Order no.: RT STROBE 3000 LED

Stroboscope RT STROBE 3000 LED

£ 1,270.00
£ 1,524.00
RT STROBE 3000 LED
price ex. (VAT / delivery)
Delivery time: 1-2 working days

Description

Stroboscope RT STROBE 3000 LED
stroboscope with intelligent LED technology for amplitudes up to 6000 LUX /
no abrasion from electronic-flash-tubes / input signal generator
The main advantage of a steady-state stroboscope RT STROBE 3000 LED with intelligent LED-technology results from the absence of a short life xenon-tube, which is usually the first defective part which has to be replaced. In comparison to that, the LEDs of this stroboscope are nearly indestructible with no detectable wear. 80 LEDs achieve a significantly higher flash frequency than xenon-tubes and produce a subjectively pleasant light with noiseless flashes.

The activation of the rotation speed control counter occurs directly by the observed system or via the supplied control unit RT Strobe ECO control. This small control unit can simply be plugged into one of the jacks on the rear panel of the stroboscope. Due to the standard existing connections, both, a machine signal, and a signal of the control unit can be transmitted simultaneously. Switching between the two inputs can be achieved by using the rocker switch on the rear side of the stroboscope. Stationary Stroboscope with intelligent LED-technology.

Highlights

- Wear-resistant LED flash production
- 0 to 120,000 FPM
- 6000 LUX at 30 cm
- illumination area of 20 by 30 cm
- Adjustable brightness / sharpness
- Widths> 300 mm
- Strobes can be connected in parallel



Specification


Frequency range0 ... 120,000 FPM (flashes per minute)
Power supply24 VDC (+/- 10 %) / 20 W
DIN 41524 5-pin standard connector
external trigger input3 ... 30 V / max. 5 mA
potential-free optocoupler
DIN 41524 5pin standard plug
Uout = Uin, max. 200 mA
Trigger input switchable
Trigger output for parallel connection
Flash parameters of a stationary stroboscope
Light intensity / image sharpnessadjustable, using rotary knob
Intensity of single flashapprox. 0.7 Mega-Lux / 30 cm / 12˝
Illuminance4,000 Lux / 30 cm / 12˝ @2°
2,000 lux / 30 cm / 12˝ @1°
illumination area20 x 30 cm / 7.9 x 11.8˝
light colourapprox. 5,000 ... 8. 300 K
Housing of a stationary stroboscope
MaterialAluminium
Dimensions150 x 130x 112 mm / 6.0 x 5.1 x 4. 4˝
Weight900 g
Environmental conditions of a stationary stroboscope
Environmental temperature0 ... 40 °C (32 ... 114 °F)
Storage temperature-25 ... 70 °C (-10 ... 125 °F)
Humiditymax. 95 % non-condensing

Delivery Scope

1 x stationary stroboscope RT STROBE 3000 LED
1 x AC Adapter
1 x Manual,
1 x connector for trigger input and supply
1 x controller RT STROBE ECO

Downloads