Torque Meter HTGS-2N

Order no.: HTGS-2N

£ 1,149.00
£ 1,378.80
price ex. (VAT / delivery)
2 Nm
Yes (integrated)
Yes (USB, RS-232)
Nm, cNm, kgfm, kgfcm,,
Delivery time: 1-2 working days
The torque tester is a handheld device for battery and mains operation with readings memory and interface for measuring the torque of fasteners, components, switches, drive shafts, etc. The torque tester has an output for pass / fail tests. A special feature of the torque tester are the two modes. On the one hand there is the display of instantaneous force and, on the other hand, the peak value for detecting power peaks. Another special feature is the display of the opening and closing force (right- or left-hand torque). In the torque tester, you can choose between the units: Nm, cNm, kgfm, or cNm kgfcm, The measured value memory of the torque tester captures 1000 measurements. These can be read on thedisplay, or printedvia data transfer to the PC. The torque tester has a high internal measurement frequency and has three interfaces: RS 232, analog and Mitutoyo Digimatic. The color LED display of the torque tester lights up when the programmable thresholds for pass / fail tests are achieved: Falling below threshold (-NG), Good (OK) and exceeded (+ NG). The easily readable display of the torque tester represents the measured value, the mode, the direction of rotation, the unit and if the setpoint is exceeded.

Please Note: The torque meter is supplied without chuck! Please see accessories for the chuck.

- Torque tester for fast, accurate measurements
- Display the opening and closing force (right or left-handed torque)
- 2 modes: Realtime and Peak
- Programmable limits with indication on the display
- Output for pass / fail tests
- Measured value memory for 1000 measurements
- Interface (RS232, USB, analog) and Mitutoyo Digimatic
- Easy to read OLED display, even in low light

Technical Data
- Accuracy: ± 0.5% full scale ± 1 digit
- Measuring frequency: 2000 times / s
- Units: Nm, cNm, kgfm, kgfcm,,
- Display: OLED 4 digits, updated 10 times / s
- Overload Protection: 200% full scale, warning from 110%full scale
- Memory: Flash memory of max. 1000 measurements available: Peak, opening force, closing force
- Limits: Min (-NG), Max (+ NG) adjustable, with output signal
- Output: USB, RS232 C (8, 1, N, 19200) analog ± 2 V DC Mitutoyo Digimatic
  Open Collector 3x (+ NG, OK, -NG), overload signal
- Temperature range: 0 - 40 °C
- Humidity: max. 80% rel. humidity
- Power supply: Rechargeable NiMH batteries (approx 8 hours continuous operation.)
and / or power supply 230V AC
- Dimensions (approx): Display: 187 x 75 x 34 mm (LxWxH)
- Sensor: 180 x 38 mm (LxØ)
- Weight: (approx): Display unit: 440 g / sensor: 530 g complete with case 2000g
TypeMeasuring rangeResolutionChuck Ø in mm
HTGS-2N0 - 2.000 Nm (200 cNm)0.001 Nm (0.1 cNm)0.5 - 6.5

Delivery Contents

Torque meter with 1 load cell and without measuring insert,
AC adapter,
mini USB connection cable,
manufacturer test certificate,
CD-ROM with drivers,
simple software for data acquisition "ZT-logger",
operating instructions in English

Please Note: The torque meter is supplied without chuck! Please see accessories for the chuck.