Relative Humidity Meter PCE-G1
£ 974.00
Price excl. VAT &. delivery
2 year Warranty
The relative humidity meter is intended for stationary measurement of relative humidity and temperature and direct display on a large display. This relative humidity meter consists of an LED display (100 mm high) and is protected according to IP 54.

- Temperature measuring range: 0 ... +60 °C (Celsius only)
- Humidity measuring range: 10 ... 95 % RH
- Up to 50 m (164 ft) reading distance
- External sensor (wired)
Relative Humidity Meter PCE-G1A
£ 978.00
Price excl. VAT &. delivery
2 year Warranty
The relative humidity meter is a measuring device for stationary measurement of relative humidity and temperature. This relative humidity meter consists of an LED seven-segment display with a digit height of 100 mm, which enables you to read it very well even at a distance of up to 50 m.

- Temperature measuring range: 0 ... +60 °C (Celsius only)
- Humidity measuring range: 10 ... 95 % RH
- Up to 50 m (164 ft) reading distance
- External sensor (wired)
- Voltage supply: 230 V AC
- with analogue output 4 ... 20 mA
Multifunction Relative Humidity Meter PCE-WB 20SD
£ 493.00
Price excl. VAT &. delivery
2 year Warranty

PCE-WB 20SD is a multifunction data-logging relative humidity meter used to measure indoor / outdoor wet bulb globe temperature (WBGT), black globe temperature (TG), wet bulb temperature (WB), dew point temperature, air temperature (TA) and relative humidity. Thus, this multipurpose data-recording device is an ideal tool for evaluating heat stress risks in different work environments.


- Programmable WBGT alarm setting with audible and visual alerts
- Manual (push-button) or automatic (adjustable 1 ... 3600 sec) sampling
- SD card memory (1 ... 16 GB) allows for quick and easy data transfer to a PC

 

Multifunction Relative Humidity Meter PCE-MMK 1
£ 444.00
Price excl. VAT &. delivery
2 year Warranty
Topseller

PCE-MMK 1 is a portable handheld digital moisture meter used to measure the moisture content of wood, paper, textiles, concrete and other building materials. This multifunction relative humidity meter also measures ambient temperature and ambient relative humidity.


Measuring ranges:
- Wood, paper, textiles: 1 ... 75% moisture
- Concrete, building materials: 0.1 ... 2.4% moisture
- Ambient temperature: -40 ... 70°C / -40 ... 158°F
- Ambient relative humidity (RH): 0 ... 100 % RH

Relative Humidity Meter PCE-MA 200
£ 1,090.00
Price excl. VAT &. delivery
2 year Warranty

The relative humidity meter PCE-MA 200 is used to weigh a range of substances up to 200g / 7.05oz and measure their moisture content. A halogen lamp heats up the chamber to 199 °C / 390 °F. The relative humidity meter dries the substance to be weighed within the heating chamber and determines the moisture content from the difference in weight.


- Testing or weighing capacity: 200 g / 7.05 oz
- Readability: 1 mg / 0.001 g
- Adjustable drying temperature and time
Accuracy to 0.01 %

Multi-function Relative Humidity Meter PCE-WM1
£ 908.00
Price excl. VAT &. delivery
2 year Warranty

PCE-WM1 is a multi-function relative humidity meter used to determine relative humidity (% RH), absolute humidity (g/m³), air temperature, dew-point temperature and surface temperature (°C). This Metric-only measuring instrument comes complete with an external sensor probe for taking the surface temperature of different materials.


- Temperature range: -20 ... 80°C 
- Relative humidity range: 10 ... 95% RH
- Absolute humidity range: 0.5 ... 74.4 g/m³

 

Relative Humidity Meter PCE-MA 100
£ 1,019.00
Price excl. VAT &. delivery
2 year Warranty

The relative humidity meter PCE-MA 100 allows different materials to be weighed and their moisture contents determined. The heating chamber is heated by halogen lamps up to 199 °C. In this chamber, the relative humidity meter dries the material to be weighed, and then calculates the moisture content from the weight difference.


