Anemometer PCE-WSAC 50W 24-ICA Incl. ISO Calibration Certificate
£ 1,175.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration

The anemometer PCE-WSAC 50W 24-ICA is useful for measuring the wind speed to help determine the preferred site for a wind turbine installation. The device also monitors the wind load on existing wind farms, as well as on cranes for safey purposes. Due to the integrated 4 ... 20-mA analogue output of the anemometer, the measured data can also be transferred to other controllers for evaluation.


- Measuring range up to 180 km / h
- Input: pulse, analogue (4 ... 20-mA) or radio transmission
- 4 ... 20-mA analog output
- Supply voltage: 24V DC
- Ambient temperature -20 ... 70°C / -4 ... 158°F
- Units adjustable: km / h, mph, m / s 
- Incl. ISO calibration certificate
Anemometer PCE-WSAC 50W 230-ICA incl ISO calibration certificate
£ 1,175.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration

The anemometer PCE-WSAC 50W 230-ICA is useful for measuring the wind speed to help determine the preferred site for a wind turbine installation. The device also monitors the wind load on existing wind farms, as well as on cranes for safety purposes. Due to the integrated 4 ... 20-mA analogue output of the anemometer, the measured data can also be transferred to other controllers for evaluation.


- Measuring range up to 180 km / h
- Input: Pulse, analogue (4 ... 20-mA) or radio transmission
- 4 ... 20-mA analogue output
- Supply voltage: 110 ... 230V AC, 50/60 Hz
- Ambient temperature -20 .. . 70°C / -4 ... 158°F
- Units adjustable: km / h, mph, m / s
- Incl. ISO calibration certificate
Thermo-Anemometer PCE-HWA 30-ICA incl. ISO Calibration Certificate
£ 372.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The thermo-anemometer measures the flow velocity according to the hot wire principle. This guarantees a particularly compact design. In addition to the flow rate, the thermo-anemometer can measure the volume flow and the ambient temperature.

- Measuring range: 0.3 ... 30.0 m/s / 0.98 ... 98.4 ft/s
- Probe length: 270 … 990 mm / 10.63 … 38.98 / 29.1"
- Probe diameter: Ø0.8 ... 1.2 mm / 0.031 x 0.047"
- Data memory for 960 measured values
- Wind speed
- Volume flow
- Temperature measurement
- incl. ISO Calibration Certificate (wind speed function only)
Thermo-Anemometer PCE-HWA 20BT-ICA incl. ISO Calibration Certificate
£ 329.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The thermo-anemometer has a measuring range of 0 ... 30 m/s. In addition to the air flow, the thermo-anemometer can also measure the ambient temperature between -20 ... 60 °C / -4 ... 140 °F and the ambient humidity between 0 ... 100% RH.

- Wind speed measuring range: 0.00 ... 30.00 m/s / 98 ft/s / 67 mph
- Temperature measuring range: -20 ... 60 °C / -4 ... 140 °F
- Humidity measuring range: 0 ... 100% RH
- Telescope diameter 12 mm / 0.47"
- 390 mm / 15.4" telescopic pole
- Bluetooth 4.0 interface
- incl. ISO Calibration Certificate (wind speed function only)
Thermo Hygrometer PCE-EMD 10-ICA Incl. ISO Calibration Certificate
£ 889.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The thermo hygrometer can be connected to up to four external temperature and humidity modules. The temperature measuring range for the thermometer sensors is 32.0 ... 122.0 °F and the humidity measuring range is 0.0 ... 99.9% RH.

- Temperature measuring range: 32.0… 122.0 °F
- Humidity measuring range: 0.0 ... 99.9% RH
- Connection of up to four external sensors
- Analog 4 ... 20-mA input signal
- Wall mounting
- Incl. ISO calibration certificate
Thermo Hygrometer PCE-EMD 5-ICA incl. ISO Calibration Certificate
£ 889.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The thermo hygrometer can be connected to up to four external temperature and humidity modules. The temperature measuring range for the thermometer sensors is 0.0 … 50.0 °C and the humidity measuring range is 0.0… 99.9% RH.

