Material Tester for Metals PCE-COM 20
£ 5,229.00
Price excl. VAT &. delivery
2 year Warranty

PCE-COM 20 is a portable handheld non-destructive material tester for non-ferrous metals. This non-destructive testing (NDT) device uses eddy current to determine the electrical conductivity of non-ferrous metals such as aluminum and copper. Includes 3 standards for testing.

 

- Operating frequency: 60 kHz
- Sine wave probe: Ø 14 mm / ≈ 0.55 in 
- Memory: Up to 500 groups of measurements
- Lift-off and temperature compensation
- Automatic calibration

Material Tester for Metals PCE-COM 20-ICA incl. ISO Calibration Certificate
£ 5,367.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration

PCE-COM 20-ICA is a portable handheld non-destructive material tester for non-ferrous metals. This non-destructive testing (NDT) device uses eddy current to determine the electrical conductivity of non-ferrous metals such as aluminum and copper. Includes 3 standards for testing.

 

- Operating frequency: 60 kHz
- Sine wave probe: Ø 14 mm / ≈ 0.55 in 
- Memory: Up to 500 groups of measurements
- Lift-off and temperature compensation
- Automatic calibration
- incl. ISO Calibration Certificate

Material Tester PCE-CPT 20
£ 2,336.00
Price excl. VAT &. delivery
2 year Warranty

PCE-CPT 20 is a Material Tester, or surface coating flexibility testing device, used for testing the formability, ductility, adhesion and elongation of paints, lacquers, varnishes, powder and protective coatings on sheet metal. Used in manufacturing production, paint shop and quality control applications, the Material Tester aids in determining coating strength, durability and elasticity.


- Tests surface coatings on metal sheets 0.3 to 1.25 mm thick
- Provides a maximum depression force of 2500 N
- Offers a display resolution of 0.01 mm

 

Material Tester PCE-CPT 20
£ 2,336.00
Price excl. VAT &. delivery
2 year Warranty

PCE-CPT 20 is a Material Tester, or surface coating flexibility testing device, used for testing the formability, ductility, adhesion and elongation of paints, lacquers, varnishes, powder and protective coatings on sheet metal. Used in manufacturing production, paint shop and quality control applications, the Material Tester aids in determining coating strength, durability and elasticity.


- Tests surface coatings on metal sheets 0.3 to 1.25 mm thick
- Provides a maximum depression force of 2500 N
- Offers a display resolution of 0.01 mm

 

Material Hardness Tester PCE-5000
£ 5,251.00
Price excl. VAT &. delivery
2 year Warranty

PCE-5000 is a portable material hardness tester that uses the ASTM A1038 ultrasonic contact impedance (UCI) method to measure the hardness of metals and alloys with a minimum thickness of 2 mm / .08 in. Non-destructive testing produces microscopic indentation.

- Measurement according to ASTM A1038 ultrasonic contact impedance (UCI) method
- Measurement units: Rockwell A (HRA), Rockwell B (HRB), Rockwell C (HRC), Brinell (HB), Vickers (HV) and MPa (N/mm²) SI units
- Measurement ranges: 61-85.6 HRA, 41-100 HRB, 20.3-68 HRC, 85-650 HB, 50-999 HV, 255-2180 MPa (N/mm²)
- Accuracy: ± 1.5 HR, ± 3% HB, ± 3% HV, Repeatability: ± 0.3%
- Memory size: 1,000 groups for measurement data and 20 groups for calibration data
- Different probe types (also automatic motorized probes) available

Material Tester PCE-XXM 30-ICA incl. ISO Calibration Certificate
£ 703.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The material tester is designed for fast and precise color measurements of surfaces. The color ranges CIE-LAB, CIE-LCh, HunterLab, CIE-Luv, XYZ, RGB of the color can be determined with the material tester.

- Measuring aperture: Ø8 mm / 0.31"
- Wavelength interval: 10 mm / 0.39"
- Wavelength: 400 ... 700 nm
- Battery life for approx. 10,000 measurements
- Bluetooth interface
Requires free app for Android only in Playstore (PCE-XXM 30) to use all features
- Various adjustable light sources
- incl. ISO Calibration Certificate
Material Tester PCE-3000ULS
£ 3,280.00
Price excl. VAT &. delivery
2 year Warranty
The material tester can be used to quickly check the hardness of components even when installed. The material tester impresses with a large measuring range, easy handling, robust design and temperature resistance down to -20°C.

