Environmental Tester

Order no.: PCE-PH 30
The environmental tester PCE-PH 30 is the optimal tool for checking the most important water parameters. The portable environmental tester PCE-PH 30 is used to control pH and conductivity.

- 6 in 1 pH tester
- Measuring range: 0 ... 2000 μS, 2 ... 20 mS
- 3 point pH calibration
- Exchangeable electrodes
- Automatic electrode detection
Manufacturer: PCE Instruments
£ 161.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-423N
The environmental tester has a measuring range of up to 0 ... 30 m/s. In addition to the velocity, the environmental tester can precisely measure the volume flow and temperature. The compact design of the sensors, in combination with the extendable telescopic probe, enable measurements to be taken even in places that are particularly difficult to access.

- Speed: 0.00 ... 30.00 m/s / 0.00 ... 98.42 ft/s
- Volume flow: 0.0 ... 339120.0 m3/h
- Temperature: 0 ... 50 °C / 32 ... 122 °F
- Telescopic probe length: 210 ... 426 mm / 8.2 ... 16.7"
- Telescopic probe diameter: 12 mm / 0.47"
Manufacturer: PCE Instruments
£ 164.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-HVAC 3

PCE-HVAC 3 is a multifunction environmental tester or diagnostic measuring device used for indoor climate and environmental monitoring. In addition to measuring relative humidity and ambient room / dry-bulb temperature, the meter calculates dew-point and wet-bulb temperatures in degrees Celsius (°C) and Fahrenheit (°F). Thus, heating, ventilation and air conditioning (HVAC) installations and HVAC system performance assessments are key applications of the PCE-HVAC 3 meter.


- Relative humidity measuring range: 0 ... 100% RH
- Ambient / dew-point temp. range: -30 ... 100°C / -22 ... 212°F
- Wet-bulb temp. range: 0 ... 80°C / 32 ... 176°F

 

Manufacturer: PCE Instruments
£ 164.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-AM 45
The environmental tester determines the wind speed via an impeller with a diameter of 65 mm. The environmental tester can reliably determine the speed in a measuring range of 0.3 ... 45.0 m/s.

- Measuring range: 0.3 ... 45.0 m/s / 0.9 ... 147 ft/s
- Velocity and volume flow measurement
- Telescopic probe with a length of 270 ... 540 mm / 10.63 … 21.26“
- Impeller opening of 65 mm / 2.5"
- Interface: Micro USB
- Data memory: 960 measured values
Manufacturer: PCE Instruments
£ 169.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-AM 85
The compact environmental tester PCE-AM 85 is an ideal companion for every outdoor activist. This lightweight environmental tester with altimeter and barometer function should not be missing on any tour. The environmental tester PCE-AM 85 informs you about the reached altitude of -2000 ... 9000 m / -6,561 ... 29,527 ft.

- Altimeter up to 9,000 m / 29,527 ft
- Air pressure (absolute)
- Wind speed
Manufacturer: PCE Instruments
£ 170.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-PH20S-ICA

The soil environmental tester is a straightforward device for determining the pH value of soil. The instrument has an external pH electrode with cable and it is waterproof (IP 67). The soil environmental tester can be recalibrated by using the calibration solutions that are supplied with the device.


- Measuring range: 0.00 ... 14.00 pH
- Resolution: 0.01 pH
- waterproof (IP 67)
- Data-Hold function
- Calibration: automatic, pH 4, 7, or 10
- pH electrode for piercing into Soil
- Incl. ISO calibration certificate

 **Care must be taken when inserting probe to not break it**

Manufacturer: PCE Instruments
£ 170.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-FWS 20N-1

This environmental tester with outside sensor is a real all-rounder. The wireless environmental tester with outside sensor is easy to assemble based on the instructions provided. You do not have to be a professional to operate the wireless environmental tester and outside sensors. The weather data of the environmental tester with outside sensor for different parameters are sent up to 100 meters by radio signal to the main station.


- 2 displays
- Indoor temperature in Celsius or Fahrenheit
- Outside temperature in Celsius or Fahrenheit
- Indoor air humidity / outdoor air humidity
- Air pressure gauge in inHg or hPa
- Absolute or relative air pressure display selectable
- Precipitation indication in mm or inch
- Precipitation indicator for 1 hour, 24 hours, 1 week, 1 month
- Wind speed in mph, km / h, m / s, knots ...
- Wind direction indicator
- Wind chill temperature gauge
- Weather forecast, trend indicator, storm warning
- and much more...

