HVAC Meter PCE-PIC 60
£ 11,208.00
Price excl. VAT &. delivery
2 year Warranty
The HVAC meter PCE-PIC 60 is used to inspect channels and pipes. The HVAC meter has a fiber optic push cable of 60 m. At the end of the HVAC meter, a motorized camera head is mounted. This camera head is able to be moved 360° horizontally and 180° vertically.

- Camera head diameter : 60 mm / 2.4 in
- Cable length: 60 m / 196.9 ft
- Pipe diameter to & from: 80 ... 1200 mm / 3.1 ... 47.2 in
- Field of view: 20 ... 100 cm
- SD card up to 256 GB
- ø9.5 mm fiber optic cable
- Motorized camera
- With cable trolley
Videoscope PCE-PIC 60
£ 11,208.00
Price excl. VAT &. delivery
2 year Warranty
The videoscope PCE-PIC 60 is used to inspect channels and pipes. The videoscope has a fiber optic push cable of 60 m. At the end of the videoscope, a motorized camera head is mounted. This camera head is able to be moved 360° horizontally and 180° vertically.

- Camera head diameter : 60 mm / 2.4 in
- Cable length: 60 m / 196.9 ft
- Pipe diameter to & from: 80 ... 1200 mm / 3.1 ... 47.2 in
- Field of view: 20 ... 100 cm
- SD card up to 256 GB
- ø9.5 mm fiber optic cable
- Motorized camera
- With cable cars
Drain Camera PCE-PIC 60
£ 11,208.00
Price excl. VAT &. delivery
2 year Warranty
The drain camera PCE-PIC 60 is used to inspect channels and pipes. The drain camera has a fiber optic push cable of 60 m. At the end of the drain camera, a motorized camera head is mounted. This camera head is able to be moved 360° horizontally and 180° vertically.

- Camera head diameter : 60 mm / 2.4 in
- Cable length: 60 m / 196.9 ft
- Pipe diameter to & from: 80 ... 1200 mm / 3.1 ... 47.2 in
- Field of view: 20 ... 100 cm
- SD card up to 256 GB
- ø9.5 mm fiber optic cable
- Motorized camera
- With cable trolley
Chimney Camera PCE-PIC 60
£ 11,208.00
Price excl. VAT &. delivery
2 year Warranty
The chimney camera PCE-PIC 60 is used to inspect channels and pipes. The chimney camera has a fiber optic push cable of 60 m. At the end of the chimney camera, a motorized camera head is mounted. This camera head is able to be moved 360° horizontally and 180° vertically.

- Camera head diameter : 60 mm / 2.4 in
- Cable length: 60 m / 196.9 ft
- Pipe diameter to & from: 80 ... 1200 mm / 3.1 ... 47.2 in
- Field of view: 20 ... 100 cm
- SD card up to 256 GB
- ø9.5 mm fiber optic cable
- Motorized camera
- With cable trolley
Industrial Borescope PCE-PIC 60
£ 11,208.00
Price excl. VAT &. delivery
2 year Warranty
The industrial borescope PCE-PIC 60 is used to inspect channels and pipes. The industrial borescope has a fiber optic push cable of 60 m. At the end of the industrial borescope, a motorized camera head is mounted. This camera head is able to be moved 360° horizontally and 180° vertically.

- Camera head diameter : 60 mm / 2.4 in
- Cable length: 60 m / 196.9 ft
- Pipe diameter to & from: 80 ... 1200 mm / 3.1 ... 47.2 in
- Field of view: 20 ... 100 cm
- SD card up to 256 GB
- ø9.5 mm fiber optic cable
- Motorized camera
- With cable trolley
Snake Camera PCE-PIC 60
£ 11,208.00
Price excl. VAT &. delivery
2 year Warranty
The snake camera is used to inspect channels and pipes. The snake camera has a fiber optic push cable of 60 m. At the end of the snake camera, a motorized camera head is mounted. This camera head is able to be moved 360° horizontally and 180° vertically.