- Measurement according to UCI method and rebound method
- Testing of HRC, HV, HB
- Measuring direction 360 °
- Large LCD
- USB interface
- incl. UCI probe & type D Leebsonde
Material Tester PCE-UCD 100
£ 4,445.00
Price excl. VAT &. delivery
2 year Warranty
The material testing device sets a new standard for quality control of concrete structures. With a wide range of measurement parameters and state-of-the-art technology, this material testing device enables accurate verification of concrete piles, concrete beams, and other components. This innovative material testing device not only provides reliable concrete strength measurements but also detailed error detection, including the size and depth of voids and cracks.

- Measurement range: -1677700 µs to +1677700 µs
- Resolution: 0.05 µs
- Measurement parameters: Concrete strength, error detection, size and depth of voids, cracks
- Includes a camera for measuring crack width
- Bandwidth: 1 to 500 kHz
- Display: 10.1" TFT touchscreen display
- Internal storage: 8 GB
Material Flow Index Tester / Plastometer PCE-MFI 400
£ 6,654.00
Price excl. VAT &. delivery
2 year Warranty
The material flow index tester is used for rapid testing of the melt mass flow rate of plastics. The material flow index tester device is designed for both incoming goods inspection and continuous production monitoring.

- Melting rate: 0.1 to 400.0 g / 10 min
- Heating temperature: 120 ... 400°C / 248 ... 752°F
- Measuring accuracy temperature: ± 0.2°C / 0.36°F
- Resolution: 0.1°C / 0.18°F
- Large 7" TFT touch display
- Already pre-set materials
- Various weights included
- Standards: ISO1133-1997, ASTM 1238-04C, GB / T3682-2000
Material Thickness Meter PCE-FD 20
£ 4,093.00
Price excl. VAT &. delivery
2 year Warranty

PCE-FD 20 is a material thickness meter with a large LCD screen that displays A-scan maps of ultrasonic signals as well as B-scan cross sections. Ideal for use in mechanical engineering, aerospace and metallurgical applications, this high-frequency material thickness meter uses a contact transducer (two different probes included; 45° and 90°) to measure material thickness and identify flaws and defects such as discontinuity in welds.


- Operating frequency range: 1 ... 10 MHz
- Measured time interval range: 6 ... 1000 microseconds (µs)
- Sound velocity: 1000 ... 9999 m/s 

 

Conductivity Tester for Metals PCE-COM 20
£ 5,229.00
Price excl. VAT &. delivery
2 year Warranty

PCE-COM 20 is a portable handheld non-destructive conductivity tester for non-ferrous metals. This non-destructive testing (NDT) device uses eddy current to determine the electrical conductivity of non-ferrous metals such as aluminum and copper. Includes 3 standards for testing.

 

- Operating frequency: 60 kHz
- Sine wave probe: Ø 14 mm / ≈ 0.55 in
- Memory: Up to 500 groups of measurements
- Lift-off and temperature compensation
- Automatic calibration

Material Tester PCE-XXM 30
£ 319.00
Price excl. VAT &. delivery
2 year Warranty
Wireless
The material tester is designed for fast and precise color measurements of surfaces. The color ranges CIE-LAB, CIE-LCh, HunterLab, CIE-Luv, XYZ, RGB of the color can be determined with the material tester.

- Measuring aperture: Ø8 mm / 0.31"
- Wavelength interval: 10 mm / 0.39"
- Wavelength: 400 ... 700 nm
- Battery life for approx. 10,000 measurements
- Bluetooth interface
Requires free app for Android only in Playstore (PCE-XXM 30) to use all features
- Various adjustable light sources
Material Tester PCE-3500 incl. 50N probe
£ 3,369.00
Price excl. VAT &. delivery
2 year Warranty

The Ultrasonic Contact Impedance (UCI) durometer PCE-3500 has been designed for the non-destructive hardness measurement of metallic components. A 136° Vickers diamond at the probe is stimulated with its self-resonance to allow the user to very accurately measure hardness of small items, thin-walled items (>1 mm), and surface-hardened layers. Small imprint after measuring for mirrored surfaces.