- Testing or weighing capacity: 110 g / 3.88 oz
- Readability: 1 mg / 0.001 g / 0.01 %
- Adjustable drying temperature and time

Relative Humidity Meter PCE-MA 110TS
£ 930.00
Price excl. VAT &. delivery
2 year Warranty
The relative humidity meter has a moisture measuring range of 0 … 100%. The relative humidity meter is operated via the 5" touchscreen. To determine the moisture content with the relative humidity meter, a sample is evenly distributed on the sample pan.

- Measuring range: 0 ... 110 g / 0 ... 3.88 oz
- Resolution: 0.001 g
- Memory for 32 drying parameters
- 5" touch screen for easy operation
- RS-232 interface for connection to a PC
Multifunction Relative Humidity Meter PCE-330
£ 370.00
Price excl. VAT &. delivery
2 year Warranty

PCE-330 is a multifunction relative humidity meter or detector with a quick-response sensor for determining ambient temperature, relative humidity and dew point temperature. Equipped with an easy-to-read dual display, this data-logging indoor air quality (IAQ) meter features a large internal memory with storage for up to 16,000 recorded values.


- Temperature range: -20 ... 60°C / -4 ... 140°F
- Relative humidity range: 0 ... 100% RH
- Resolution: 0.1° / 0.18°F
- Accuracy: ± 0.8°C / ± 1.5°F, ± 2.0 ... 4.0% RH
- Internal memory: up to 16,000 date- and time-stamped readings

 

Relative Humidity Meter PCE-MA 110
£ 823.00
Price excl. VAT &. delivery
2 year Warranty

PCE-MA 110 is a halogen relative humidity meter or analyzer that functions on the gravimetric or loss on drying (LOD) principle. The relative humidity meter uses the halogen method to dry the material sample. Moisture content is calculated based on the weight difference before and after the drying procedure. Calibration of the relative humidity meter can be performed at any time using the automatic calibration function and the included 100 g weight.


- Weighing range: 0.1 g ... 110 g / 0.0035 ... 3.88 oz
- Weighing resolution or readability: 0.01 g / 10 mg
- Moisture content measuring range: 0 ... 100%
- Moisture content resolution or readability: 0.1%
- Adjustable drying time and temperature
- Memory stores up to 16 drying profiles
- RS-232 interface or port

Relative Humidity Meter PCE-MA 202
£ 841.00
Price excl. VAT &. delivery
2 year Warranty

The PCE-MA 202 is an oven-drying relative humidity meter for weighing and heating material samples to determine moisture content. The heating chamber warms up to 199 °C / 390 °F with the use of halogen lamps. Drying of the sample to be weighed takes place within the chamber of the relative humidity meter and the moisture content is subsequently calculated from the difference between the initial and final weight.


- Testing or weighing capacity: 200 g / 7.05 oz
- Readability: 10 mg / 0.01 g / 0.1%
- Adjustable drying temperature and time

Relative Humidity Meter PCE-MA 200TS
£ 842.00
Price excl. VAT &. delivery
2 year Warranty
Our relative humidity meter enables easy determination of absolute moisture in various materials. A significant advantage of an relative humidity meter over devices using capacitive measuring methods is that the relative humidity meter operates independently of characteristic curves and provides more accurate results.

- Weighing range up to 200 g
- Measurement range from 0 ... 100 %
- High resolution of 0.01 g
- Heating temperature from 40 ... 165 °C
- Memory for 32 measurements
- LC Touch Display
- Data interface: RS232
Relative Humidity Meter PCE-EM 883
£ 192.00
Price excl. VAT &. delivery
2 year Warranty
Our multifunctional relative humidity meter PCE-EM 883 combines all important features for measuring the ambient conditions in one device. The relative humidity meter is designed as fast as possible to determine as many parameters as possible. Due to the large number of external sensors that the relative humidity meter brings with it, such fast and precise measurements are possible.