- Camera head diameter : 60 mm / 2.4 in
- Cable length: 60 m / 196.9 ft
- Pipe diameter to & from: 80 ... 1200 mm / 3.1 ... 47.2 in
- Field of view: 20 ... 100 cm
- SD card up to 256 GB
- ø9.5 mm fiber optic cable
- Motorized camera
- With cable cars
Condition Monitoring Inspection Camera PCE-PIC 60
£ 11,208.00
Price excl. VAT &. delivery
2 year Warranty
The condition monitoring inspection camera PCE-PIC 60 is used to inspect channels and pipes. The condition monitoring inspection camera has a fiber optic push cable of 60 m. At the end of the condition monitoring inspection camera, a motorized camera head is mounted. This camera head is able to be moved 360° horizontally and 180° vertically.

- Camera head diameter : 60 mm / 2.4 in
- Cable length: 60 m / 196.9 ft
- Pipe diameter to & from: 80 ... 1200 mm / 3.1 ... 47.2 in
- Field of view: 20 ... 100 cm
- SD card up to 256 GB
- ø9.5 mm fiber optic cable
- Motorized camera
- With cable trolley
Drain Inspection Camera PCE-PIC 60
£ 11,208.00
Price excl. VAT &. delivery
2 year Warranty
The inspection camera PCE-PIC 60 is used to inspect channels and pipes. The inspection camera has a fiber optic push cable of 60 m. At the end of the inspection camera, a motorized camera head is mounted. This camera head is able to be moved 360° horizontally and 180° vertically.

- Camera head diameter : 60 mm / 2.4 in
- Cable length: 60 m / 196.9 ft
- Pipe diameter to & from: 80 ... 1200 mm / 3.1 ... 47.2 in
- Field of view: 20 ... 100 cm
- SD card up to 256 GB
- ø9.5 mm fiber optic cable
- Motorized camera
- With cable trolley
NDT Tester Inspection Camera PCE-PIC 60
£ 11,208.00
Price excl. VAT &. delivery
2 year Warranty
The NDT tester inspection camera PCE-PIC 60 is used to inspect channels and pipes. The NDT tester inspection camera has a fiber optic push cable of 60 m. At the end of the NDT tester inspection camera, a motorized camera head is mounted. This camera head is able to be moved 360° horizontally and 180° vertically.

- Camera head diameter : 60 mm / 2.4 in
- Cable length: 60 m / 196.9 ft
- Pipe diameter to & from: 80 ... 1200 mm / 3.1 ... 47.2 in
- Field of view: 20 ... 100 cm
- SD card up to 256 GB
- ø9.5 mm fiber optic cable
- Motorized camera
- With cable trolley
Gloss Meter PCE-SGM 60
£ 1,136.00
Price excl. VAT &. delivery
2 year Warranty

The PCE-SGM 60 gloss meter with small measuring area is used on many types of surfaces to quantify their gloss units. This gloss-measuring device operates on the reflection principle by sending light from a calibrated light source onto the surface to be tested and then calculates the gloss level of the surface according to the reflection of light particles. This gloss meter allows you to measure very high gloss surfaces above 70 gloss units (GU).


- Measurement geometry: 60° degree angle
- Measurement up to 1000 gloss units
- Internal reading memory up to 5000 readings
- 3.5" TFT display
- Light source: D65
- Wave length: 400-700 nm

 

Gloss Meter PCE-IGM 60
£ 1,136.00
Price excl. VAT &. delivery
2 year Warranty

The gloss meter PCE-IGM 60 is an optical measuring instrument with a measuring geometry of 60°. The surface is analyzed by the gloss meter and then the result is shown. Every surface has the characteristic to reflect light.


- Measurement geometry: 60° degree angle
- Measuring range: 0 ... 300 GU
- Standards: ISO 2813 / GB/T 9754 / ASTM D 523 / ASTM D 2457
- Light source: D65
- Wave length: 400-700 nm

 

NDT Tester - Gloss Meter PCE-IGM 60
£ 1,136.00
Price excl. VAT &. delivery
2 year Warranty

The NDT tester or gloss meter PCE-IGM 60 is an optical measuring instrument with a measuring geometry of 60°. The surface is analyzed by the gloss meter and then the result is shown. Every surface has the characteristic to reflect light.


