Gasflag 1-Channel Gas Detector

Single-Gas Gas Leak Detector warning for gases (for Carbon Dioxide CO₂), / without display / with signal output for sensors in combination with a stationary equipment to detect gases (with ATEX approval).

- Stationary
- For Carbon Dioxide CO₂
- Additional display and alarm station
- ATEX approved

The TXgard-IS+O2 is a single-gas Gassensor used to warn for gases (Oxygen, O₂, 0 ... 25 vol%), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For (Oxygen, O₂, 0 ... 25 vol%)
- Additional display and alarm station
- ATEX or UL approval

The Xgard-1-O2 is a single-gas Gassensor used to warn for gases (Oxygen, O₂, 0 ... 25 vol%), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For (Oxygen, O₂, 0 ... 25 vol%)
- Additional display and alarm station
- ATEX or UL approval

The Xgard-IR-3 is a single-gas Gas Leak Detector used to warn for gases (Inflammable Gases, 0 ... 100 % LEL), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For Inflammable Gases, 0 ... 100 % LEL)
- Additional display and alarm station
- ATEX or UL approval

The Xgard-IR-2 is a single-gas Gas Leak Detector used to warn for gases (Carbon Dioxide, CO₂, 0 ... 2 %), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For (Carbon Dioxide, CO₂, 0 ... 5 %)
- Additional display and alarm station
- ATEX or UL approval

The Xgard-IR-1 is a single-gas Gas Leak Detector used to warn for gases (Carbon Dioxide, CO₂, 0 ... 5 %), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For (Carbon Dioxide, CO₂, 0 ... 5 %)
- Additional display and alarm station
- ATEX or UL approval

The Xgard-1-SO2 is a single-gas Gas Leak Detector used to warn for gases (Sulfur Dioxide, SO₂, 0 ... 10 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For (Sulfur Dioxide, SO₂, 0 ... 10 ppm)
- Additional display and alarm station
- ATEX or UL approval

The Xgard-1-PH3 is a single-gas Gas Leak Detector used to warn for gases (Phosphine, PH₃, 0 ... 1 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For (Phosphine, PH₃, 0 ... 1 ppm)
- Additional display and alarm station
- ATEX or UL approval

The Xgard-1-O3 is a single-gas Gas Leak Detector used to warn for gases (Ozone, O₃, 0 ... 1 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For (Ozone, O₃, 0 ... 1 ppm)
- Additional display and alarm station
- ATEX or UL approval

The Xgard-1-O2 is a single-gas Gas Leak Detector used to warn for gases (Oxygen, O₂, 0 ... 25 vol%), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For (Oxygen, O₂, 0 ... 25 vol%)
- Additional display and alarm station
- ATEX or UL approval

The Xgard-1-NH3 is a single-gas Gas Leak Detector used to warn for gases (Ammonia, NH₃, 0 ... 50 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For (Ammonia, NH₃, 0 ... 50 ppm)
- Additional display and alarm station
- ATEX or UL approval

The Xgard-1-H2 is a single-gas Gas Leak Detector used to warn for gases (Hydrogen, H₂, 0 ... 2000 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For (Hydrogen, H₂, 0 ... 2000 ppm)
- Additional display and alarm station
- ATEX or UL approval

The Xgard-1-CO is a single-gas Gas Leak Detector used to warn for gases (Carbon Monoxide, CO, 0 ... 250 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For (Carbon Monoxide, CO, 0 ... 250 ppm)
- Additional display and alarm station
- ATEX or UL approval

The Xgard-1-CL2 is a single-gas Gas Leak Detector used to warn for gases (Chlorine, CL₂, 0 ... 5 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For (Chlorine, CL₂, 0 ... 5 ppm)
- Additional display and alarm station
- ATEX or UL approval

The TXgard-IS+PH3 is a single-gas Gas Leak Detector used to warn for gases (Phosphine, PH₃, 0 ... 2 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For (Phosphine, PH₃, 0 ... 2 ppm)
- Additional display and alarm station
- ATEX or UL approval

The TXgard-IS+O3 is a single-gas Gas Leak Detector used to warn for gases (Ozone, O₃, 0 ... 1 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For (Ozone, O₃, 0 ... 1 ppm)
- Additional display and alarm station
- ATEX or UL approval

The TXgard-IS+O2 is a single-gas Gas Leak Detector used to warn for gases (Oxygen, O₂, 0 ... 25 vol%), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For (Oxygen, O₂, 0 ... 25 vol%)
- Additional display and alarm station
- ATEX or UL approval

