PCE-TDS 100HS Handheld Ultrasonic Flow HVACR Meter
Measures liquid flow velocity in pipes and tubes with a diameter of 20 … 108 mm / ≈ 3/4 ... 4 in
v = measured velocity
T1 = run time of the ultrasonic signal in the flow direction
T2 = run time of the ultrasonic signal against the flow direction
L = length of the ultrasonic wave
α = ultrasonic signal angle to the flow
The transit-time principle requires pipes to be full and have no bubbles and no particles.
Note: To transfer data to a computer, SOFT-PCE-TDS software is required. This software is sold separately - see accessories for details.
Each PCE-TDS series meter is assembled and calibrated by PCE Instruments in Germany. Therefore, a factory calibration certificate is provided by PCE Germany in the delivery contents of the meter. The certificate includes one measuring point on two different pipes. The reference display of the in-house test stand used by PCE for calibration has a valid DAkkS calibration certificate. This ensures traceability to the Physikalisch-Technische Bundesanstal (PTB) German national standard. Please note that because the meter's measured values depend upon the pipe geometry, material and coating; the medium type, temperature and speed; and the sensor type and measuring method, these parameters are listed on the supplied certificate for maximum traceability.
Handheld measuring range | -32 ... +32 m/s, -105 ... 105 ft/s |
Resolution | 0.0001 m/s, 0.00033 ft/s |
Accuracy for DN ≥ 50 mm: for DN < 50 mm: |
± 3.5% of measured value ± 1.0% of measured value |
Reproducibility | ± 1.0% of measured value |
Media |
All liquids with an impurity <5% and a flow >0.03 m³/h
|
Flow units |
Cubic meter [m³]
|
Time settings |
Per day [/d]
|
Data logger | 1800 measurements |
Interface | USB (for online measurement and reading of the internal memory) |
Protection | IP 52 |
Power supply | 3 x AA NiMH rechargeable battery / 2100-mAh (at full charge 12h running time) 100 … 240V AC 50/60 Hz |
Dimensions | 214 x 104 x 40 mm / 8.4 x 4.1 x 1.5 in |
Weight | 450 g / 15 oz |
Sensor (only PCE-TDS 100 HS) | Nominal width DN 15 … 100, 20 … 108 mm / approx. 3/4 ... 4" |
Temperature of liquid | -30 … 160°C / -22 ... 320°F |
Dimensions | 45 x 30 x 30 mm / 1.7 x 1.1 x 1.1 in |
Weight | 75 g / < 1 lb |
ISO calibration certificate for the flow meter, certifies traceability to test standards and is required to comply with ISO 9000 requirements.
- 2 different pipe diameters, each 1x speed
- New meters come ISO calibrated so this certificate is not required for new meters
The calibration certificate is issued especially for the customer and therefore is exempt from the right of return.
Price excl. VAT &. delivery
2 year Warranty
Price excl. VAT &. delivery
2 year Warranty
TDS-HS bracket and sliding transducers S1 with integrated magnets for attaching to ferrous pipes
- For pipe and tube diameters of DN 15 … 100, 20 … 108 mm / approx. 3/4 ... 4"
- Dimensions 200 x 25 x 25 mm / 7.9 x 1 x 1 in
Price excl. VAT &. delivery
2 year Warranty
Price excl. VAT &. delivery
2 year Warranty
Price excl. VAT &. delivery
2 year Warranty
Price excl. VAT &. delivery
2 year Warranty
Price excl. VAT &. delivery
2 year Warranty
Price excl. VAT &. delivery
2 year Warranty
The pressure gauge PCE-DMM 70 is a precision instrument for leakage testing. The pressure gauge is specifically designed for leak testing of pipe networks. The actual pressure gauge and the display of this precision instrument can be separated without tools. The measurement values are stored in the internal memory.
- Max. 400 bar / 5801 psi
- For leakage testing
- Media: water, gases
- Pressure type: Absolute / Relative
- Membrane: Stainless Steel
- Accuracy class: 0.05
Price excl. VAT &. delivery
2 year Warranty
The pressure gauge PCE-DMM 60 is a precision instrument of the highest standards. The pressure gauge is specifically designed for process monitoring and calibration. This pressure gauge is distinguished by its modular concept. This means that the actual sensor and the display can be separated. The pressure transmitter can be selected on site for different measuring ranges and connected to the display without tools.
- Max. 400 bar / 5801 psi
- Media: water, gases
- Pressure type: Absolute / Relative
- Diaphragm: stainless steel
- Accuracy: 0.05
Price excl. VAT &. delivery
2 year Warranty
The pressure gauge PCE-DMM 51 is suitable for flush mounting hygiene. Thus, the gauge can be installed both in the food industry as well as in medical technology. The pressure gauge shows on its rotatable display pressures up to 400 bar, relative or absolute. The operating fluid of the pressure gauge has a food safe FDA approval.
- Max. 400 bar / 5801 psi
- Rotating display
- For hygienic applications
- Media: water, paints and coatings, gases, viscous and paste media
- Pressure: relative
- Diaphragm: stainless steel flush
- Accuracy class: 0.2
Price excl. VAT &. delivery
2 year Warranty
The pressure gauge PCE-DMM 50 is suitable for stationary and mobile pressure measurement. The pressure gauge PCE-DMM 50 is used in mechanical and plant engineering, laboratory technology and environmental technology. This pressure gauge is battery powered. The measuring range of the pressure gauge reaches up to 600 bar.
- Max. 600 bar / 8702 psi
- Rotating display
- For hygienic applications
- Media: water, oxygen, fuels and oils
- Print: absolute or relative (user selectable)
- Diaphragm: Ceramics
- Accuracy class: 0.2
Price excl. VAT &. delivery
2 year Warranty
The pressure gauge PCE-DMM 21 is suitable for flush sanitary installation. The pressure gauge may represent on its rotatable display pressures up to 40 bar, absolute or relative. The filling of the pressure gauge has a food safe FDA approval. The flush mounting of the pressure gauge can be sterilized.
- To 40 bar / 580 psi
- Relative and absolute pressure measurement
- Max-min function with reset
- 2-line backlit display
Price excl. VAT &. delivery
2 year Warranty
The Pressure Gauge PCE-DMM 20 has a two-line display. The pressure gauge can represent pressures up to 600 bar, relative or absolute. The parts of the gauge PCE-DMM 20 that come in contact with liquids are made of stainless steel.
- Max. 600 bar / 8702 psi
- Rotating display
- Battery operation
- Media: gas, water, fuels and oils
- Print: absolute or relative (user selectable)
- Diaphragm: stainless steel
- Accuracy class: 0.1
Price excl. VAT &. delivery
2 year Warranty
The pressure gauge PCE-DMM 11 is distinguished by the long battery life of 1800h. The rotatable housing and display completes the functionality of the pressure gauge. Thus, the pressure gauge PCE-DMM 11 is ideal for mobile applications, such as test beds.
- Up to 600 bar / 8702 psi
- Relative pressure
- Revolving 4.5 digit display
- Max-Min function
- Different units
Price excl. VAT &. delivery
2 year Warranty
The compact pressure gauge PCE-DMM 10 is characterized by its rotatable housing and the display and the battery supply. Thus, the pressure gauge PCE-DMM 10 is ideal for mobile applications, such as test beds.
- Max. 250 bar / 3626 psi
- Rotatable 4.5 digit display
- Battery operation
- Media: gases, fuels and oils
- Pressure: relative
- Diaphragm: Ceramic
- Accuracy class: 0.5
Price excl. VAT &. delivery
2 year Warranty