HVAC Meter PCE-LCT 3-ICA incl. ISO Calibration Certificate

Order no.: PCE-LCT 3-ICA
ISO Calibration
£ 266.00
£ 319.20
PCE-LCT 3-ICA
price ex. (VAT / delivery)
Delivery time: 10 - 14 days
HVAC meter for determining the leakage current / Temperature measurement with thermocouple / Inductive current measurement up to 150 A AC / Current probe opening 30 mm / Many measuring functions / incl. ISO Calibration Certificate

The HVAC meter is the ideal measuring instrument to measure leakage currents. This is made possible by the extensive measuring range of the multimeter. Also, current measurements up to 150 A AC can be made with the multimeter. To test supply lines with a current of up to 150 A, the multimeter for the corresponding cable cross-section can be opened up to 30 mm.

In addition to the current measurement, the multimeter can also measure voltages up to 600V directly. Because of the current and voltage measurement, the multimeter is the perfect measuring instrument to carry out measurements and analyzes on, for example, three-phase networks. For example, the continuity test can be used to find an incorrect wiring in sub-distribution boxes.

- 30 mm current clamp opening
- Temperature measurement with thermocouple type K
- Current measurement up to 150 A AC
- Covers a wide range of measurements
- Voltage measurement up to 600V AC / DC RMS
- Transport bag for mobile use
- incl. ISO Calibration Certificate
Measuring function
 
AC current 
Measuring rangeResolutionAccuracyAccuracy
4 mA0.001 mA±(2% + 10 digits)±(3% + 5 digits)
40 mA0.01 mA±(2% + 10 digits)±(3% + 5 digits)
400 mA0.1 mA±(2% + 5 digits)±(3% + 3 digits)
4 A0.001 A±(2% + 5 digits)±(3% + 3 digits)
40 A0.01 A±(2% + 10 digits)±(3% + 5 digits)
150 A0.1 A±(2% + 10 digits)±(3% + 5 digits)
    
Frequency range: 40 Hz ... 1 kHz (sine wave)
Maximum input current: 150 A AC
    
Measuring function 
DC voltage 
Measuring rangeResolutionAccuracy
4 V0.001 V±(0.5% + 4 digits)
40 V0.01 V 
400 V0.1 V 
600 V1 V 
   
Input impedance: 10 MΩ
Maximum input voltage: 600 V AC/DC RMS
   
Measuring function 
AC voltage 
Measuring rangeResolutionAccuracy
4 V0.001 V
±(1% + 3 digits)
40 V0.01 V 
400 V0.1 V 
600 V1 V 
   
Input impedance: 10 MΩ
Maximum input voltage: 600 V AC/DC RMS
Frequency range: 40 Hz ... 1 kHz (sine wave)
   
Measuring function 
Resistance 
Measuring rangeResolutionAccuracy
400 Ω0.1 Ω±(0.8% + 3 digits)
4 kΩ0.001 kΩ 
40 kΩ0.01 kΩ 
400 kΩ0.1 kΩ 
4 MΩ0.001 MΩ 
40 MΩ0.01 MΩ±(1% + 3 digits)
   
Measuring voltage in open circuit: ca. 0.4 V
Overvoltage protection: 600 V AC/DC RMS
   
Measuring function 
Continuity test 
Measuring rangeResolutionAccuracy
Beep at <40 Ω0.1Ω-
   
Overvoltage protection: 600 V AC/DC RMS
   
Measuring function 
Temperature 
Measuring rangeResolutionAccuracy
-20 ... 0 °C1 °C±(3% + 5 digits)
-4 ... 32 °F1 °F 
-0 ... 400 °C1 °C±(1.5% + 5 digits)
32 ... 757 °F1 °F 
400 ... 1000 °C1 °C±(3% + 5 digits)
752 ... 1832 °F1 °F 
   
Overvoltage protection: 600 V AC/DC RMS
The temperature accuracies do not include the accuracies of the temperature sensors
   
Measuring function 
Capacity 
Measuring rangeResolutionAccuracy
40.00 nF0.01 nF±(3% + 8 digits)
400.0 nF0.1 nF 
4.000 µF0.001 µF 
40.00 µF0.01 µF 
400.0 µF0.1 µF 
4.000 mF0.001 µF 
40.00 mF0.01 µF 
   
Overvoltage protection: 600 V AC/DC RMS
   
Measuring function 
Diode test 
Measuring rangeResolutionAccuracy
3.2 V0.001 V-
   
Overvoltage protection: 600 V AC/DC RMS
Test voltage: 3.2 V
Forward current: 1 mA
The accuracies refer to the following ambient conditions: 23 ± 5 °C / 9°F and <75 % r.H
  
General specifications 
Maximum current clamp opening30 mm / 1.18"
Automatic shutdownafter 30 minutes, can be deactivated
Power supply2 x 1.5V AAA battery
Measuring rate3 measurements per second
Display with overvoltage"OL"
Maximum display4000
DisplayLC display
Maximum working height2000 m / 13,123 ft
Temperature coefficient0.1 x accuracy x °C*
Operating conditions18 ... 28 °C / 64 ... 82 °F
Storage conditions-10 ... 50 °C / 14 ... 122 °F
Dimensions213 x 62 x 38 mm / 8.4 x 2.4 x 1.5"
Weightca. 238 g / 8.4 oz with batteries
  
*The temperature is the difference between the temperature of the operating conditions and the current ambient temperature.
 
Example:
Is the current ambient temperature greater than the temperature of the operating conditions
(50°C / 122°F (current ambient temperature)) - (40°C 104°F (operating temperature)) = 10°C / 50°F
Is the current ambient temperature less than the temperature of the operating conditions
(0°C / 32°F (operating temperature)) - (-5°C / 23°F (current ambient temperature)) = 5°C / 41°F

1 x HVAC meter PCE-LCT 3
1 x Transport bag
1 x Thermocouple type K
1 x Pair of test leads
2 x 1.5V AAA batteries
1 x User manual
1 x ISO Calibration Certificate

N.B. Calibration certificates are issued specifically for the customer and are excluded from the right of return.