Manufacturer: PCE Instruments
£ 171.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-GA 12
The environmental tester PCE-GA 12 is a very easy-to-use measuring device. This environmental tester detects combustible gases and emits a vibrating alarm as well as an audible alarm once a combustible gas has been detected by the environmental tester. 

- Measuring range up to 10000 ppm
- Audible alarm with 85 dB
- Rechargeable battery for mobile use
- Automatic calibration
- For the detection of combustible gases
Manufacturer: PCE Instruments
£ 173.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-HT 70-ICA
The environmental tester records the air temperature and humidity and stores them internally. The compact environmental tester with a large memory (up to a maximum of 16,000 values) is primarily used for long-term registration, for example in the food sector (e.g. refrigerated counters in supermarkets, refrigerated transport, warehouses) or in the industrial sector (heating and cooling processes, machine temperatures, product warehouses...)

- Measuring range temperature: -40 ... 85 °C / -40 ... 185 °F
- Measuring range rel. humidity: 0 ... 100%
- Max. 16,000 data records can be saved
- Export to software possible
- 450 day running time
- Adjustable storage rate from 1 second
- incl. ISO Calibration Certificate
Manufacturer: PCE Instruments
£ 174.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-HWA 20BT
The environmental tester has a measuring range of 0 ... 30 m / s. In addition to the air flow, the environmental tester can also measure the ambient temperature between -20 ... 60°C / -4 ... 140°F and the ambient humidity between 0 ... 100% RH.

- Wind speed measuring range: 0.00 ... 30.00 m / s
- Temperature measuring range: -20 ... 60°C / -4 ... 140° F
- Humidity measuring range: 0 ... 100% RH
- Telescope diameter 12 mm
- 390 mm / 15.4 in telescopic pole
- Bluetooth 4.0 interface
Manufacturer: PCE Instruments
£ 174.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-LMD 10
The environmental tester has a large measuring range of 0 … 400 lux. The illuminance is measured using an external silicon photodiode with a spectral filter. This means that the environmental tester can be positioned appropriately for every measuring task.

- Measuring range: 1000 ... 400,000 lux
- Resolution: 0.1 lux
- Lux and footcandle units
- Micro-USB interface
- Incl. software
- Rechargeable battery
- Data memory: 32,000 sets of readings
Manufacturer: PCE Instruments
£ 174.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-PHM 14-ICA
The Environmental Tester PCE-PHM 14 is designed for permanent monitoring of the pH value. The environmental tester PCE-PHM 14 has a backlit LC display that is easy to read remotely. The environmental tester is equipped with an automatic calibration function at pH 4, 7 and 10. This means that the device automatically detects the buffer solution and calibrates itself.


- Measuring range: 0 ... 14 pH
- Resolution: 0.01 pH
- Compact device for wall mounting
- Internal calibration function
- Ideal for continuous monitoring
- Incl. PH electrode PE - 03
- Incl. ISO calibration certificate

Manufacturer: PCE Instruments
£ 184.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-EM 29

PCE-EM 29 is a portable handheld environmental tester or electromagnetic radiation detector with a spherical triaxial (3-axis) three-dimensional (3D) isotropic sensor used to measure electromagnetic fields (EMFs) as well as radio frequencies (RFs). This easy-to-use battery-powered RF meter features a large 4-digit LCD screen and an adjustable value limit with acoustic alarm functionality.


- Frequency range: 50 MHz to 3.5 GHz
- Measures EMF of 5G cellular Low-band and Mid-band
- Measurement range: 38 mV/m to 11 V/m
- Accuracy: ±1.0 dB (50 MHz to 1.9 GHz), ±2.4 dB (1.9 GHz to 3.5 GHz)
- Displays units in mV/m, V/m, µgA/m, mA/m, µgW/m² or mW/m²
- Calculates average value and stores up to 99 readings to memory 

 

Manufacturer: PCE Instruments
£ 195.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-CMM 10
The environmental tester PCE-CMM 10 is a multi-function meter for measuring the air quality. This environmental tester measures synchronously the CO2 concentration, the air temperature and the humidity. 

