Order no.: PCE-CT 29

Material Tester PCE-CT 29

£ 345.00
£ 414.00
:
4250348729910
PCE-CT 29
price ex. (VAT / delivery)
Delivery time: 1-2 working days

Description

Material tester with a measuring range of 0 ... 2000 µm / Micro-USB /
statistics function / limit value alarm function / temperature and moisture measurement / V-groove 
Software for transferring the measured values / optionally with ISO calibration certificate 

The Material tester has a measuring range of 0 ... 2000 µm. The Material tester can measure the coating thickness on ferrous (Fe) and non-ferrous (NFe) metals. For a better analysis of the measurements, the coating thickness gauge has a measuring function based on the SSPC standards. With this function, the corrosion protection of a coating can be checked with the Material tester.

The Group function stores the measured values directly on the Material tester. A memory of 50 groups with 50 measurements each is available on the Material tester. In each group, statistics are created for all measured values from the Material tester. All measurement data and statistics can be recalled after a measurement run on the Material tester.

For further analysis of the measured values, the Material tester can be connected to a PC. The Material tester has a micro-USB interface for this purpose. The software can be used to transfer the measurement data from the Material tester to a PC. In addition, it is possible to carry out live measurements with the Material tester using the software. For further processing of the measured values from the Material tester, they can be exported in CSV and XLS format via the software. 

In addition to the coating thickness measurement, the Material tester can measure the temperature and humidity of the environment. Thus, the Material tester can be used to find out whether the climatic conditions are right to carry out further processing on the coating. 

With the V-groove, the coating thickness of, for example, pipes can also be determined with the Material tester. Optionally, the Material tester can be equipped with an ISO calibration certificate.

Highlights

- Measuring range 0 ... 2000 µm
- with SSPC measuring function 
- Individually adjustable limit value alarms  
- Data memory with up to 2500 measured values
- temperature and humidity measuring function 
- optionally with ISO calibration certificate

Specification

   
Measurement on ferrous metal (Fe)
Measuring range 0 ... 2000 µm
Resolution 0.1 µm @ 0.0 ... 99.9 µm
  1 µm @ 100 ... 2000 µm
Accuracy ±(2 % ±2 µm of Mw.)
Repeatability ±(1 % ±1 µm of Mw.)
Smallest radius of curvature 1.5 mm
Smallest measuring area Ø7 mm
Smallest layer thickness 0.5 mm
   
Measurement on non-ferrous metal (NFe)
Measuring range 0 ... 2000 µm
Resolution 0.1 µm @ 0.0 ... 99.9 µm
  1 µm @ 100 ... 2000 µm
Accuracy ±(2 % ±2 µm of Mw.)
Repeatability ±(1 % ±1 µm of Mw.)
Smallest radius of curvature 3 mm
Smallest measuring area  Ø5 mm
Smallest layer thickness 0.3 mm
   
Temperature  
Measuring range 0 ... 50 °C / 32 ... 122 °F
Resolution 0.1 °C / °F
Accuracy ±1.2 °C / ±2.2°F
   
Humidity  
Measuring range 0 ... 100 % r. h.
Resolution 0.1 % r. h.
Accuracy ±3.2 % r. h. @ 20.0 ... 70.0 % r. h.
  ±4.0 % r. h. @ 0.0 ... 19.9 % r. h.
  ±4.0 % r. h. @ 70.1 ... 100.0 % r. h.
   
Further specifications  
Base material for measurements Ferrous (Fe) and non-ferrous (NFe) metals
Display 2.4 " LC display
Automatic display orientation 0, 90, 180 and 270 °, can be switched off
  (only measuring window)
Statistic functions average, highest, lowest and SDEV measured value
Measuring modes direct, groups, SSPC
Units µm, mm, mils, inch
Power supply 2 x 1.5 V AA batteries
Interface Micro-USB (for data transfer only)
Alarm signal tone and / or LED signal light in case of
  Exceeding of the adjustable upper and lower alarm limit
Switch-off Off, 30 seconds, 1 minute, 5 minutes
Menu languages English, German, French, Spanish,
  Italian, Portuguese, Chinese, Japanese
Operating conditions 0 ... 50 °C, 20 ... 90 % r.h., non-condensing
Storage conditions -10 ... +60 °C, 20 ... 90 % r.h., non-condensing
Dimensions  35 x 64 x 137 mm
Weight  175 g
   

Delivery Scope

1 x Material thickness gauge PCE-CT 29
1 x set of standard foils
1 x carrying case,
1 x calibration plates (Fe and NFe)
1 x mass data storage
2 x 1.5 V AA battery, 
1 x instruction manual