Order no.: PCE-PTR 200N

Force Gauge PCE-PTR 200N

Question / Callback

Delivery time: 1-2 working days

Description

PCE-PTR 200N Force gauge for tensile force measurement and pressure force measurement up to 200 N (45 lbs) USB interface and downloadable evaluation software for data transmission / Many measuring adapters

The PCE-PTR 200N force gauge is a hand-held device up to 200 N / 45 lbs. The force measuring device can determine the units N, kg and lb. The PCE-PTR 200N force gauge is supplied with various shaped adapters. These can be screwed onto the device and thus offer the optimum solution for differently designed surfaces in the measurement of pressure and tension. In addition to the adapters, an extension rod is also supplied, which allows measurements in hard to reach places. This extension rod has a length of 65 millimeters / 2.6 inches. The PCE-PTR 200N force gauge includes a flat head adapter, hook adapter, ball head adapter, chisel head adapter, and a notched head adapter, with the hook adapter used for pulling force measurements.

The PCE-PTR 200N force gauge offers the possibility to attach the force measuring device to a test stand by means of threads on the rear of the device. Test stands are always used in a force gauge if reproducible measurement results are required during the force measurement. These test stands are ideal additions to a force gauge, because they are operated by a precise hand wheel or a motor. In addition, both tensile and compressive force measurements can be performed on them. Experiments in the laboratory are thus possible with the force gauge as well as the inspection at the incoming goods inspection.

Attention: The internal load cell is maintenance-free, light and characterized by extremely long service life. For the production of this load cell only high quality materials are used, which guarantee maximum safety and longevity. The force gauge has an overload range. If you exceed this, you destroy the internal load cell. So if you select a force gauge for your application, then for safety's sake move to the next higher model at the measuring range.

Highlights

- Differently shaped measuring adapter
- Downloadable evaluation software
- Device for mounting on test stands
- Peak measurement
- Power supply via charging adapter
- Delivery with extension rod
- Evaluation via USB interface
- Fast measured value display

Specification

Measuring range	0 ... 200 N / 0 ... 45 lbs
Resolution	0.1 N / 0.02 lbs
Pressure calibration	1 Mpa
Load cell	Integrated load cell with M6 connection
Measuring range	1 ... 100% of the full scale
Measurement accuracy	± 0.5%
Units	n, kg, lb
Display	LCD
Operating temperature	10 ... 30°C / 50 ... 86°F
Relative humidity	15 ... 80% relative humidity
Working conditions	The device must not be located near sources of vibration or corrosive substances
Weight	1 kg / 2.2 lbs

Delivery Scope

1 x Dynamometer (Penetrometer) PCE-PTR 200N
1 x Penetration tip Ø 6 mm
1 x Penetration tip Ø 8 mm
1 x Penetration tip Ø 11 mm
1 x Flathead adapter
1 x Hook adapter
1 x Ball head adapter
1 x Chisel head adapter
1 x Notch head adapter
1 x Extension rod (65 mm)
1 x USB cable
1 x Power plug
2 x Locking rings
1 x Equipment case
1 x Software
1 x User manual

Downloads

Manual

Datasheet

Accessories

ISO Calibration Certificate CAL-FG

£ 171.00

Price excl. VAT &. delivery
2 year Warranty

CAL-FG is a calibration certificate for companies that wish to incorporate the device into their array of internal quality control tools or for annual recalibrations. The calibration certificate includes calibration in accordance with ISO standards and a document containing all the readings taken.

The calibration certificate is issued especially for the customer and therefore is exempt from the right of return.

Test Stand

Force Test Stand PCE-FTS50

£ 481.00

Price excl. VAT &. delivery
2 year Warranty

Force test stand PCE-FTS50 with digital display is suitable for load cells with internal measuring cell, e.g. for the PCE-FM50, PCE-FM200, PCE-DFG N 200, PCE-DFG N 500, or PCE-PTR 200.

with digital measuring distance display
max. range of force 500 N
maximum operating length of 236.36 mm / 9.30"
the mounting plate ADP-UNI must be ordered at the same time!

Test Stand

Mounting adapter for test stand FG-ADP

£ 54.00

Price excl. VAT &. delivery
2 year Warranty

Mounting plate for adapting the load cell of the PCE-FM1000 to the test stand LTS-20.

Adapter Plate for Force Test Stand ADP-UNI

£ 62.00

Price excl. VAT &. delivery
2 year Warranty

Adapter plate for mounting the PCE-FM50, PCE-FM200, PCE-SH 500 and PCE-SH 2K force gauge transducers to the PCE-FTS50, PCE-MTS50 and PCE-MTS 500 motorized test stand.

Test Stand

Test Stand for Force Gauge PCE-MTS50

£ 1,228.00

Price excl. VAT &. delivery
2 year Warranty

PCE-MTS50 is a motorized material test stand for use with PCE-series force gauges. The motorized material test stand offers enhanced control and stability during force testing. It also helps to ensure the accuracy and repeatability of vertical tension and compression force test results.

Maximum force measurement: 500 N / 50 kg
Automatic or manual (push-button) operation
Adjustable feed speed: 50 … 500 mm / min
AC power connection (110V or 220V)
Adjustable traverse / distance
** The mounting plate ADP-UNI must be ordered for internal load cell force gauges!***