- Measurement of all relevant environmental parameters
- Wind speed
- Temperature
- Humidity
- Sound level
- Light
- High accuracy
- MIN, MAX, HOLD function
Air Humidity Meter PCE-DPM 10
£ 3,452.00
Price excl. VAT &. delivery
2 year Warranty
The air humidity meter from PCE Instruments enables precise determination of the dew point in pressurised systems. Thanks to its robust design, the device can be used for industrial applications up to 15 bar.

- Dew point measuring range from -100 ... +50 °C
- Pressure range up to 15 bar differential pressure
- Data logger for up to 100 million measured values
- Adjustable alarm limits
- Touch LC display
Electromagnetic Radioactivity Meter PCE-EM 30
£ 1,629.00
Price excl. VAT &. delivery
2 year Warranty

PCE-EM 30 is a digital portable 3-axis electromagnetic radioactivity meter or EMF detector used to measure electromagnetic radiation generated by electronic devices and electric installations. This triple-axis EMF meter provides greater precision than single-axis models as well as affords the ability to assess EMFs from more than one source at a time.


- Measuring range: 0 to 199.99 V/m, 0 to 99.999 W/m², 0 to 9.9999 mW/cm²
- EMF bandwidth: 100 kHz to 3 GHz
- Measures EMF of 5G cellular Low-band and Mid-band
- Comes with two external sensor probes (for low and high frequency ranges)

 

Environmental Electromagnetic Radiation Meter PCE-EM 30
£ 1,629.00
Price excl. VAT &. delivery
2 year Warranty

PCE-EM 30 is a digital portable 3-axis environmental electromagnetic radiation meter or EMF detector used to measure electromagnetic radiation generated by electronic devices and electric installations. This triple-axis EMF meter provides greater precision than single-axis models as well as affords the ability to assess EMFs from more than one source at a time.


- Measuring range: 0 to 199.99 V/m, 0 to 99.999 W/m², 0 to 9.9999 mW/cm²
- EMF bandwidth: 100 kHz to 3 GHz
- Measures EMF of 5G cellular Low-band and Mid-band
- Comes with two external sensor probes (for low and high frequency ranges)

 

Relative Humidity Meter PCE-MA 200-ICA incl. ISO Calibration Certificate
£ 1,193.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The Relative Humidity Meter PCE-MA 200 is used to weigh a range of substances up to 200g / 7.05oz and measure their moisture content. A halogen lamp heats up the chamber to 199 °C / 390 °F. The Relative Humidity Meter dries the substance to be weighed within the heating chamber and determines the moisture content from the difference in weight.

- Testing or weighing capacity: 200 g / 7.05 oz
- Readability: 1 mg / 0.001 g / 0.01 %
- Adjustable drying temperature and time
- Accuracy to 0.01 %
- incl. ISO Calibration Certificate
Humidity Detector PCE-A-315
£ 6,444.00
Price excl. VAT &. delivery
2 year Warranty

The humidity detector provides exceptionally accurate grain moisture measurement in real time. The humidity detector uses low-power microwaves to penetrate the surface every 0.2 second and obtain interior moisture readings without causing any damage. An integrated temperature probe ensures the readings are accurate from 5°C to 55°C / 41°F to 131°F. Suitable for the continuous monitoring of moisture in corn, soybeans, wheat, rice, sorghum, barley, oats, rye, hops, green coffee, cocoa beans, oil seeds, flax seeds, sunflower seeds, poppy seeds, pumpkin seeds, spelt seeds, buckwheat, sesame, peas, fava beans, scarlet runner beans, triticale, amaranth and jatropha.


- Boasts a measurement range of 5% to 40% for moisture content during
  continuous mass flow
with an error of just ±0.5% from 5% to 18% grain
  moisture
- Lowers energy costs by enabling shorter drying times and reduces labor costs
  by automating the moisture monitoring process
- Provides nearly maintenance-free operation, delivering consistently accurate
  moisture readings over time
- Analog output of 4 to 20 mA can be converted to digital for dryer control