Hotline

Technical advice

 Technical Hotline

Monday - Friday
8.00am - 4.00pm

023 8098 7035

PCE Instruments meters product presentation.

Would you like a product presentation via Skype?
Send us an email:

  1. You are here:
  2. Home
  3. Measuring Instruments
  4. Surface Testing
  5. Surface Testing - Coating Thickness Gauge PCE-USC 30

Surface Testing - Coating Thickness Gauge PCE-USC 30

Order no.: PCE-USC 30
£ 2,625.00
£ 3,150.00
4250348715968
PCE-USC 30
price ex. (VAT / delivery)
Coating Thickness
Delivery time: 1-2 working days
PCE-USC 30 is a coating thickness gauge designed for the non-destructive testing (NDT) and non-destructive evaluation (NDE) of electrically conductive materials. This portable, handheld thickness meter detects surface defects and measures layer thicknesses using an eddy current. The PCE-USC 30 material tester also measures metal conductivity in accordance with the International Annealed Copper Standard (IACS).

The PCE-USC 30 thickness gauge has myriad applications including weld seam testing, crack detection, metallurgical and material sorting tests, quality assurance and control, aviation component testing of turbine blades, and pipeline and container testing in the chemical, oil and gas industries.

- Frequency range: 0.01 ... 16000 kHz
- Visually depicts surface defects on screen
- 4.3" full-color display (TFT)
- Ergonomic design
- Long battery life
Frequency range

0.01 ... 16000 kHz
Probe voltage supply 0, 5, 1, 2, 4, 6 V
Signal phase shift 0 ... 360 °
Sampling frequency 0 ... 10 kHz
Duration of signal superimposition 0 / 0.5 / 1/2/3/4 seconds
Alarm Circular, horizontal line, circle sector, cut off
Display Full-color display (TFT)
Display size 4.3 "(diagonal)
Display resolution 800 x 480 pixels
Amplification adjustment 0 ... 100 dB
Filters Low-pass (1 ... 4000 Hz), high-pass (1 ... 4000 Hz), band, differential, average
Average interval between measurement errors 4000 hours
Power supply 12 V battery
Battery capacity 4500 mAh
Continuous runtime per battery charge Approx. 8 hours
Operating temperature -20 ... +45 ° C
Weight Approx. 0.9 kg
Dimensions 230 x 135 x 98 mm

1 x Surface Testing - Coating Thickness Gauge PCE-USC 30
1 x Eddy current probe
1 x Calibration standard
1 x Software
1 x Probe cable
1 x Conductivity measuring probe
1 x Battery
1 x Battery charger
1 x Carrying case
1 x User manual

Accessories

Order no.: PCE-USC-V1
Calibration block for PCE-USC-V1

Calibration block PCE-USC-V1 for PCE-USC 20, PCE-USC 30, and PCE-FD 20. Distance, beam index, refracted angle, and sensitivity calibration. In accordance with ASTM E164 specifications. Dimensions are 1" thickness.

- Calibration block for training and test

Manufacturer: PCE Instruments
£ 338.00

Price excl. VAT &. delivery
2 year Warranty

Test Instruments manufacturer
Order no.: TT-GEL
Ultrasonic Contact Gel (100 ml)
The contact gel is used in ultrasonic material thickness measurements. The gel ensures good contact between the measuring head and the workpiece. The moderate temperature contact gel can be used at temperatures of -10 to 80°C / -14 to 176°F. 

- Usable up to 80°C / 176°F
- Improves contact between the transducer head and the material to be measured
- Protects material surfaces from the transducer head
- 100 ml size
- See downloads for MSDS
£ 26.00

Price excl. VAT &. delivery
2 year Warranty

Test Instruments manufacturer
Order no.: PCE-USC-V2
Calibration block for PCE-USC-V2

Calibration block PCE-USC-V2 for PCE-USC 20, PCE-USC 30, and PCE-FD 20. Distance, beam index, refracted angle, and sensitivity calibration. Contains a 1.0" radius opposite a 2.0" radius, a 5/64" diameter x 0.750" deep flat-bottom hole. In accordance with ASTM E164 specifications. Dimensions are 1" thickness.

- Calibration block for training and test

Manufacturer: PCE Instruments
£ 222.00

Price excl. VAT &. delivery
2 year Warranty

Test Instruments manufacturer