Stroboscope RT STROBE 7000 LED
£ 2,678.00
Price excl. VAT &. delivery
2 year Warranty

The main advantage of a steady-state stroboscope RT STROBE 7000 LED with intelligent LED-technology results from the absence of a short life xenon-tube. The STROBE 7000 LED is able to flash up to 120,000 flashed per minute at 9000 LUX with its 200 LEDs.


- Frequency range: 0 ... 120000 FPM
- Large area illumination 300 x 500 mm
- Adjustable illuminance:
  as standard, with rotary knob, from 30 - 100%
- High light intensity
- 9000 LUX at 30 cm


Stroboscope RT STROBE 7000 LED
£ 2,678.00
Price excl. VAT &. delivery
2 year Warranty

The main advantage of a steady-state stroboscope RT STROBE 7000 LED with intelligent LED-technology results from the absence of a short life xenon-tube. The STROBE 7000 LED is able to flash up to 120,000 flashed per minute at 9000 LUX with its 200 LEDs.


- Frequency range: 0 ... 120,000 FPM (flashes per minute)
- Large area illumination 300 x 500 mm
- Adjustable illuminance: as standard, with rotary knob, from 30 - 100%
- High light intensity
- 9000 LUX at 30 cm


Stroboscope RT STROBE 5000 LED
£ 1,575.00
Price excl. VAT &. delivery
2 year Warranty

The main advantage of a steady-state stroboscope RT STROBE 5000 LED with intelligent LED-technology results from the absence of a short life xenon-tube, which is usually the first part which has to be replaced.

- Frequency range: 0…120,000 FPM
- Low-wear LED light trigger
- Illumination level 300 x 500 mm
- High intensity of light
- 120 LEDs

 

Stroboscope RT STROBE 3000 LED
£ 1,270.00
Price excl. VAT &. delivery
2 year Warranty
The main advantage of a steady-state stroboscope RT STROBE 3000 LED with intelligent LED-technology results from the absence of a short life xenon-tube, which is usually the first defective part which has to be replaced. 

Flash frequency: 0 ... 120000 FPM
- 6000 LUX at 30 cm
- Illumination area of 20 by 30 cm
- Widths > 300 mm
- Strobes can be connected in parallel
- external trigger input
Stroboscope RT STROBE 5000 LED
£ 1,575.00
Price excl. VAT &. delivery
2 year Warranty

The main advantage of a steady-state stroboscope RT STROBE 5000 LED with intelligent LED-technology results from the absence of a short life xenon-tube, which is usually the first part which has to be replaced.


- Frequency range 0…120,000 FPM
- Low-wear LED light trigger
- Illumination level 300 x 500 mm
- High intensity of light
- 120 LEDs

 

Strobe Rotation Meter RT STROBE 3000 LED
£ 1,270.00
Price excl. VAT &. delivery
2 year Warranty

Stationary Strobe Rotation Meter with intelligent LED-technology. 6000 LUX at 30 cm.


- Wear-resistant LED flash production
- 0 to 120,000 FPM
- 6000 LUX at 30 cm
- Illumination area of 20 by 30 cm
- Widths > 300 mm
- Strobes can be connected in parallel

 

Strobe Tachometer RT STROBE 3000 LED
£ 1,270.00
Price excl. VAT &. delivery
2 year Warranty

Stationary strobe tachometer with intelligent LED-technology.


- Wear-resistant LED flash production
- 0 to 120,000 FPM
- 6000 LUX at 30 cm
- Illumination area of 20 by 30 cm
- Widths > 300 mm
- Strobes can be connected in parallel

 

Accelerometer PCE-VM 5000-KIT
£ 2,536.00
Price excl. VAT &. delivery
2 year Warranty

The 4-channel PCE-VM 5000 accelerometer performs vibration measurements on up to 4 places at the same time. The vibration velocity, acceleration, and displacement in a frequency range of 10 Hz to 1 kHz can be measured. The cables of the vibration sensors are 1.2 m / 3.9 ft long, so the accelerometer is able to record vibrations at different points of the component to be tested.


- Frequency range: 10 Hz ... 1 kHz
- Measurement of acceleration, velocity and displacement
- Connection of up to 4 sensors simultaneously
- Data storage on SD card
- Including 2 additional sensors for vibration

Stroboscope PCE-DSX 20-ICA Incl. ISO Calibration Certificate
£ 530.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The stroboscope light PCE-DSX 20-ICA is mostly used for speed or vibration measurement or for motion observations. This stroboscope light has a small design and has a low weight. Thus, the stroboscope light can be conveniently used even in measurements in hard to reach places.

Flash frequency: 50 ... 35000 FPM
Accuracy: ±(0.05% of measured value + 2 Dgt)
- Flash frequency
- phase shift
- Lamp type: Xenon flash
- Flash response time: 10 ... 30 μs
with trigger input
- Incl. ISO calibration certificate
Stroboscope PCE-OM 15-ICA Incl. ISO Calibration Certificate
£ 481.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration

PCE-OM 15-ICA is a stroboscope with trigger functionality. This easy-to-use portable digital stroboscope gun features high / low range selection and push-button rate control to scale the flash rate slower (x½) and faster (x2). In addition, two knobs allow coarse and fine adjustment of the flash rate.


