Durometer PCE-HT-450
£ 1,320.00
Price excl. VAT &. delivery
2 year Warranty
The durometer is an analog measuring device to determine concrete strength. The measuring method of the concrete durometer is based on the Schmidt principle. With this measuring method, a kinetic impact energy hits the concrete from the durometer. The resulting rebound enables the durometer to determine the strength of the concrete.

- Nominal kinetic energy: 4.5 J
- For high-strength concrete
- Simple and quick operation
- For determining concrete hardness
- Schmidt principle
Material Tester PCE-HT-450
£ 1,320.00
Price excl. VAT &. delivery
2 year Warranty
The material tester is an analog measuring device to determine concrete strength. The measuring method of the material tester is based on the Schmidt principle. With this measuring method, a kinetic impact energy hits the concrete from the material tester. The resulting rebound enables the material tester to determine the strength of the concrete.

- Nominal kinetic energy: 4.5 J
- For high-strength concrete
- Simple and quick operation
- For determining concrete hardness
- Schmidt principle
Roll Hardness Tester PCE-HT-450
£ 1,320.00
Price excl. VAT &. delivery
2 year Warranty
The roll hardness tester is an analog measuring device to determine concrete strength. The measuring method of the roll hardness tester is based on the Schmidt principle. With this measuring method, a kinetic impact energy hits the concrete from the roll hardness tester. The resulting rebound enables the roll hardness tester to determine the strength of the concrete.

- Nominal kinetic energy: 4.5 J
- For high-strength concrete
- Simple and quick operation
- For determining concrete hardness
- Schmidt principle
Surface Testing - Concrete Hammer PCE-HT-450
£ 1,320.00
Price excl. VAT &. delivery
2 year Warranty
The surface testing - concrete hammer is an analog measuring device to determine concrete strength. The measuring method of the surface testing - concrete hammer is based on the Schmidt principle. With this measuring method, a kinetic impact energy hits the concrete from the surface testing - concrete hammer. The resulting rebound enables the surface testing - concrete hammer to determine the strength of the concrete.

- Nominal kinetic energy: 4.5 J
- For high-strength concrete
- Simple and quick operation
- For determining concrete hardness
- Schmidt principle
Concrete Hardness Tester PCE-HT-450
£ 1,320.00
Price excl. VAT &. delivery
2 year Warranty
The concrete hardness tester is an analog measuring device to determine concrete strength. The measuring method of the concrete hardness tester is based on the Schmidt principle. With this measuring method, a kinetic impact energy hits the concrete from the concrete hardness tester. The resulting rebound enables the concrete hardness tester to determine the strength of the concrete.

- Nominal kinetic energy: 4.5 J
- For high-strength concrete
- Simple and quick operation
- For determining concrete hardness
- Schmidt principle
NDT Tester - Hardness Tester PCE-HT-450
£ 1,320.00
Price excl. VAT &. delivery
2 year Warranty
The NDT tester - hardness tester is an analog measuring device to determine concrete strength. The measuring method of the NDT tester - hardness tester is based on the Schmidt principle. With this measuring method, a kinetic impact energy hits the concrete from the NDT tester - hardness tester. The resulting rebound enables the NDT tester - hardness tester to determine the strength of the concrete.

- Nominal kinetic energy: 4.5 J
- For high-strength concrete
- Simple and quick operation
- For determining concrete hardness
- Schmidt principle
Concrete Rebound Test Hammer PCE-HT-450
£ 1,320.00
Price excl. VAT &. delivery
2 year Warranty
The concrete rebound test hammer is an analog measuring device to determine concrete strength. The measuring method of the concrete rebound test hammer is based on the Schmidt principle. With this measuring method, a kinetic impact energy hits the concrete from the concrete rebound test hammer. The resulting rebound enables the concrete rebound test hammer to determine the strength of the concrete.

- Nominal kinetic energy: 4.5 J
- For high-strength concrete
- Simple and quick operation
- For determining concrete hardness
- Schmidt principle
Temperature Meter PCE-G1
£ 974.00
Price excl. VAT &. delivery
2 year Warranty
The temperature meter is intended for stationary measurement of relative humidity and temperature and direct display on a large display. This temperature meter consists of an LED display (100 mm high) and is protected according to IP 54.

- Temperature measuring range: 0 ... +60 °C (Celsius only)
- Humidity measuring range: 10 ... 95 % RH
- Up to 50 m (164 ft) reading distance
- External sensor (wired)
HVAC Meter PCE-VE 1500-22190
£ 20,670.00
Price excl. VAT &. delivery
2 year Warranty
Wireless
With this HVAC meter, weld seams, wear and tear and damage can be assessed quickly and easily in order to make quick diagnoses. The sheathing of the endoscope cable from the HVAC meter consists of braided tungsten.

- Diameter: Ø2.2mm / 0.08"
- Cable length: 1m / 3.2 ft
- Camera direction: 90°
- Resolution: 160,000 pixels
- Focusing range: 5 ... 50 mm / 0.19 ... 1.96"
- 7" touch screen for easy operation
- replaceable battery with status display
- Storage of recording on SD card
- Motor with endoscope cable can be changed quickly
- HDMI connection for direct image transmission
Temperature Meter PCE-G1A
£ 978.00
Price excl. VAT &. delivery
2 year Warranty
The temperature meter is a measuring device for stationary measurement of relative humidity and temperature. This temperature meter consists of an LED seven-segment display with a digit height of 100 mm, which enables you to read it very well even at a distance of up to 50 m.