- Temperature measuring range: 0.0 … 50.0 °C
- Humidity measuring range: 0.0 ... 99.9% RH
- Connection of up to four external sensors
- Analog 4 ... 20 mA input signal
- Wall mounting
- incl. ISO Calibration Certificate
IoT Meter PCE-432-EKIT-ICA incl ISO Calibration Certificate
£ 4,664.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration

The Class 1 IoT meter can be used, e.g., for sound measurement of street noise, aircraft and train noise, event noise, noise coming from construction sites, ports, factories involving heavy machinery, airport/bus stations, stadiums, horse/motor racing tracks etc. The weather conditions do not matter, and hail, snow, rain and similar are no problem for this system for outdoor noise monitoring. The IoT meter is equipped with a GPS receiver which allows the user to assign the measured values to an exact position.

 

- Accuracy class 1
- GPS function
- A, B, C & Z frequency rating
- Fast, Slow, Pulse and Peak time weighting
- Statistics function
- 1/1 octave band included
- 1/3 octave band optional
- Incl. Outdoor Alarm Noise Meter Kit PCE-4xx-EKIT
- Outdoor measurement of sound and noise
Incl. ISO calibration certificate

Thermo Hygrometer PCE-AQD 20-ICA Incl. ISO Calibration Certificate
£ 761.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The thermo hygrometer is an ideal measuring device for monitoring the air quality at workplaces. The thermo hygrometer is ideal for continuous logging of air temperature, humidity, CO2, PM2.5 and air pressure.

Measuring function
- PM2.5
- Humidity
- Temperature
- CO2
- Air pressure
- Memory: SD card max. 32 GB
- Ideal for workplace monitoring
- Alarm function
- Incl. ISO calibration certificate
Conductivity Tester for Metals PCE-COM 20-ICA incl. ISO Calibration Certificate
£ 5,367.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration

PCE-COM 20-ICA is a portable handheld non-destructive conductivity tester for non-ferrous metals. This non-destructive testing (NDT) device uses eddy current to determine the electrical conductivity of non-ferrous metals such as aluminum and copper. Includes 3 standards for testing.

 

- Operating frequency: 60 kHz
- Sine wave probe: Ø 14 mm / ≈ 0.55 in 
- Memory: Up to 500 groups of measurements
- Lift-off and temperature compensation
- Automatic calibration
- incl. ISO Calibration Certificate

NDT Test Instruments PCE-COM 20-ICA incl. ISO Calibration Certificate
£ 5,367.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration

PCE-COM 20-ICA is a portable handheld non-destructive conductivity tester for non-ferrous metals. This non-destructive testing (NDT) device uses eddy current to determine the electrical conductivity of non-ferrous metals such as aluminum and copper. Includes 3 standards for testing.

 

- Operating frequency: 60 kHz
- Sine wave probe: Ø 14 mm / ≈ 0.55 in 
- Memory: Up to 500 groups of measurements
- Lift-off and temperature compensation
- Automatic calibration
- incl. ISO Calibration Certificate

Material Tester for Metals PCE-COM 20-ICA incl. ISO Calibration Certificate
£ 5,367.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration

PCE-COM 20-ICA is a portable handheld non-destructive material tester for non-ferrous metals. This non-destructive testing (NDT) device uses eddy current to determine the electrical conductivity of non-ferrous metals such as aluminum and copper. Includes 3 standards for testing.

 

- Operating frequency: 60 kHz
- Sine wave probe: Ø 14 mm / ≈ 0.55 in 
- Memory: Up to 500 groups of measurements
- Lift-off and temperature compensation
- Automatic calibration
- incl. ISO Calibration Certificate

Hanging Scale PCE-CSI 30-ICA incl. ISO Calibration Certificate
£ 3,693.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The hanging scale for in-house weighing of up to 30 t. The hanging scale have a large shackle on the top and a rotatable hook with a safety catch on the underside. The hanging scale are operated using the infrared remote control supplied.

