The car measuring device offers an advanced solution for visual inspection in extreme environments with temperatures of up to 300 °C. With a specially developed high-temperature camera cable, it enables reliable image and video recording even under extreme conditions. The integrated connection on the camera cable for air cooling ensures effective cooling during use.
With this car measuring device, weld seams, wear and tear and damage can be assessed quickly and easily in order to make quick diagnoses. The sheathing of the endoscope cable from the car measuring device consists of braided tungsten.
- Diameter: Ø2.2mm / 0.08" - Cable length: 1m / 3.2 ft - Camera direction: 90° - Resolution: 160,000 pixels - Focusing range: 5 ... 50 mm / 0.19 ... 1.96" - 7" touch screen for easy operation - replaceable battery with status display - Storage of recording on SD card - Motor with endoscope cable can be changed quickly - HDMI connection for direct image transmission
With this car measuring device, weld seams, wear and tear and damage can be assessed quickly and easily in order to make quick diagnoses. The sheathing of the endoscope cable from the car measuring device consists of braided tungsten.
- Endoscope cable length: approx. 2 m / 6.5 ft - Diameter: 3.8mm / 0.15" - Camera resolution 160,000 pixels each - Viewing angle front camera 120°, side camera 90° - Focusing distance 5 … 50 mm / 0.19 ... 1.96" each - Camera head length: 42 mm / 1.6" - Bending radius at 90° 35 mm / 1.3" - Live images from both cameras side by side - 7" touch screen for easy operation - Replaceable battery with status display - Storage of recording on SD card - Motor with endoscope cable can be changed quickly - HDMI connection for direct image transmission
An important point here are the charging stations for electric vehicles. To check the permanently installed charging stations, also called wall boxes, special measuring devices are required to check the function, the protective devices and the insulation. The EVSE Measuring Device is specially designed for this application and already comes with a variety of functions. For example, all lines leaving the charging station are output individually via laboratory plugs. Thus, all lines can be tapped via the EVSE Measuring Device.
- Loop resistance L-N, L-PE and N-PE - Adjustable FI test current - Up to 1000 V terminal voltage - Low Ohm measurement - Direct connection for wallboxes - Adapter with charging plugs type 1 and type 2 - PE conductor test - Integrated Schuko socket - incl. ISO Calibration Certificate (calibration is only for the Installation Tester in the kit!)
With this car measuring device, weld seams, wear and tear and damage can be assessed quickly and easily in order to make quick diagnoses. The sheathing of the endoscope cable from the car measuring device consists of braided tungsten.
- Diameter: Ø2.8mm / 0.11" - Cable length: 2m / 6.5 ft - Camera direction: 0° - Resolution: 160,000 pixels - Focusing range: 5 ... 50 mm / 0.19 ... 1.96" - 7" touch screen for easy operation - Replaceable battery with status display - Storage of recording on SD card - Motor with endoscope cable can be changed quickly - HDMI connection for direct image transmission
With this car measuring device, weld seams, wear and tear and damage can be assessed quickly and easily in order to make quick diagnoses. The sheathing of the endoscope cable from the car measuring device consists of braided tungsten.
- Diameter: Ø6mm / 0.23" - Cable length: 5m / 16.4 ft - Camera direction: 0° - Resolution: 1MP - Focusing range: 5 ... 50 mm / 0.19 ... 1.96" - 7" touch screen for easy operation - replaceable battery with status display - Storage of recording on SD card - Motor with endoscope cable can be changed quickly - HDMI connection for direct image transmission
With this car measuring device, weld seams, wear and tear and damage can be assessed quickly and easily in order to make quick diagnoses. The sheathing of the endoscope cable from the car measuring device consists of braided tungsten.
- Endoscope cable length: approx. 2 m / 6.5 ft - Diameter: 3.8mm / 0.15" - Front camera with resolution: 1,000,000 pixels - Front camera viewing angle 120° - Focus 10 … 100 mm / 0.39 … 3.9" - Movable camera head 46 mm / 1.8" long - Bending radius approx. 35 mm / 1.3" at 90° - 7" touch screen for easy operation - replaceable battery with status display - Storage of recording on SD card - Motor with endoscope cable can be changed quickly - HDMI connection for direct image transmission
With this car measuring device, weld seams, wear and tear and damage can be assessed quickly and easily in order to make quick diagnoses. The sheathing of the endoscope cable from the car measuring device consists of braided tungsten.
- Borescope camera cable length: 2 m / 6.5 ft - Cable diameter: 6mm / 0.23" - Direction of view of the camera frontal - Camera resolution 1 million pixels - Camera viewing angle 120° - Focusing distance 10 … 100 mm / 0.39 … 3.9" - Flexible camera head length 60 mm / 2.3" - Radius at 90° bend 50 mm / 1.9" - 7" touch screen for easy operation - replaceable battery with status display - Storage of recording on SD card - Motor with endoscope cable can be changed quickly - HDMI connection for direct image transmission
The EVSE Measuring Device is specially designed for this application and already comes with a variety of functions. For example, all lines leaving the charging station are output individually via laboratory plugs. Thus, all lines can be tapped via the EVSE Measuring Device. An important point here are the charging stations for electric vehicles. To check the permanently installed charging stations, also called wall boxes, special measuring devices are required to check the function, the protective devices and the insulation.
