Industrial Measurement Products and Solutions

Multimeter

Order no.: PCE-HDM 10

PCE-HDM 10 is a heavy-duty, true RMS digital multimeter with a high-contrast, clear, easy-to-read, graphic, backlit, color LCD screen. PCE-HDM 10 accurately measures electric current, AC / DC voltage, resistance, capacitance, frequency and temperature. The meter also allows for diode and continuity testing.


- CAT III 1000 V live electric circuit measurement category
- Bluetooth interface for wireless data transfer
- Waterproof IP 67 ingress protection rating

 

Manufacturer: PCE Instruments
£ 168.00

Price excl. VAT &. delivery

Order no.: PCE-LT1

LAN Tester for quickly testing networks, with functions to also be used as a multimeter.


- Measures AC and DC, alternate and continuous resistance, and resistance
- Continuity tester with buzzer and diode tester
- Safety: CAT II 1000 V, EN-61010-1
- Auto shut-off
- Manual or automatic testing of individual connectors
- For testing cables, connections and cables that run within wall

 

Manufacturer: PCE Instruments
£ 34.00

Price excl. VAT &. delivery

Order no.: PCE-DC1

The PCE-DC1 Mini Multimeter has been designed to detect, indirectly, AC/DC current and frequency. The clamp has white LED integrated to allow for the point of measurement to be illuminated, and a function to test the voltage without contact.


- AC current (50/60 Hz): 200 A / 0.1 A or 100 mA / ±3.0% + 8 digits
- DC current: 200 A / 0.1 A or 100 mA / ±2.8% + 8 digits
- AC test voltage (without contact): 100 VAC to 600 VAC 50 / 60 Hz
- Frequency (3 ranges): 40 to 50 Hz / 51 to 510 Hz/ 0.51 to 1 kHz

 

Manufacturer: PCE Instruments
£ 39.00

Price excl. VAT &. delivery

Order no.: PCE-DC3

This Multimeter has been developed to determine indirectly, the AC/DC currents with high accuracy. A non-contact Multimeter and a torch to illuminate the area being measured, have been integrated into this device.


- AC current (50 / 60 Hz): 2 A  / 1 mA / ± 2.8 % + 10 dgt
- DC current: 2 A / 1 mA / ± 3.0 % + 10 dgt
- AC overload protection: 100 VAC up to 600 VAC 50 / 60 Hz

 

Manufacturer: PCE Instruments
£ 60.00

Price excl. VAT &. delivery

Order no.: PCE-DC2

Digital Clamp Meter for measuring AC/DC current, AC voltage and resistance. This clamp meter is designed to indirectly detect AC/DC current and ohms. The clamp has white LEDs which illuminate the point of measurement and test the voltage without contact. Small dimensions of this device allow to take measurements in places with limited access. The clamp meter comes manufacturer calibrated and can optionally be certified according to ISO or NIST standards.


- AC / DC current, voltage and resistance measurement
- 3 2/3-digit LCD display
- Power supply: 2 x 1.5V AAA battery
- Dimensions: 164 x 65 x 32 mm / 6.4 x 2.5 x 1.2 in

 

Manufacturer: PCE Instruments
£ 63.00

Price excl. VAT &. delivery

Order no.: PCE-UT 61E

The TRMS PCE-UT 61E Multimeter the ideal device to be used in laboratories, research institutes as well as for a electrician on the spot. The TRMS PCE-UT 61E Multimeter offers diverse functions such as: Hold function, max./ min./ relative and peak value to allow for a quick and secure measurement.


- TRMS measurement
- RS-232 port
- Large LCD display
- Auto-range

 

Manufacturer: PCE Instruments
£ 69.00

Price excl. VAT &. delivery

Order no.: PCE-EM 886

PCE-EM 886 is a portable handheld multifunctional digital device used to measure sound, light, humidity, temperature, AC / DC current, electrical resistance, capacitance and frequency.


- Sound: 35 ...100 dB
- Light: 4,000 ... 40,000 lux
- Humidity: 33 ... 99% RH
- Temperature: 0 ... 50 °C Indoor / -20 ... 1300 ºC Type K
- Auto-ranging electrical multimeter 

 

Manufacturer: PCE Instruments
£ 74.00

Price excl. VAT &. delivery

Order no.: PCE-LCT 1

With the PCE-LCT 1 Multimeter it is possible to measure current leakages up to a range of 100 A. PCE-LCT 1 Multimeter can measure leakage currents which appear when current flows through electrical conductors which are not designed for conduction current.


- Measures current up to 100 A
- Measures voltage up to 600 V
- Measures resistance up to 400 O
- Test cables are included

 

Manufacturer: PCE Instruments
£ 100.00

Price excl. VAT &. delivery

Order no.: PCE-PCM 1

PCE-PCM1 Multimeter is a multiple-use device to measure both absorbed power and energy consumption. Apart from measuring alternating current and voltage, the PCE-PCM1 Multimeter can determine current absorbed power in single and three-phase networks, as well as the energy consumption (kWh) in single-phase networks.


- Internal memory: 99 measurement values
- USB port and software
- Three-phase power measurement
- Energy meter
- TRMS

 

Manufacturer: PCE Instruments
£ 100.00

Price excl. VAT &. delivery

Order no.: PCE-DC 41

The multimeter PCE-DC 41 can measure voltages up to 600 V, currents up to 600 A and electrical resistance up to 1000 Ω. To perform a measurement, you can either use the measuring leads, which are included in the package of the multimeter, or you can use the integrated clamp mechanism. By using the clamp of the multimeter, you are able to measure the electrical parameters of an electrical conductor contact-free and without disconnecting it.


