2 year Warranty
The Xgard-1-PH3 is a single-gas Gassensor used to warn for gases (Phosphine, PH3, 0 ... 1 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).
- Stationary
- For (Phosphine, PH3, 0 ... 1 ppm)
- Additional display and alarm station
- ATEX or UL approval
The Xgard-1-PH3 is a single-gas Gas Leak Detector used to warn for gases (Phosphine, PH3, 0 ... 1 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).
- Stationary
- For (Phosphine, PH3, 0 ... 1 ppm)
- Additional display and alarm station
- ATEX or UL approval
The Xgard-1-H2 is a single-gas Gas detector used to warn for gases (Hydrogen, H2, 0 ... 2000 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).
- Stationary
- For (Hydrogen, H2, 0 ... 2000 ppm)
- Additional display and alarm station
- ATEX or UL approval
The Xgard-1-H2 is a single-gas Gas Leak Detector used to warn for gases (Hydrogen, H2, 0 ... 2000 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).
- Stationary
- For (Hydrogen, H2, 0 ... 2000 ppm)
- Additional display and alarm station
- ATEX or UL approval
The Xgard-1-O3 is a single-gas Gassensor used to warn for gases (Ozone, O3, 0 ... 1 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).
- Stationary
- For (Ozone, O3, 0 ... 1 ppm)
- Additional display and alarm station
- ATEX or UL approval
The Xgard-1-NH3 is a single-gas Gas detector used to warn for gases (Ammonia, NH3, 0 ... 50 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).
- Stationary
- For (Ammonia, NH3, 0 ... 50 ppm)
- Additional display and alarm station
- ATEX or UL approval
The Xgard-1-O3 is a single-gas Gas Leak Detector used to warn for gases (Ozone, O3, 0 ... 1 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).
- Stationary
- For (Ozone, O3, 0 ... 1 ppm)
- Additional display and alarm station
- ATEX or UL approval
The Xgard-1-NH3 is a single-gas Gas Leak Detector used to warn for gases (Ammonia, NH3, 0 ... 50 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).
- Stationary
- For (Ammonia, NH3, 0 ... 50 ppm)
- Additional display and alarm station
- ATEX or UL approval
The Xgard-1-NO2 is a single-gas gas sensor used to warn for gases (Nitrogen dioxide, NO₂, 0 ... 10 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).
- Stationary
- For (Nitrogen dioxide, NO₂, 0 ... 10 ppm)
- Additional display and alarm station
- ATEX or UL approval
The Xgard-1-NO2 is a single-gas gas sensor used to warn for gases (Nitrogen dioxide, NO₂, 0 ... 10 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).
- Stationary
- For (Nitrogen dioxide, NO₂, 0 ... 10 ppm)
- Additional display and alarm station
- ATEX or UL approval
The Xgard-1-SO2 is a single-gas Gassensor used to warn for gases (Sulfur Dioxide, SO2, 0 ... 10 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).
- Stationary
- For (Sulfur Dioxide, SO2, 0 ... 10 ppm)
- Additional display and alarm station
- ATEX or UL approval
The Xgard-1-CL2 is a single-gas sas detector used to warn for gases (Chlorine, CL2, 0 ... 5 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).
- Stationary
- For (Chlorine, CL2, 0 ... 5 ppm)
- Additional display and alarm station
- ATEX or UL approval
The Xgard-1-CL2 is a single-gas Gas Leak Detector used to warn for gases (Chlorine, CL2, 0 ... 5 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).
- Stationary
- For (Chlorine, CL2, 0 ... 5 ppm)
- Additional display and alarm station
- ATEX or UL approval
The Xgard-1-CO is a single-gas gas detector used to warn for gases (Carbon Monoxide, CO, 0 ... 250 ppm), with display and signal output for sensors in combination with a stationary instrument to detect gases (ATEX or UL approval).
- Stationary
- For (Carbon Monoxide, CO, 0 ... 250 ppm)
- Additional display and alarm station
- ATEX or UL approval