Sound Level Meter Kit With Calibrator PCE-NDL-LEQ-KIT

Order no.: PCE-NDL-LEQ-KIT
£ 1,290.00
£ 1,548.00
PCE-NDL-LEQ-KIT
price ex. (VAT / delivery)
A / B / C / Z
Fast / Slow / Impulse / Peak Timing
Yes
Delivery time: 1-2 working days

- PCE-428

The Sound Level Meter PCE-428 is an optimal sound level meter for measurements at workplaces, construction sites, in traffic, airports, etc. The sound level meter is a Class 2 device and is equipped with an octave band frequency filter. Optionally, the sound level meter PCE-428 can be upgraded with a 1/3 octave band filter.

- Octave band or optional 1/3 octave band
- Accuracy class 2
- A, B, C & Z frequency evaluation 
- Fast, Slow, Pulse and Peak time weighting
- Statistics function


- PCE-NDL 10

The sound level meter is used to determine volume. The sound level meter PCE-NDL 10 is a handy measuring device that meets the highest requirements. In order to evaluate the measured data in the best possible way, it is possible to use the internal measuring data memory on the noise dosimeter. In addition, the sound level meter has an SD card slot, which allows the use of an SD card as an additional storage medium.

- Measuring range: SPL: Auto 30 ... 130 dB
- Resolution: 0.1 dB
- Low sampling rate
- Automatic or manual storage
- Memory interval selectable
- Backlit LC display
- Dose measurement or SPL measurement


- PCE-SC 42

Sound calibrator for recalibrating sound meters. Sound level meters are delivered pre-adjusted, the sensor of the device is subject to a time drift; with the sound calibrator you can always recalibrate the sound measuring device independently and thus have continuously optimal measuring results. The sound calibrator is an optimal supplement to the sound measuring device.

Class II Acoustic Sound Calibrator made of metal
- Frequency: 1 kHz / ± 0.1%
- Reference level: 94 dB and 114 dB
- Fault tolerance of 0.3 dB (20°, 760 mm Hg)


For detailed technical specifications, please refer to the data sheet or user manual.
PCE-428  
Measuring range 25 ... 136 dbA
Accuracy Class 2
Frequency range 20 Hz ... 12.5 kHz

Frequency analysis


- Octave filter: 20Hz ... 8kHz
- 1/3 Octave filter: 20Hz ... 12.5kHz (only optional via software update)
Frequency rating A, B, C, Z
Time rating Fast (F), Slow (S), Impulse (I), Peak
Storage 4 GB Micro SD Card
Interface RS-232; USB (memory readable via software or directly as mass storage)
Power supply - 4 x 1.5 V AA batteries
- 12 V / 1 A power plug
- 5 V / 1 A USB

 
PCE-NDL 10  
Measurement type


- SPL: Sound pressure level
- Dose: Test noise exposure

Measuring range


- SPL: Auto 30 ... 130 dB
- Dose: 70 ... 130 dB
Resolution 0.1 dB
Measurement functions




- dB (A and C frequency rating)
- Time evaluation (fast and slow)
- Data HOLD
- Recording function (MAX and MIN)
Frequency rating A and C
Time rating


- Fast - t = 125 ms
- Slow - t =  1 s
Frequency 31.5 ... 8000 Hz
Automatic data logger Log interval: 1 ... 3600 seconds
Manual data logger Manual log interval (interval must be set to "0")
Storage options


- internal memory for up to 16000 measured values
- SD Memory Card (1 ... 16 GB)
Data output RS-232, USB
Power supply Battery or mains voltage

 
PCE-SC 42  
Frequency 1 kHz / ±0.1%
Reference level 94 dB and 114 dB
Fault tolerance 0.3 dB (20°, 760 mm Hg)
Microphone opening 1/2" and 1"
Dimensions 138 x 48 x 48 mm / 5.43 x 1.88 x 1.88"  (L x W x H)
Working temperature -10° ... +50 °C / 14 ... 122 °F
Power supply 9V block battery

Delivery Contents PCE-428

1 x Sound Level Meter PCE-428
1 x 1/2" Measuring microphone Class 2
1 x Wind noise suppressor (foam ball)
1 x USB interface cable
1 x Software
1 x Power adapter
1 x Carrying case
1 x User manual

Note: The sound level meter comes with octave band filter. Optional upgrade to a 1/3 octave band filter is possible. 


Delivery Contents PCE-NDL 10

1 x Sound Level Meter PCE-NDL 10
1 x Microphone with retaining clip
1 x Carry bag
1 x Strap
1 x User manual 


Delivery Contents PCE-SC 42

1 x Sound Calibrator PCE-SC 42
1 x User manual
1 x 9V Battery