- Voltage: 600 V AC/DC
- Current: 600 A AC/DC
- Electrical Resistance: 1000 Ω
- Clamp mechanism

 

Manufacturer: PCE Instruments
£ 108.00

Price excl. VAT &. delivery

Order no.: PCE-UT 532

This PCE-UT 532 meter combines a multi-featured multimeter with an insulation tester. In addition to the usual parameters such as voltage, current and resistance, this multimeter is also equipped with a frequency and capacitance measurement.


- Automatic range selection
- Insulation tester
- Multimeter function
- Diodes test
- Continuity test
- Temperature measurement
- Frequency meter
- Resistance tester
- Capacity measurement
- TRMS in current measurement

 

Manufacturer: PCE Instruments
£ 129.00

Price excl. VAT &. delivery

Order no.: PCE-DM 22

The PCE-DM 22 handheld multimeter with data logger is a very capable device which covers almost all your needs. Along with determining DCV, ACV, DCA, ACA and resistance accurately, this multimeter with data logger will also determine capacitance, frequency, revolutions and temperature, as well as doing continuity checks and diode tests.


- DCV:   400 mV; 4/ 40/ 400/ 1000 V
- ACV:   400 mV; 4/ 40/ 400/ 750 V
- DCA:   400/ 4000 µA; 40/ 400 mA; 10 A
- ACA:   400/ 4000 µA; 40/ 400 mA; 10 A
- OHM:   400 Ω; 4/ 40/ 400 kΩ; 40 MΩ
- Cap.:   4/ 40/ 400 nF; 4/ 40/ 400 µF; 4/ 40 mF
- Freq.:  4/ 40/ 400 kHz; 4/ 40 MHz
- RPM:   4/ 40 kRPM; 4/ 40/ 400 MRPM
- Temp.: -50 °C to 1000 °C

 

Manufacturer: PCE Instruments
£ 151.00

Price excl. VAT &. delivery

Order no.: PCE-OC 2

PCE-OC 2 is a combination true-RMS, auto-ranging, digital multimeter and oscilloscope with a bandwidth up to 10 MHz and internal storage for up to 100 waveforms and measurements. A handy tool for electrical troubleshooting, PCE-OC 2:


- Measures voltage, current, resistance, frequency and capacitance
- Enables quick and easy testing of diodes and continuity
- Functions as a data logger

 

Manufacturer: PCE Instruments
£ 194.00

Price excl. VAT &. delivery

Order no.: PCE-PA6000

The Multimeter PCE-PA 6000 power analyzer can be used as a desktop or portable instrument for measuring active power, apparent power, power factor, energy consumption, AC voltage, AC current, DC voltage, DC current, resistance and frequency. The power / performance measurement can be performed with this multimeter either directly with the supplied test leads, or indirectly by current clamps.


- Performance
- Power factor
- AC voltage and current
- DC voltage and current, resistance and frequency

- Incl. Software, data cable and Test Leads

 

Manufacturer: PCE Instruments
£ 252.00

Price excl. VAT &. delivery

Order no.: PCE-123

PCE-123 is a multimeter used to test and calibrate a variety of measuring instruments. Offering a high level of accuracy for an affordable price, this easy-to-use multimeter provides electrical (mA, mV, V and frequency in Hz) and temperature (in °C or °F) output signals, making the multimeter useful in a wide range of applications.


- DC current: 4 - 20 mA (1 kΩ load, 24 V loop supply) with 1 μA resolution
- DC voltage: 0 - 100.00 mV, 0 - 1.000 V, 0 - 12.000 V
- K, J, E, T type thermocouples (°C or °F)
- Frequency: 1 - 62,500 Hz

 

Manufacturer: PCE Instruments
£ 340.00

Price excl. VAT &. delivery

Order no.: PCE-GPA 62

Three-Phase Multimeter with network analyzer / power and energy meter with data logger.


- Voltage measurement: 4.0 ... 600.0 V RMS value ± 0,5 %, ± 5 digits / 0,1 V
- Voltage peaks (> 10V): 50 Hz - 60 Hz / ± 5 % ± 50 digits
- Current measurements: 4.0 ... 1500.0 A real ± 1% V. ± 5 digits / 0,01 A
- Current peaks (> 20A):  50 Hz - 60 Hz / ± 5 % ± 50 digits


Manufacturer: PCE Instruments
£ 512.00

Price excl. VAT &. delivery

Order no.: PKT-2700

The PCE-ERT 10 multimeter is a handheld instrument used to quickly and easily determine earth and ground resistance.


- 3 conductors measuring method
- Earth/ground resistance is determined in three different measuring ranges up
  to 2000 Ω
- Measuring earth voltage up to 200 V  

 

£ 110.00

Price excl. VAT &. delivery

Order no.: MX1

Analogue multimeter for outdoors with shock protection and splash proof.

 

Manufacturer: Chauvin Arnoux GmbH
£ 156.00

Price excl. VAT &. delivery

Order no.: METRAmax®3

The Analog Multimeter METRAmax®3 reliably measures current, voltage and resistance. The Analog Multimeter METRAmax®3 has a simple method of operation, particularly useful for training and courses.


- Measurements of AC V and DC V to 600 V
- Measurements of AC A and DC A to 15 A
- Resistance measurements up to 300

 

£ 183.00

Price excl. VAT &. delivery

Order no.: Metrix MX2B

Multimeter Metrix MX2B for almost all kind of outdoor applications with current transformer clamp up to 200 A.

 

Manufacturer: Chauvin Arnoux GmbH
£ 220.00

Price excl. VAT &. delivery