Flash frequency: 50 ... 30000 rpm
Accuracy: ± 0.05% + 1 digit
- Bright 6500K xenon light bulb
- 10 mm / 0.4 in 5-digit LCD
- High / low range selection
- Adjustable coarse and fine flash rates
- Incl. ISO Calibration Certificate

Vibration Analyzer PCE-VM 5000-KIT
£ 2,536.00
Price excl. VAT &. delivery
2 year Warranty

The 4-channel PCE-VM 5000 Vibration Analyzer performs vibration measurements on up to 4 places at the same time. The vibration velocity, acceleration, and displacement in a frequency range of 10 Hz to 1 kHz can be measured. The cables of the vibration sensors are 1.2 m / 3.9 ft long, so the vibration analyzer is able to record vibrations at different points of the component to be tested.


- Frequency range: 10 Hz ... 1 kHz
- Measurement of acceleration, velocity and displacement
- Connection of up to 4 sensors simultaneously
- Data storage on SD card
- Including 2 additional sensors for vibration

Stroboscope PCE-DSX 20 with Trigger Input
£ 418.00
Price excl. VAT &. delivery
2 year Warranty
The stroboscope PCE-DSX 20 is mostly used for speed or vibration measurement or for motion observations. This stroboscope has a small design and has a low weight. Thus, the stroboscope can be conveniently used even in measurements in hard to reach places.


Flash frequency: 50 ... 35000 FPM
- Accuracy: ±(0.05% of measured value + 2 Dgt)
- Flash frequency
- phase shift
- Lamp type: Xenon flash
- Flash response time: 10 ... 30 μs
- with trigger input
Vibration Data Logger PCE-VM 5000-KIT
£ 2,536.00
Price excl. VAT &. delivery
2 year Warranty

The 4-channel PCE-VM 5000 vibration data logger performs vibration measurements on up to 4 places at the same time. The vibration velocity, acceleration, and displacement in a frequency range of 10 Hz to 1 kHz can be measured. The cables of the vibration sensors are 1.2 m / 3.9 ft long, so the vibration data logger is able to record vibrations at different points of the component to be tested.


- Frequency range: 10 Hz ... 1 kHz
- Measurement of acceleration, velocity and displacement
- Connection of up to 4 sensors simultaneously
- Data storage on SD card
- Including 2 additional sensors for vibration

Vibration Meter PCE-VM 5000-KIT
£ 2,536.00
Price excl. VAT &. delivery
2 year Warranty

The 4-channel PCE-VM 5000 Vibration Meter performs vibration measurements on up to 4 places at the same time. The vibration velocity, acceleration, and displacement in a frequency range of 10 Hz to 1 kHz can be measured. The cables of the vibration sensors are 1.2 m / 3.9 ft long, so the vibration measuring device is able to record vibrations at different points of the component to be tested.


- Frequency range: 10 Hz ... 1 kHz
- Measurement of acceleration, velocity and displacement
- Connection of up to 4 sensors simultaneously
- Data storage on SD card
- Including 2 additional sensors for vibration

Vibration Recorder PCE-VM 5000-KIT
£ 2,536.00
Price excl. VAT &. delivery
2 year Warranty

The 4-channel PCE-VM 5000 Vibration Recorder performs vibration measurements on up to 4 places at the same time. The vibration velocity, acceleration, and displacement in a frequency range of 10 Hz to 1 kHz can be measured. The cables of the vibration sensors are 1.2 m / 3.9 ft long, so the vibration recorder is able to record vibrations at different points of the component to be tested.


- Frequency range: 10 Hz ... 1 kHz
- Measurement of acceleration, velocity and displacement
- Connection of up to 4 sensors simultaneously
- Data storage on SD card
- Including 2 additional sensors for vibration

Illuminometer PCE-LMD 200-LD-KIT incl. luminance accessory
£ 3,070.00
Price excl. VAT &. delivery
2 year Warranty
The illuminometer is a precise measuring instrument that fulfils the highest requirements for light measurements. In accordance with DIN 5032-7, it fulfils the requirements of precision class A, which enables accurate and reliable measurement of light intensities. With an impressive measuring range of 0.000 lux to 500,000 lux, the illuminometer is extremely versatile.

- Measuring range: 0.000 lx ... 500 klux
- Resolution: 0.001 lx
- Precision in accordance with DIN 5032-7
- Accuracy class: A
- External sensor
- 8 GB measured value memory
incl. luminance accessory
Photometer PCE-LMD 200-LD-KIT incl. luminance accessory
£ 3,070.00
Price excl. VAT &. delivery
2 year Warranty
The photometer is a precise measuring instrument that fulfils the highest requirements for light measurements. In accordance with DIN 5032-7, it fulfils the requirements of precision class A, which enables accurate and reliable measurement of light intensities. With an impressive measuring range of 0.000 lux to 500,000 lux, the photometer is extremely versatile.

- Measuring range: 0.000 lx ... 500 klux
- Resolution: 0.001 lx
- Precision in accordance with DIN 5032-7
- Accuracy class: A
- External sensor
- 8 GB measured value memory
incl. luminance accessory
Stroboscope PCE-T 260-ICA Incl. ISO Calibration Certificate
£ 466.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The combination PCE-T 260 is a measuring instrument for use in maintenance, and production. In addition to the stroboscope light function, the tachometer-stroboscope also has the option of removing the rotational contacts and measuring temperatures. 
 
Flash frequency: 5 ... 99999 rpm
- Accuracy: ±0.05% + 1 Digit
Contact tachometer
- Stroboscope LED
- Temperature measurement:
  Type K, PT 1000, Infrared
- Incl. ISO calibration certificate
  (only for the tachometer function)