- Measurement geometry: 60° degree angle
- Measuring range: 0 ... 300 GU
- Standards: ISO 2813 / GB/T 9754 / ASTM D 523 / ASTM D 2457
- Light source: D65
- Wave length: 400-700 nm

 

Surface Testing - Gloss Meter PCE-SGM 60
£ 1,136.00
Price excl. VAT &. delivery
2 year Warranty

The PCE-SGM 60 surface tester and gloss meter with small measuring area is used on many types of surfaces to quantify their gloss units. This gloss-measuring device operates on the reflection principle by sending light from a calibrated light source onto the surface to be tested and then calculates the gloss level of the surface according to the reflection of light particles. This meter allows you to measure very high gloss surfaces above 70 gloss units (GU).


- Measurement geometry: 60° degree angle
- Measurement up to 1000 gloss units
- Internal reading memory up to 5000 readings
- 3.5" TFT display
- Light source: D65
- Wave length: 400-700 nm

 

Surface Testing - Gloss Meter PCE-IGM 60
£ 1,136.00
Price excl. VAT &. delivery
2 year Warranty

The gloss meter PCE-IGM 60 is an optical measuring instrument with a measuring geometry of 60°. The surface is analyzed by the gloss meter and then the result is shown. Every surface has the characteristic to reflect light.


- Measurement geometry: 60° degree angle
- Measuring range: 0 ... 1000 GU
- Standards: ISO 2813 / GB/T 9754 / ASTM D 523 / ASTM D 2457
- Light source: D65
- Wave length: 400-700 nm
 

 

Panel Meter PCE-DMM 60
£ 872.00
Price excl. VAT &. delivery
2 year Warranty

The panel meter is a precision instrument of the highest standards. The panel meter is specifically designed for process monitoring and calibration. This panel meter is distinguished by its modular concept. This means that the actual sensor and the display can be separated. The pressure transmitter can be selected on site for different measuring ranges and connected to the display without tools.


- Max. 400 bar / 5801 psi
- Media: water, gases
- Pressure type: Absolute / Relative
- Diaphragm: stainless steel
- Accuracy: 0.05

Gloss Meter PCE-SGM 60-ICA incl. ISO calibration certificate
£ 1,260.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration

The PCE-SGM 60 gloss meter with small measuring area is used on many types of surfaces to quantify their gloss units. This gloss-measuring device operates on the reflection principle by sending light from a calibrated light source onto the surface to be tested and then calculates the gloss level of the surface according to the reflection of light particles. This gloss meter allows you to measure very high gloss surfaces above 70 gloss units (GU).


- Measurement geometry: 60° degree angle
- Measurement up to 1000 gloss units
- Internal reading memory up to 5000 readings
- 3.5" TFT display
- Light source: D65
- Wave length: 400-700 nm
- Incl. ISO calibration certificate

Gloss Meter PCE-IGM 60 ICA incl. ISO calibration certificate
£ 1,255.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration

The gloss meter PCE-IGM 60 is an optical measuring instrument with a measuring geometry of 60 °. The surface is analyzed by the gloss meter and then the result is shown. Every surface has the characteristic to reflect light.


- Measurement geometry: 60° degree angle
- Measuring range: 0 ... 300 GU
- Standards: ISO 2813 / GB/T 9754 / ASTM D 523 / ASTM D 2457
- Light source: D65
- Wave length: 400-700 nm
- Incl. ISO calibration certificate

HVAC Meter PCE-VE 1500-22190
£ 20,670.00
Price excl. VAT &. delivery
2 year Warranty
Wireless
With this HVAC meter, weld seams, wear and tear and damage can be assessed quickly and easily in order to make quick diagnoses. The sheathing of the endoscope cable from the HVAC meter consists of braided tungsten.

- Diameter: Ø2.2mm / 0.08"
- Cable length: 1m / 3.2 ft
- Camera direction: 90°
- Resolution: 160,000 pixels
- Focusing range: 5 ... 50 mm / 0.19 ... 1.96"
- 7" touch screen for easy operation
- replaceable battery with status display
- Storage of recording on SD card
- Motor with endoscope cable can be changed quickly
- HDMI connection for direct image transmission