Pipe Locator PCE-186 CB

Order no.: PCE-186 CB
£ 151.00
£ 181.20
4250348719027
PCE-186 CB
price ex. (VAT / delivery)
Delivery time: 1-2 working days
Pipe locator PCE-186 CB
Cable finder with voltage tester / Non-conducting probe tip / Headphone jack / RJ-11 Plug with crocodile clamps / For line break detection / For non-live cables / Transport bag 

The cable finder PCE-186 CB consists of a transmitter and a receiver. The transmitter of the line finder has many functions. For example, the line finder can be used to find wires in walls or break cables. Another function of the line finder is the testing of telephone sockets. To do this, the RJ-11 connector must be plugged into the telephone socket to be tested. The transmitter of the line finder signals an incoming call based on the LEDs. This feature does not require a phone for verification. 

In addition to these functions, the line finder has a multimeter function. This allows AC voltages and DC voltages up to 1000 VDC to be measured. Furthermore, resistance measurements and continuity measurements are possible. Because of this variety of functions, the line finder is an optimal helper for maintenance and repair work on cables.

- Voltage measurement AC / DC
- For detection of line interruptions
- Non-conductive probe tip
- Sensitivity adjustment
- Transport bag
- Cable tracking in walls and cable duct
- Different beeps
- Resistance measurement
AC voltage measurement  
Measuring range Resolution Accuracies
400 mV 0.1 mV ± 1% + 5 Dgt
4V 1 m V ± 1% + 5 Dgt
40V 10 mV ± 1% + 5 Dgt
400V 100 mV ± 1% + 5 Dgt
750V 1V ± 1% + 5 Dgt
     
DC    
Measuring range Resolution Accuracies
400 mV 0.1 mV ± 0.5% + 3 Dgt
4V 1 mV ± 0.5% + 3 Dgt
40V 10 mV ± 0.5% + 3 Dgt
400V 100 mV ± 0.5% + 3 Dgt
750V 1V ± 0.5% + 3 Dgt
     
Resistance    
Measuring range Resolution Accuracies
400 Ω 0.1 Ω ± 1.2% + 3 Dgt
4 kΩ 1 Ω ± 1.2% + 3 Dgt
40 kΩ 10 Ω ± 1.2% + 3 Dgt
400 kΩ 100 Ω ± 1.2% + 3 Dgt
4 MΩ 1 kΩ ± 1.2% + 3 Dgt
40 MΩ 10 kΩ ± 2.0% + 4 Dgt
     
Input impedance 10 MΩ
Overvoltage protection 500V DC
   
Continuity test  
Measuring range Beep
400 Ω > 25 Ω
   
Line detection By beep
Beep switchable Slowly pulsating tone
  Fast pulsating tone
   
Locating depth Max. 50 cm
Connections RJ-11 plug, coconut clamps
Power supply receiver     9V block battery
Power supply transmitter 9V block battery (transmitter function)
  2 x 1.5V AAA (voltmeter)
Environmental conditions          0 ... 50°C / 32 ... 122°F, 5 ... 95% rh
Weight transmitter About 265 g / < 1 lb
Weight receiver About 89 g / < 1 lb
   


1 x Pipe locator PCE-186 CB
1 x Pair of test leads
2 x 9V block battery
2 x 1.5V AAA batteries
1 x Transport bag
1 x User manual