pH Meter PCE-PHD1-MSR300 incl. Magnetic Stirrer PCE-MSR 300

Order no.: PCE-PHD1-MSR300
£ 534.00
£ 640.80
PCE-PHD1-MSR300
price ex. (VAT / delivery)
Handheld
0 ... 50 °C / 32 ... 122 °F
0 ... 14 pH
Delivery time: 1-2 working days
pH Meter PCE-PHD1-MSR300 incl. Magnetic stirrer PCE-MSR 300

The pH meter PCE-PHD 1 is a true all-rounder for checking water quality. The portable pH meter is used to control the water parameters pH, redox, conductivity, salinity, oxygen and is also very suitable for temperature measurement. Combination unit for pH, conductivity, oxygen and temperature.

A 3-point calibration and an automatic temperature compensation guarantees high accuracy even with very fluctuating measuring temperatures. The datalogger is supplied with pH and conductivity probe. As accessories different probes are available. All values ​​can be stored directly on the SD card (1 ... 16 GB) (Excel file) or transferred via the RS-232 interface directly from the datalogger to a PC. For this we optionally offer a software and the suitable RS-232 interface cable as an accessory.

Magnetic stirrer PCE-MSR 300 with a large display and adjustment of temperature, stirring speed and stirring time. The set data can be read directly on the display of the magnetic stirrer. The max. stirring amount in this magnetic stirrer is 2 liters. The heating plate of the magnetic stirrer PCE-MSR 300 can be heated to a temperature of 300°C / 572°F.

The supplied temperature sensor detects the temperature of the liquid and monitors the preset temperature of the magnetic stirrer. The simple geometry of the stirring fish, the magnetic stirrer PCE-MSR 300, also facilitates the cleaning considerably. To get the little magnet back out of the mixing container, use a long plastic-coated magnetic rod, also called a stir-fishing rod.

pH Meter PCE-PHD 1
- Optimum price / performance ratio
- Real-time data logger
- SD card memory (1 ... 16 GB)
- The stored data are stored directly as an Excel file on the SD card (no software is needed for evaluation)
- RS -232 Interface for online data transmission
- High accuracy
- Low-batt display
- Large LC display
- Adjustable measuring rate
- Easy to operate
- Robust housing
- Incl. PH and conductivity electrode
- Automatic calibration
- Manual or automatic temperature compensation
- BNC connector
- Suitable for laboratory and on-site measurement

Magnetic Stirrer PCE-MSR 300
- Stirring quantity: 2 liters
- Stirring speed: 0 ... 1250 rpm
- Temperature range: RT ... 300°C / 572°F 
- Timer: 0 ... 999 min.
pH Meter PCE-PHD 1  
Measuring range0.00 ... 14.00 pH
Resolution0.01 pH
Accuracy± 0.02 pH + 2 digits
Calibration3-point calibration (pH4, pH7 and pH10)
Temperature compensation Automatically with additional temperature sensor
(0 ... 60°C / 32 ... 140°F) or manually from 0 ... 100°C / 32 ... 212°F
  
Conductivity measurement 
Measuring range0 ... 200.0 μS / cm
0.2 ... 2.000 mS / cm
2 ... 20.00 mS / cm
20 ... 200.0 mS / cm
Resolution0.1 μS / cm
0.001 mS / cm
0.01 mS / cm
0.1 mS / cm
Accuracy ± 2% of reading + 1 digit
CalibrationAt 1413 μS / cm
Temperature compensationAutomatically from 0 ... 60°C / 68 ... 572°F 
   
TDS measurement  
Measuring range 0 ... 132 ppm
132 ... 1320 ppm
1320 ... 13200 ppm
13200 ... 132000 ppm
Resolution 0.1 ppm
1 ppm
10 ppm
100 ppm
Accuracy ± 2% of reading + 1 digit
Temperature compensation Automatically from 0 ... 60°C / 68 ... 572°F
   
Salinity measurement  
Measuring range 0 ... 12% (weight percent)
Resolution 0.01%
Accuracy ± 0.5% of the measuring range
Temperature compensation Automatically from 0 ... 60°C / 68 ... 572°F
Electrode usable in the pH range pH 4 ... pH 10
   
Temperature Measurement  
Measuring range 0 ... 60°C / 68 ... 572°F
Resolution 0.1°C / 0.18°F
Accuracy ± 0.8°C / 1.4°F
   
General  
Measuring rate Adjustable from 1 second to 8 hours 59 minutes 59 seconds
Display LC display 52 x 38 mm / 2 x 1.5"
Data storage Flexible via SD card memory 1 ... 16 GB
(2 GB SD card included)
Interface RS-232
Software Available as an accessory
Power supply 6 x 1.5V AA batteries / 9V power adapter (optional)
Environmental conditions 0 ... 50°C / 32 ... 122°F <85% RH
Dimensions 177 x 68 x 45 mm / 7 x 2.7 x 1.8 in
Weight 490 g / 1.1 lbs
   
Magnetic Stirrer PCE-MSR 300  
Stirring 1
Stirring quantity max. per stirring point     2 l
Stirring quantity max. 2 l
Speed ​​range 0-1250 rpm
Temperature range 20 ... 300°C / 68 ... 572°F
Heating capacity 300 W
Accuracy < 100°C / 212°F, ± 1°C / 1.8°F
> 100°C / 212°F, ± 3°C / 5.4°F
Plates dimensions 135 x 135 mm / 5.3 x 5.3 in
Weight 2.2 kg / 4.9 lbs
Timer range 0 ... 999 min
Power 220V / 50Hz
Dimensions 230 x 180 x 120 mm / 9.1 x 7.1 x 4.7 in
   


1 x pH Meter PCE-PHD1-MSR300 incl. Magnetic stirrer PCE-MSR 300
1 x pH electrode
1 x Conductivity electrode
1 x SD memory card 2 GB
6 x Battery
1 x Stirrer
1 x Temperature sensor
2 x User manual