 measurement series with 8,000 measurement points each
- USB interface including PC software
- Graphic display
- incl. ISO Calibration Certificate for one direction (left or right)
Torque Meter PCE-DFG N 5TW-ICA incl. ISO Calibration Certificate
£ 1,646.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The torque meter consists of a hand-held measuring device and an external torque transducer. The torque wrench tester is delivered adjusted so that the control measurements can be started immediately.

- Measurement range: 5 Nm / 3.69 ft-lb
- Resolution: 0.001 Nm / 0.000738 ft-lb
- Measurement uncertainty: ± 0.5% of the measurement range
- Memory for 100 measurement series with 8,000 measurement points each
- USB interface including PC software
- Graphic display
- incl. ISO Calibration Certificate for one direction (left or right)
Torque Meter PCE-DFG N 50TW-ICA incl. ISO Calibration Certificate
£ 1,646.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The torque meter consists of a hand-held measuring device and an external torque transducer. The torque meter is delivered adjusted so that the control measurements can be started immediately.

- Measurement range: 50 Nm / 36.88 ft-lb
- Resolution: 0.01 Nm / 0.00738 ft-lb
- Measurement uncertainty: ± 0.5% of the measurement range
- Memory for 100 measurement series with 8,000 measurement points each
- USB interface including PC software
- Graphic display
- incl. ISO Calibration Certificate for one direction (left or right)
Torque Meter PCE-DFG N 100TW-ICA incl. ISO Calibration Certificate
£ 1,584.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The torque meter consists of a hand-held measuring device and an external torque transducer. The torque wrench tester is delivered adjusted so that the control measurements can be started immediately.

- Measurement range: 100 Nm / 73.76 ft-lb
- Resolution: 0.1 Nm / 0.0738 ft-lb
- Measurement uncertainty: ± 0.5% of the measurement range
- Memory for 100 measurement series with 8,000 measurement points each
- USB interface including PC software
- Graphic display
- incl. ISO Calibration Certificate for one direction (left or right)
Color Meter PCE-CSM 10
£ 5,606.00
Price excl. VAT &. delivery
2 year Warranty

The color meter PCE-CSM 10 was developed for quality control, offers a high accuracy and comes with a 3.5" touch screen display. You can choose between different color spaces like CIE L*A*B, XYZ, Yxy, LCh, LUV, LCH, LAB &WI &YI, Color Fastness, and Staining Fastness. 400 to 700 nm photodiode array for 10nm wavelength increments with Reflectance Curve graph. 


- CIE L*A*B/LCh, CIE XYZ/Yxy, CIE LUV/LCH, LAB &WI &YI, Color Fastness, and Color Staining 
- Measuring geometry 10° or 2°/d
- Black and white calibration
- Opacity, 18 light source options, metameric index, CIE 1976/1994/2000
- 1000 Standards, 15,000 sample memory

Torque Meter PCE-TM 80
£ 711.00
Price excl. VAT &. delivery
2 year Warranty

The Torque Meter PCE-TM 80 with external sensor to measure the static or startup torque moment in screws, components, switches, transmission shafts, etc. The Torque Meter PCE-TM 80 is an affordable solution to easily calibrate and test static torque measurements.


- Range 0 ... 147 Ncm / 0 ... 13.01 lbfin
- Selection of  3 units (Ncm, kgfcm, lbfin)
- Digital output RS-232
- External torque sensor
- Measures startup or static torque, not dynamic torque 

 

Climate Meter PCE-DPM 10
£ 3,452.00
Price excl. VAT &. delivery
2 year Warranty
The climate meter from PCE Instruments enables precise determination of the dew point in pressurised systems. Thanks to its robust design, the device can be used for industrial applications up to 15 bar.

- Dew point measuring range from -100 ... +50 °C
- Pressure range up to 15 bar differential pressure
- Data logger for up to 100 million measured values
- Adjustable alarm limits
- Touch LC display