The TXgard-IS+H2S is a single-gas Gas Leak Detector used to warn for gases (Hydrogen Sulfide, H₂S, 0 ... 50 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For Hydrogen Sulfide, H₂S, 0 ... 50 ppm
- Additional display and alarm station
- ATEX or UL approval

The TXgard-IS+CO is a single-gas Gas Leak Detector used to warn for gases (Carbon Monoxide, CO, 0 ... 500 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For Carbon Monoxide, CO, 0 ... 500 ppm
- Additional display and alarm station
- ATEX or UL approval

The TXgard-IS+CO is a single-gas Gas Detector used to warn for gases (Carbon Monoxide, CO, 0 ... 500 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For Carbon Monoxide, CO, 0 ... 500 ppm
- Additional display and alarm station
- ATEX or UL approval

The Xgard-1-CO is a single-gas Carbon Monoxide Meter used to warn for gases (Carbon Monoxide, CO, 0 ... 250 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For (Carbon Monoxide, CO, 0 ... 250 ppm)
- Additional display and alarm station
- ATEX or UL approval

The Xgard-1-SO2 is a single-gas Gassensor used to warn for gases (Sulfur Dioxide, SO₂, 0 ... 10 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For (Sulfur Dioxide, SO₂, 0 ... 10 ppm)
- Additional display and alarm station
- ATEX or UL approval

The Xgard-1-PH3 is a single-gas Gassensor used to warn for gases (Phosphine, PH₃, 0 ... 1 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For (Phosphine, PH₃, 0 ... 1 ppm)
- Additional display and alarm station
- ATEX or UL approval

The Xgard-1-O3 is a single-gas Gassensor used to warn for gases (Ozone, O₃, 0 ... 1 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For (Ozone, O₃, 0 ... 1 ppm)
- Additional display and alarm station
- ATEX or UL approval

The Xgard-1-O2 is a single-gas gas sensor used to warn for gases (Oxygen, O₂, 0 ... 25 vol%), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For (Oxygen, O₂, 0 ... 25 vol%)
- Additional display and alarm station
- ATEX or UL approval

The Xgard-1-NH3 is a single-gas Gas detector used to warn for gases (Ammonia, NH₃, 0 ... 50 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For (Ammonia, NH₃, 0 ... 50 ppm)
- Additional display and alarm station
- ATEX or UL approval

The Xgard-1-H2 is a single-gas Gas detector used to warn for gases (Hydrogen, H₂, 0 ... 2000 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For (Hydrogen, H₂, 0 ... 2000 ppm)
- Additional display and alarm station
- ATEX or UL approval

The Xgard-1-CO is a single-gas gas detector used to warn for gases (Carbon Monoxide, CO, 0 ... 250 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For (Carbon Monoxide, CO, 0 ... 250 ppm)
- Additional display and alarm station
- ATEX or UL approval

The Xgard-1-CL2 is a single-gas sas detector used to warn for gases (Chlorine, CL₂, 0 ... 5 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For (Chlorine, CL₂, 0 ... 5 ppm)
- Additional display and alarm station
- ATEX or UL approval

The TXgard-IS+PH3 is a single-gas Gas detector used to warn for gases (Phosphine, PH₃, 0 ... 2 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For (Phosphine, PH₃, 0 ... 2 ppm)
- Additional display and alarm station
- ATEX or UL approval

The TXgard-IS+O3 is a single-gas Gas detector used to warn for gases (Ozone, O₃, 0 ... 1 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For (Ozone, O₃, 0 ... 1 ppm)
- Additional display and alarm station
- ATEX or UL approval

The TXgard-IS+O2 is a single-gas Gassensor used to warn for gases (Oxygen, O₂, 0 ... 25 vol%), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For (Oxygen, O₂, 0 ... 25 vol%)
- Additional display and alarm station
- ATEX or UL approval

The TXgard-IS+H2S is a single-gas Gas Leak Detector used to warn for gases (Hydrogen Sulfide, H₂S, 0 ... 50 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).

- Stationary
- For Hydrogen Sulfide, H₂S, 0 ... 50 ppm
- Additional display and alarm station
- ATEX or UL approval

Single-Gas Gas Detector warning for gases (for Carbon Dioxide CO₂), / without display / with signal output for sensors in combination with a stationary equipment to detect gases (with ATEX approval).

- Stationary
- For Carbon Dioxide CO₂
- Additional display and alarm station
- ATEX approved