Outdoor Construction Noise Meter Kit PCE-432-EKIT

Order no.: PCE-432-EKIT
ISO Calibration
£ 4,214.00
£ 5,056.80
PCE-432-EKIT
price ex. (VAT / delivery)
I
Yes
Handheld
Yes
Delivery time: up to 10 working days

Construction noise meter PCE-432-EKIT (Class 1) incl. outdoor noise level meter kit
Handheld sound level meter / Octave band filter / A, B, C and Z rating filter upgradeable / Fast, Slow and Pulse Evaluation / Data logger / USB

The construction noise meter PCE-432 is used to measure the noise on building sites. This construction noise meter meets the requirements of class 1 sound level meters. In addition to the analysis of the construction noise in octave band or optionally in 1/3 octave band, the construction noise meter is able to determine the exact position of the sound level meter via GPS. The measuring range of the construction noise meter extends from 25 ... 136 dbA at a construction noise frequency between 20 Hz and 12.5 kHz. The construction noise meter has various automatic measurement functions such as Leq, Lmax, Lmin, Lpeak ... For frequency evaluation, the basis of evaluation A, B, C and Z are always available as standard for the construction noise meter. The display is able to show the measured values of the construction noise meter PCE-432 numerically with bargraphs or graphically.

The highlight of the construction noise meter PCE-432-EKIT is the outdoor accessory. The measuring device is thus delivered in such a way that it can be installed and operated permanently or temporarily outdoors, i.e. directly on construction sites. The construction noise measuring kit consists of a waterproof plastic case, a wind and rain protection for the Class 1 measuring microphone, additional batteries and a corresponding charger for the batteries. With the help of additional batteries, the construction noise meter can easily measure and record the noise for several days on a building site.

The stored measurement data can be analyzed and evaluated after the construction noise measurement via the supplied software or other spreadsheet programs.


- 1/1 octave band included
- 1/3 octave band optional
- Accuracy class 1
- Integrated GPS receiver
- A, B, C & Z frequency rating
- Fast, Slow, Pulse and Peak time weighting
- Statistics function
- Display of the sound profile as a graph
- 3 measuring profiles adjustable
- Low inherent noise
- ICCP microphone 40 mV /PA
- Alarm level adjustable
- Incl. ISO calibration certificate

Measuring range

22 ... 136 db(A)

Accuracy

Class 1

Frequency range

3 Hz ... 20 kHz

Standards

GB/T 3785.1-2010
GB/T 3785.2-2010
IEC 60651:1979
IEC 60804:2000
IEC 61672-1:2013
ANSI S1.4-1983
ANSI S1.43-1997

Frequency analysis

1/1 Octave band filter: 8 Hz ... 16 kHz
1/3 Octave band filter: 6.3 Hz ... 20 kHz

Microphone

1/2"
Microphone Class: 1
Sensitivity: 40 mV/PA
Frequency range: 3 Hz ... 20 kHz
Connection: TNC
Power supply: ICCP Standard

Data-logging interval

1 s ... 24 h (adjustable)

Measuring functions

LXY (SPL), LXeq, LXYSD, LXSEL, LXE, LXYmax, LXYmin, LXPeak, LXN

X = Frequency weighting: A, B, C, Z
Y = Time weighting: F, S, I
N = Statistics in %: 1 ... 99 %

Frequency weightings

A, B, C, Z

Time weightings

Fast (F) 125ms, Slow (S) 1 sec, Impulse (I) 35 ms

Inherent noise

Microphone: 19 db(A), 25 db(C), 31 db(Z)
Electronics: 13 db(A), 17 db(C), 24 db(Z)

AD converter

24 Bit

Sample rate

Standard: 48 kHz
LN Mode: 20 ms

Measuring display

Numerical
Bar graph
Graphical

Display

160 x 160 pixel LCD with backlight

Memory

4 GB Micro SD card

Interface

USB (Memory readable via software or directly as mass storage)
RS-232

Voltage output

AC 5V RMS
DC 10 mV/db

Alarm

Adjustable

GPS Yes, GPS receiver for location determination

Power supply

4 x 1.5 V AA Batteries
12 V / 1 A Power plug
5 V / 1 A USB

Battery life

Min. 10 h continuous use

Dimensions

70 x 300 x 36 mm / 2.76 x 11.81 x 1.42" (W x H x D)

Weight

Approx. 620 g / 1.4 lbs incl. batteries


1 x Construction Noise Meter PCE-432-EKIT incl. Outdoor Noise Level Meter Kit
1 x 1/2" measurement microphone class 1
1 x Wind noise suppression (foam ball)
1 x USB interface cable
1 x Software is a free download
1 x Power adapter
1 x Suitcase
1 x User manual
1 x ISO calibration certificate
1 x Outdoor Noise Level Meter Kit PCE-4xx-EKIT
1 x Waterproof PELI transport case
1 x Wind and rain protection for microphone of the PCE-4xx series
1 x Charger for internal batteries
2 x 12 V lead gel batteries
1 x Tripod
1 x 2 m / 6ft 6" microphone cable
1 x Connection cable for power supply (optional Schuko or US connection)


Note: The outdoor construction noise meter PCE-432-EKIT comes with octave band filter. Optionally upgrade with a 1/3 octave band filter (see option)