The PCE-IR10 HVAC infrared thermometer is made up of a small sensor head and a separate electrical component. The HVAC infrared thermometer sensor is so small that it can fit in almost any space. part from this, the device offers similar specifications as other devices. The electrical component of the PCE-IR10 facilitates the use of functions hat are not normally found in a device of this quality. Among these are adjustable emissivity, minimum, maximum and average value, as well as software to program the device via a computer or directly from the unit's LCD. Due to its small size, this temperature tester is ideal for different systems in a production line. The device is accurate, easy to install and economical.
Measuring temperature with the PCE-IR10 HVAC non-contact temperature tester is an economical alternative to similar contact devices (additional information about the functioning principle of measuring temperature with Pyrometers). Also, look at this brief text about the practice of measuring temperature with infrared devices.
To get the highest precision from this device, the user can adjust the emissivity, which is different for each type of surface material being measured. If the user measures a material which is not in the table, they can establish the emissivity value and adjust the temperature measured by the temperature reader.
4 ... 20-mA, 0 ... 20-mA,
|Inputs||Emissivity, temperature compensation, trigger (by software)|
|Cable length||1 m / 3.3 ft, other lengths can be ordered separately|
|Power||8 ... 36V DC|
|Ingress protection||IP65 (NEMA-4)|
| Operating temperature|
for Sensor head
|-20 ... 180°C / -4 ... 356°F|
|Storage conditions||-40 ... 85°C / -40 ... 185°F|
|Operating relative humidity||10 ... 95% without condensation|
|EMI||IEC 801-3, level 3 (maximum cable length of 3m)|
|Sensor head||40 g / .09 lb|
|Electronic component||420 g / < 1 lb|
|Temperature range||40 ... 600°C / 104 ... 1112°F|
|Spectral range||8.0 ... 14 µm|
|Optical resolution 1||15:1|
|Accuracy 2||± 1% or ± 1°C3 / 1.8°F3|
|Repeatablility||± 0.5% or ± 0.5°C3 / 0.9°F3|
|Temperature coefficient||± 0.05°C / 0.09°F, °C / °F or ± 0.05% / °C3 °F3|
|Temperature resolution||0.1°C5 / 1.8°F5|
|Response time||150 ms (95%)|
|Emissivity||0.100 - 1.000 adjustable in digital mode, by units of 0.001|
|Functions||Maximum, minimum Hold and average value|
| 1 90% of energy|
2 at an operating temperature of 23°C / 73°F, ± 5°C / 9°F
3 shighest value is considered correct
4 ISO calibration certificate based on the NIST / DKD measurement
5 for a temperature margin of 300K
1 x ISO Calibration Certificate
Calibration certificates are issued specifically for the customer and are excluded from the right of return.