- Probe is 50 Newtons / 11.2 lbf force, 10 and 98 N probes are options
- Tests HRC, HRB, HV, HB, MPa
- Memory function via SD card and included PC software
- Large color LCD display with back lighting

 

Material Hardness Tester PCE-5000
£ 5,251.00
Price excl. VAT &. delivery
2 year Warranty

PCE-5000 is a portable material hardness tester that uses the ASTM A1038 ultrasonic contact impedance (UCI) method to measure the hardness of metals and alloys with a minimum thickness of 2 mm / .08 in. Non-destructive testing produces microscopic indentation.

- Measurement according to ASTM A1038 ultrasonic contact impedance (UCI) method
- Measurement units: Rockwell A (HRA), Rockwell B (HRB), Rockwell C (HRC), Brinell (HB), Vickers (HV) and MPa (N/mm²) SI units
- Measurement ranges: 61-85.6 HRA, 41-100 HRB, 20.3-68 HRC, 85-650 HB, 50-999 HV, 255-2180 MPa (N/mm²)
- Accuracy: ± 1.5 HR, ± 3% HB, ± 3% HV, Repeatability: ± 0.3%
- Memory size: 1,000 groups for measurement data and 20 groups for calibration data
- Different probe types (also automatic motorized probes) available

Material Tester PCE-3500-10 incl. 10N probe
£ 3,369.00
Price excl. VAT &. delivery
2 year Warranty

The Ultrasonic Contact Impedance (UCI) durometer PCE-3500 has been designed for the non-destructive hardness measurement of metallic components. A 136° Vickers diamond at the probe is stimulated with its self-resonance to allow the user to very accurately measure hardness of small items, thin-walled items (>1 mm), and surface-hardened layers. Small imprint after measuring for mirrored surfaces and nitrided surfaces.


- Probe is 10 Newtons / 2.2 lbf force, 50 and 98 N probes are options
- Tests HRC, HRB, HV, HB, MPa
- Memory function via SD card and included PC software
- Large color LCD display with back lighting


Material Tester PCE-3500-98 incl. 98N probe
£ 3,369.00
Price excl. VAT &. delivery
2 year Warranty

The Ultrasonic Contact Impedance (UCI) durometer PCE-3500 has been designed for the non-destructive hardness measurement of metallic components. A 136° Vickers diamond at the probe is stimulated with its self-resonance to allow the user to very accurately measure hardness of small items, thin-walled items (>1 mm), and surface-hardened layers. Small imprint after measuring for mirrored surfaces and nitrided surfaces.


- Probe is 98 Newtons / 22 lbf force, 10 and 50 N probes are options
- Tests HRC, HRB, HV, HB, MPa
- Memory function via SD card and included PC software
- Large color LCD display with back lighting


Material Tester PCE-RT 2300
£ 2,070.00
Price excl. VAT &. delivery
2 year Warranty
The material tester PCE-RT 2300 is used to measure the roughness of surfaces. The PCE-RT 2300 material tester has a detachable motorized drive unit that allows the material tester to determine the surface roughness even on curved surfaces, grooves, and complex profiles. Free software download for remote test control and data save to Windows PC and memory for 100 records of internal data.

- Large measuring range:  Rz: 0.02 μm ... 320 μm; Ra, Rq: 0.005 μm ... 32 μm
- Accuracy of ± 10% and repeat accuracy of ± 6%
- Touchscreen configuration and Android/printer bluetooth connectivity 
- Sensor has diamond test head with 90-degree cone angle
- Optional sensors and extension rod for small holes and curved surfaces 
Ultrasonic Thickness Tester PCE-FD 20
£ 4,093.00
Price excl. VAT &. delivery
2 year Warranty

PCE-FD 20 is a portable ultrasonic thickness tester or ultrasonic thickness gauge with a large LCD screen that displays A-scan maps of ultrasonic signals as well as B-scan cross sections. Ideal for use in mechanical engineering, aerospace and metallurgical applications, this high-frequency ultrasound-based thickness meter uses a contact transducer (two different probes included; 45° and 90°) to measure material thickness and identify flaws and defects such as discontinuity in welds.


- Operating frequency range: 1 ... 10 MHz
- Measured time interval range: 6 ... 1000 microseconds (µs)
- Sound velocity: 1000 ... 9999 m/s