- Measuring range CO2: 400 ... 5000 ppm
- Measuring range temperature: -10.0 ... 50.0°C / 14 ... 122°F
- Measuring range humidity: 0 ... 99% rh
- Battery operation
- Limit exceeded
- Beep
Manufacturer: PCE Instruments
£ 195.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-HT 71N-ICA

The PCE-HT 71N environmental tester detects air temperature and humidity and stores readings in its internal memory. The environmental tester has a compact format and a wide memory capacity (up to 32,000 values / 16,000 values for each parameter) and it is mainly used as a data logger in fields such as supermarket refrigeration units, refrigerated transport, warehouses, and other temperature controlled environments.


- Measurement range: 0 ... 100% RH / -35 ... 70°C / -31 ... 176°F
- Accuracy: ± 3% RH (20 ... 80%) and  ± 5% / ± 1°C (1.8°F)
- Resolution: 0.5% RH / 0.1°C (0.18°F)
- Memory: Max. 32,000 measurement data (16,000 for each parameter (humidity / temperature))
- Incl. ISO calibration certificate 

Manufacturer: PCE Instruments
£ 195.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-HT110

The PCE-HT110 Environmental Tester or Humidity Detector precisely measures air temperature and relative humidity. This accurate and reliable device shows the current measurements on the large LCD display and saves the measurement data directly to an SD card (included). The PCE-HT110 is equipped with two channels, accommodates an SD card memory of up to 16 GB, offers an adjustable measurement rate / sampling interval, and includes a wall mount, making the device ideal for logging data over an extended period of time.


- Measurement ranges: 0 … 50°C / 32 ... 122°F, 10 ... 90% RH
- Resolution: 0.1°C / 0.18°F, 0.1% RH
- Data format: .XLS (compatible with Microsoft Excel)

Manufacturer: PCE Instruments
£ 195.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-THB 40
The environmental tester records the air temperature as well as the relative humidity and the barometric pressure and saves them internally on an SD card. The compact device with a large memory (up to max. 16 GB SDHC card) is primarily used for long-term registration in the food sector (refrigerated counters in department stores, refrigerated transports, warehouses) as well as for measurement and recording in industry (heating and cooling processes, machine temperatures, product storage, etc.).

Measuring ranges
- Temperature: 0 ... 50 °C /  32 ... 122 °F
- Relative humidity: 10 ... 90% r.h.
- Barometric pressure: 10 ... 1100 hPa (mbar)
- Selectable pressure unit: hPa, mmHg and inHg
- Real-time data storage
Manufacturer: PCE Instruments
£ 195.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-353N-ICA
The environmental tester is a sound meter with an adjustable measuring range of 30 ... 130 dB. The measured values ​​are displayed on the environmental tester on the one hand as a normal numerical value and on the other hand also graphically in the measuring range set by the user.

- Measuring range: 30 ... 130 dBA, 35 ... 130 dBC
- Measurement functions: Lp, LAeq, LAe, LCpeak
- Accuracy: ± 1.5 dB (at 1 KHz and 94 dB)
- Class 2 with frequency weighting: A and C
- Storage for 10 readings and bar graph display
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
£ 196.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-353N-SC43
The environmental tester is a sound meter with an adjustable measuring range of 30… 130 dB. With the environmental tester, the measured values ​​are displayed on the one hand as a normal numerical value and on the other hand also graphically in the measuring range set by the operator.

- Measuring range: 30 ... 130 dB, 35 ... 130 dBC
- Measurement functions: Lp, LAeq, LAe, LCpeak
- Accuracy: ± 1.5 dB (at 1 KHz and 94 dB)
- Frequency weighting: A and C
- Class 2
- Including class II sound calibrator
Manufacturer: PCE Instruments
£ 196.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-323
With the Bluetooth interface, the Bluetooth environmental tester can be set up with an Android or iOS device. The measured values ​​from the Bluetooth environmental tester can be transmitted live and saved via the free app.

- Noise level range: Auto 30 ... 130 dB
- Resolution: 0.1dB
- Accuracy: ±1.4dB
- Frequency range: 31.5 Hz...8 kHz
- Frequency Rating: A and C
- Data interface: USB, Bluetooth 4.0
- Free app
- Accuracy class: IEC61672-1 Class 2
Manufacturer: PCE Instruments
£ 200.00

Price excl. VAT &. delivery
2 year Warranty