Thickness Gauge

Order no.: PCE-CT 80
The paint layer thickness gauge PCE-CT 80 is a measuring device for the nondestructive measurement of coatings (paints, lacquers, plastics ...) on steel / iron and non-ferrous metals. Includes FN1.5 probe in kit for 0 ... 1500 μm or 0 ... 59 mils measurements. Optional sensors and software available under accessories tab.

- Measuring range of meter is Fe: 0 ... 5000 μm (0 ... 196.9 mils) / NFe: 0 ... 3000 μm (0 ... 118.1 mils)
- For many substrate materials such as Iron, Steel, Aluminum, Copper, Brass and Stainless Steel.
- Practical V-groove on the measuring sensor heads
- Wear-resistant, spring-mounted measuring head for precise measurement results
Manufacturer: PCE Instruments
£ 556.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-TG 120

The Ultrasonic Thickness Gauge PCE-TG120 is a very easy-to-use wall thickness gauge for all materials. This ultrasonic thickness gauge works to accurately measure the material thickness / wall thickness with ultrasound.

- Measurement range: 1 mm ... 30 mm / 0.04 in ... 1.18 in (displays in mm only)
- Resolution: 0.1 mm / 3.94 mil
- Accuracy: ± 0.1 mm 
- Integrated test block

Manufacturer: PCE Instruments
£ 575.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-CT 80-ICA
The paint layer thickness gauge PCE-CT 80-ICA is a measuring device for the nondestructive measurement of coatings (paints, lacquers, plastics ...) on steel / iron and non-ferrous metals. Includes FN1.5 probe in kit for 0 ... 1500 μm or 0 ... 59 mils measurements. Optional sensors and software available under accessories tab.

- Measuring range of meter is Fe: 0 ... 5000 μm (0 ... 196.9 mils) / NFe: 0 ... 3000 μm (0 ... 118.1 mils)
- For many substrate materials such as Iron, Steel, Aluminum, Copper, Brass and Stainless Steel.
- Practical V-groove on the measuring sensor heads
- Wear-resistant, spring-mounted measuring head for precise measurement results 
- Includes ISO laboratory calibration certificate
Manufacturer: PCE Instruments
£ 663.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-TG 300
The PCE-TG 300 is a thickness gauge with special sensors for various applications. In general, the wall thicknesses of all homogeneous materials can be measured with the thickness gauge. For damping or scattering materials such as plastic or cast a special sensor is available.

Measuring range:
PE: pulse-echo mode 0.65 ... 600 mm (steel)
EE: echo-echo mode 2.50 ... 60 mm
Accuracy:
± 0.04 mm H [mm] (<10 mm); ± 0.4% H [mm] (> 10 mm)
H refers to the material thickness of the workpiece
Resolution: 0.1 mm / 0.01 mm / 0.001 mm (adjustable)
Manufacturer: PCE Instruments
£ 1,046.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-CT 100N
The thickness gauge works according to the magnetic inductive (ISO 2178) and the eddy current method (ISO 2360). These methods supported by the thickness gauge are used for the non-destructive testing of materials.

- Measuring range: 0 ... 1250 µm
- Accuracy: ± (1% + 1 µm)
- Resolution: 0.1 µm (<99.9 µm), 1 µm (> 100 µm)
- Measurement data storage for up to 500 data
- Data transfer via wifi and USB
- Two different probes for NFe and Fe (included)
Manufacturer: PCE Instruments
£ 1,050.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-CT 100N-ICA
The coating thickness gauge works according to the magnetic inductive (ISO 2178) and the eddy current method (ISO 2360). These methods supported by the coating thickness gauge are used for the non-destructive testing of materials.

- Measuring range: 0 ... 1250 µm
- Accuracy: ± (1% + 1 µm)
- Resolution: 0.1 µm (<99.9 µm), 1 µm (> 100 µm)
- Measurement data storage for up to 500 data
- Data transfer via Wifi and USB
- Two different probes for NFe and Fe (included)
- incl. ISO Calibration Certificate
Manufacturer: PCE Instruments
£ 1,165.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-CT 90
The thickness gauge is a versatile measuring device. This is made possible by the various optional sensors on the thickness gauge. Thanks to the surface temperature sensor, the thickness gauge can be used to determine the surface temperature of an object within a measuring range of -50 ... 125°C / -58 ... 257°F. 