- Weighing range: 30,000 kg / 66,138 lb
- Resolution: 20 kg / 44 lb
- Minimum load: 100 kg / 220 lb
- Control via remote control
- Stainless steel
- Rotatable hook
- incl. ISO Calibration Certificate
Suspended Scale PCE-CSI 30-ICA incl. ISO Calibration Certificate
£ 3,693.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The suspended scale for in-house weighing of up to 30 t. The suspended scale has a large shackle on the top and a rotatable hook with a safety catch on the underside. The suspended scale is operated using the infrared remote control supplied.

- Weighing range: 30,000 kg / 66,138 lb
- Resolution: 20 kg / 44 lb
- Minimum load: 100 kg / 220 lb
- Control via remote control
- Stainless steel
- Rotatable hook
- incl. ISO Calibration Certificate
Weighing Hook PCE-CSI 30-ICA incl. ISO Calibration Certificate
£ 3,693.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The weighing hook for in-house weighing of up to 30 t. The weighing hook has a large shackle on the top and a rotatable hook with a safety catch on the underside. The weighing hook is operated using the infrared remote control supplied.

- Weighing range: 30,000 kg / 66,138 lb
- Resolution: 20 kg / 44 lb
- Minimum load: 100 kg / 220 lb
- Control via remote control
- Stainless steel
- Rotatable hook
- incl. ISO Calibration Certificate
Force Gage PCE-CSI 30-ICA incl. ISO Calibration Certificate
£ 3,693.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The force gage for in-house weighing of up to 30 t. The force gage has a large shackle on the top and a rotatable hook with a safety catch on the underside. The force gage is operated using the infrared remote control supplied.

- Weighing range: 30,000 kg / 66,138 lb
- Resolution: 20 kg / 44 lb
- Minimum load: 100 kg / 220 lb
- Control via remote control
- Stainless steel
- Rotatable hook
- incl. ISO Calibration Certificate
Force Gauge PCE-CSI 30-ICA incl. ISO Calibration Certificate
£ 3,693.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The force gauge for in-house weighing of up to 30 t. The force gauge has a large shackle on the top and a rotatable hook with a safety catch on the underside. The force gauge is operated using the infrared remote control supplied.

- Weighing range: 30,000 kg / 66,138 lb
- Resolution: 20 kg / 44 lb
- Minimum load: 100 kg / 220 lb
- Control via remote control
- Stainless steel
- Rotatable hook
- incl. ISO Calibration Certificate
Crane Scale PCE-CSI 30-ICA incl. ISO Calibration Certificate
£ 3,693.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The crane scale for in-house weighing of up to 30 t. The crane scale has a large shackle on the top and a rotatable hook with a safety catch on the underside. The crane scale is operated using the infrared remote control supplied.

- Weighing range: 30,000 kg / 66,138 lb
- Resolution: 20 kg / 44 lb
- Minimum load: 100 kg / 220 lb
- Control via remote control
- Stainless steel
- Rotatable hook
- incl. ISO Calibration Certificate
Environmental Meter PCE-428-EKIT-ICA incl. ISO Calibration Certificate
£ 3,693.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration

The environmental meter PCE-428-EKIT-ICA, from the field of environmental measurement technology, is an optimal sound level meter for measurements at workplaces, construction sites, in traffic, airports, etc. The environmental meter is equipped with an octave band frequency filter. Optionally, the environmental meter can be upgraded with a 1/3 octave band filter. The additional kit for outdoor sound measurement makes it possible to measure outdoor noise with an environmental meter over a long period of time, even in the rain.

 

- Accuracy class 2 
- A, B, C & Z frequency rating
- Fast, Slow, Pulse and Peak time weighting
- Statistics function
- 1/1 octave band included
- 1/3 octave band optional
- incl. outdoor noise level meter kit PCE-4xx-EKIT
- Outdoor measurement of sound and noise
- incl. ISO calibration certificate