- Loop resistance L-N, L-PE and N-PE - Adjustable FI test current - Up to 1000 V terminal voltage - Low Ohm measurement - Direct connection for wallboxes - Adapter with charging plugs type 1 and type 2 - PE conductor test - Integrated Schuko socket
The car measuring device has a 1.2 m / 3.9 ft long endoscope cable. With a diameter of only 2 mm, cavities with the smallest access can be viewed with the help of this car measuring device. The camera head of this car measuring device can move freely in 4 directions.
- Cable / head diameter: 2 mm - Direction of movement camera head: 4-way - Camera head length: 7 mm - Bending radius: 6 mm - 1.2 m / 3.9 ft endoscope cable - 5" monitor - Image and video memory - IP58 camera cable - 400 x 400 pixel image resolution
The Car Measuring Device is for VDE 0100 testers to test charging stations (charging mode 3) for electric cars. This VDE tester can be used with the PCE-ITE 55B installation tester or with most other standard VDE 0100 testers. Thanks to the LEDs for voltage detection on the 3 phases, it can be quickly determined if there is an installation error.
- PE pre-test
- Proximity-Pilot PP / Control-Pilot CP
- Simulation CP error "E" / PE error
- Mains socket for measuring purposes
- Safety measuring sockets - incl. type 2 plug and adapter to type 1
The Car Measuring Device is for VDE 0100 testers to test charging stations (charging mode 3) for electric cars. This VDE tester can be used with the PCE-ITE 55B installation tester or with most other standard VDE 0100 testers. Thanks to the LEDs for voltage detection on the 3 phases, it can be quickly determined if there is an installation error.
The device clamp force gage PCE-4PCFM is a 4-point force gauge that can ensure the optimal clamp force distribution. The force gage is used on device clamps for white and brown goods to avoid damage caused by incorrect force distribution.
- Measuring range: 30,000 N / 3,000 kg / 3 t - Resolution: 10N / 1kg - Measurement uncertainty: ±0.5% full scale - Position of the 4 sensors is adjustable - Touch display including printer - Optional: Measurement data storage on USB stick
Electromobility is playing an increasingly important role. An important point here are the charging stations for electric vehicles. To check the permanently installed charging stations, also called wall boxes, special car measuring devices are required to check the function, the protective devices and the insulation.
- CP and PP simulation - Direct connection for wallboxes - Adapter with charging plugs Type 1 and Type 2 - CP simulation (communication line) A, B, C, D, error
The device clamp force gauge PCE-4PCFM is a 4-point force gauge that can ensure the optimal clamp force distribution. The force gauge is used on device clamps for white and brown goods to avoid damage caused by incorrect force distribution.
- Measuring range: 30,000 N / 3,000 kg / 3 t - Resolution: 10N / 1kg - Measurement uncertainty: ±0.5% full scale - Position of the 4 sensors is adjustable - Touch display including printer - Optional: Measurement data storage on USB stick
The car measuring device gives you new, visual insights into the interior of motors and systems. The car measuring device is the ideal tool for maintenance and repair in workshops or industrial companies. Optical analysis with a videoscope has never been so easy.
- Cable length: 1000 mm, 3.28 ft - Cable diameter: 2.1 mm, 0.08" - 0° viewing angle - Camera resolution / image sensor: 400 x 400 Px - Cable type: flexible - Video output: HDMI - LED light
The car measuring device has a 1.5 m / 4.9 ft long endoscope cable. With a diameter of only 2.8 mm, cavities with the smallest access can be viewed with the help of this car measuring device. The camera head of this car measuring device can move freely in 4 directions.
- Cable / head diameter: 2.8 mm - Direction of movement camera head: 4-way - Camera head length: 8 mm - Bending radius: 7 mm - 1.5 m / 4.9 ft endoscope cable - 5" monitor - Image and video memory - IP58 camera cable - 400 x 400 pixel image resolution
An important point here are the charging stations for electric vehicles. To check the permanently installed charging stations, also called wall boxes, special measuring devices are required to check the function, the protective devices and the insulation. The PAT Tester is specially designed for this application and already comes with a variety of functions. For example, all lines leaving the charging station are output individually via laboratory plugs. Thus, all lines can be tapped via the PAT Tester.
- Loop resistance L-N, L-PE and N-PE - Adjustable FI test current - Up to 1000 V terminal voltage - Low Ohm measurement - Direct connection for wallboxes - Adapter with charging plugs type 1 and type 2 - PE conductor test - Integrated Schuko socket - incl. ISO Calibration Certificate (calibration is only for the Installation Tester in the kit!)