- Temperature measuring range: 0 ... +60 °C (Celsius only)
- Humidity measuring range: 10 ... 95 % RH
- Up to 50 m (164 ft) reading distance
- External sensor (wired)
- Voltage supply: 230 V AC
- with analogue output 4 ... 20 mA
HVAC Meter PCE-VE 1500-38209
£ 20,670.00
Price excl. VAT &. delivery
2 year Warranty
Wireless
With this HVAC meter, weld seams, wear and tear and damage can be assessed quickly and easily in order to make quick diagnoses. The sheathing of the endoscope cable from the HVAC meter consists of braided tungsten.

- Endoscope cable length: approx. 2 m / 6.5 ft
- Diameter: 3.8mm / 0.15"
- Camera resolution 160,000 pixels each
- Viewing angle front camera 120°, side camera 90°
- Focusing distance 5 … 50 mm / 0.19 ... 1.96" each
- Camera head length: 42 mm / 1.6"
- Bending radius at 90° 35 mm / 1.3"
- Live images from both cameras side by side
- 7" touch screen for easy operation
- Replaceable battery with status display
- Storage of recording on SD card
- Motor with endoscope cable can be changed quickly
- HDMI connection for direct image transmission
Temperature Meter PCE-TC 34N
£ 974.00
Price excl. VAT &. delivery
2 year Warranty
The temperature meter has a resolution of 320 x 240 pixels. With a measuring range of -20 ... 300 °C, the temperature meter already covers a large temperature range. The emission value of the temperature meter can be set to carry out measurements on different surfaces.

- Measuring range: -20 ... 300 °C / -4 ... 572 °F
- Infrared and real image resolution: 320 x 240 pixels
- Picture in picture function
- USB-C interface
- Refresh rate: 9Hz
- Storage for about 20,000 images
HVAC Meter PCE-VE 1500-28200
£ 17,795.00
Price excl. VAT &. delivery
2 year Warranty
Wireless
With this HVAC meter, weld seams, wear and tear and damage can be assessed quickly and easily in order to make quick diagnoses. The sheathing of the endoscope cable from the HVAC meter consists of braided tungsten.

- Diameter: Ø2.8mm / 0.11"
- Cable length: 2m / 6.5 ft
- Camera direction: 0°
- Resolution: 160,000 pixels
- Focusing range: 5 ... 50 mm / 0.19 ... 1.96"
- 7" touch screen for easy operation
- Replaceable battery with status display
- Storage of recording on SD card
- Motor with endoscope cable can be changed quickly
- HDMI connection for direct image transmission
HVAC Meter PCE-VE 1500-60500
£ 17,377.00
Price excl. VAT &. delivery
2 year Warranty
Wireless
With this HVAC meter, weld seams, wear and tear and damage can be assessed quickly and easily in order to make quick diagnoses. The sheathing of the endoscope cable from the HVAC meter consists of braided tungsten.

- Diameter: Ø6mm / 0.23"
- Cable length: 5m / 16.4 ft
- Camera direction: 0°
- Resolution: 1MP
- Focusing range: 5 ... 50 mm / 0.19 ... 1.96"
- 7" touch screen for easy operation
- replaceable battery with status display
- Storage of recording on SD card
- Motor with endoscope cable can be changed quickly
- HDMI connection for direct image transmission
Multifunction Temperature Meter PCE-WM1
£ 908.00
Price excl. VAT &. delivery
2 year Warranty

PCE-WM1 is a multi-function temperature meter used to determine relative humidity (% RH), absolute humidity (g/m³), air temperature, dew-point temperature and surface temperature (°C). This Metric-only measuring instrument comes complete with an external sensor probe for taking the surface temperature of different materials.


- Temperature range: -20 ... 80°C 
- Relative humidity range: 10 ... 95% RH
- Absolute humidity range: 0.5 ... 74.4 g/m³

 

Temperature Meter PCE-TC 32N
£ 860.00
Price excl. VAT &. delivery
2 year Warranty
The temperature meter has a measuring range of -20 ... +550 °C. This means that the temperature meter already covers a wide temperature range of measuring tasks. With a frame rate of 25 Hz, problems can be quickly localised with the temperature gauge.

- Measuring range: -20 ... +550 °C
- Picture-in-picture function 
- Frame rate: 25 Hz
- Internal/external memory
Wi-Fi 802.11
- Display resolution: 240 x 320 pixels
- Battery
HVAC Meter PCE-VE 1500-38200
£ 17,039.00
Price excl. VAT &. delivery
2 year Warranty
Wireless
With this HVAC meter, weld seams, wear and tear and damage can be assessed quickly and easily in order to make quick diagnoses. The sheathing of the endoscope cable from the HVAC meter, consists of braided tungsten.

- Endoscope cable length: approx. 2 m / 6.5 ft
- Diameter: 3.8mm / 0.15"
- Front camera with resolution: 1,000,000 pixels
- Front camera viewing angle 120°
- Focus 10 … 100 mm / 0.39 … 3.9"
- Movable camera head 46 mm / 1.8" long
- Bending radius approx. 35 mm / 1.3" at 90°
- 7" touch screen for easy operation
- replaceable battery with status display
- Storage of recording on SD card
- Motor with endoscope cable can be changed quickly
- HDMI connection for direct image transmission
HVAC Meter PCE-PIC 120
£ 12,231.00
Price excl. VAT &. delivery
2 year Warranty
The HVAC meter PCE-PIC 120 is used to inspect channels and pipes. The HVAC meter has a fiber optic push cable of 120 m / 393.7 ft. At the end of the HVAC meter, a motorized camera head is mounted. This camera head is able to be moved 360° horizontally and 180° vertically.

- Camera head diameter: 60 mm / 2.4 in
- Cable length: 120 m / 393.7 ft
- Pipe diameter from & to: 80 ... 1200 mm / 3.1 ... 47.2 in
- Field of view: 20 ... 100 cm
- SD card up to 256 GB
- ø9.5 mm fiber optic cable
- Motorized camera
- With cable trolley