- Measuring range standard sensor : 0 ... 60 mm (Fe and non-Fe)
- Automatic sensor detection
- Zero point and one-point calibration
- Various sensors (optional selectable)
Manufacturer: PCE Instruments
£ 1,201.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-CT 90-ICA
The thickness gauge is a versatile measuring device. This is made possible by the various optional sensors on the thickness gauge. Thanks to the surface temperature sensor, the thickness gauge can be used to determine the surface temperature of an object within a measuring range of -50 ... 125°C / -58 ... 257°F. 

- Measuring range standard sensor : 0 ... 60 mm (Fe and non-Fe)
- Automatic sensor detection
- Zero point and one-point calibration
- Various sensors (optional selectable)
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
£ 1,307.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-FD 20

PCE-FD 20 is a portable ultrasonic tester or ultrasonic thickness gauge with a large LCD screen that displays A-scan maps of ultrasonic signals as well as B-scan cross sections. Ideal for use in mechanical engineering, aerospace and metallurgical applications, this high-frequency ultrasound-based thickness meter uses a contact transducer (two different probes included; 45° and 90°) to measure material thickness and identify flaws and defects such as discontinuity in welds.


- Operating frequency range: 1 ... 10 MHz
- Measured time interval range: 6 ... 1000 microseconds (µs)
- Sound velocity: 1000 ... 9999 m/s 

 

Manufacturer: PCE Instruments
£ 3,204.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-USC 20

PCE-USC 20 is a portable or benchtop ultrasonic tester or ultrasonic thickness gauge with a 5.7" TFT color LCD screen. This ultrasound-based thickness meter uses one or two contact transducers (four different probes included; 90 °, 70 °, 60 °, 45 °) to measure material or wall thickness, detect flaws or defects in welds, and monitor the effects of corrosion on pipes and tanks.


- Measurement range: 0.5 ... 9999 mm (steel; longitudinal wave)
- Operating frequency range: 0.5 ... 20 MHz
- Sound velocity: 1000 ... 15000 m/s (continuously adjustable)
- AVG and DAC evaluation methods, display and probes delay, damping and
  reinforcing functions, export and reporting functions 

 

Manufacturer: PCE Instruments
£ 3,730.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-USC 30

PCE-USC 30 is a coating thickness gauge designed for the non-destructive testing (NDT) and non-destructive evaluation (NDE) of electrically conductive materials. This portable, handheld thickness meter detects surface defects and measures layer thicknesses using an eddy current. The PCE-USC 30 material tester also measures metal conductivity in accordance with the International Annealed Copper Standard (IACS).


- Frequency range: 0.01 ... 16000 kHz
- Non-destructive testing of surfaces
- Makes surface defects and defects near the surface visible
- Conductivity measurement of metals according to IACS
- Power supply via internal battery

 

Manufacturer: PCE Instruments
£ 4,445.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-USC 30

PCE-USC 30 is a coating thickness gauge designed for the non-destructive testing (NDT) and non-destructive evaluation (NDE) of electrically conductive materials. This portable, handheld thickness meter detects surface defects and measures layer thicknesses using an eddy current. The PCE-USC 30 material tester also measures metal conductivity in accordance with the International Annealed Copper Standard (IACS).


- Frequency range: 0.01 ... 16000 kHz
- Non-destructive testing of surfaces
- Makes surface defects and defects near the surface visible
- Conductivity measurement of metals according to IACS
- Power supply via internal battery

 

Manufacturer: PCE Instruments
£ 4,445.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-USC 30
The thickness gauge is used in non-destructive material testing (NDT). Surface defects and imperfections close to the surface can be made visible with the thickness gauge. Eddy current testing is an electrical method for testing electrically conductive materials. In the eddy current test, a probe charged with alternating voltage is placed on an electrically conductive test piece.

- Frequency range: 0.01 ... 16000 kHz
- Non-destructive testing of surfaces
- Makes surface defects and defects near the surface visible
- Conductivity measurement of metals according to IACS
- Power supply via internal battery
Manufacturer: PCE Instruments
£ 4,445.00

Price excl. VAT &. delivery
2 year Warranty