Environmental Tester

Order no.: PCE-FWS 20N

This environmental tester with outside sensor is a real all-rounder. The wireless environmental tester with outside sensor is easy to assemble based on the instructions provided. You do not have to be a professional to operate the wireless environmental tester and outside sensors. The weather data of the environmental tester with outside sensor for different parameters are sent up to 100 meters by radio signal to the main station.


- Indoor temperature in Celsius or Fahrenheit
- Outside temperature in Celsius or Fahrenheit
- Indoor air humidity / outdoor air humidity
- Air pressure gauge in inHg or hPa
- Absolute or relative air pressure display selectable
- Precipitation indication in mm or inch
- Precipitation indicator for 1 hour, 24 hours, 1 week, 1 month
- Wind speed in mph, km / h, m / s, knots ...
- Wind direction indicator
- Wind chill temperature gauge
- Weather forecast, trend indicator, storm warning
- and much more...

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PH 30
The environmental tester PCE-PH 30 is the optimal tool for checking the most important water parameters. The portable environmental tester PCE-PH 30 is used to control pH and conductivity.

- 6 in 1 pH tester
- Measuring range: 0 ... 2000 μS, 2 ... 20 mS
- 3 point pH calibration
- Exchangeable electrodes
- Automatic electrode detection
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-HVAC 3

PCE-HVAC 3 is a multifunction environmental tester or diagnostic measuring device used for indoor climate and environmental monitoring. In addition to measuring relative humidity and ambient room / dry-bulb temperature, the meter calculates dew-point and wet-bulb temperatures in degrees Celsius (°C) and Fahrenheit (°F). Thus, heating, ventilation and air conditioning (HVAC) installations and HVAC system performance assessments are key applications of the PCE-HVAC 3 meter.


- Relative humidity measuring range: 0 ... 100% RH
- Ambient / dew-point temp. range: -30 ... 100°C / -22 ... 212°F
- Wet-bulb temp. range: 0 ... 80°C / 32 ... 176°F

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PH 22-ICA
The environmental tester is used for fast and accurate detection of pH and temperature. Due to the practical double display, both values ​​can be read simultaneously on the environmental tester.


- Measuring range: 0.0 ... 14.0 pH
- Resolution: 0.01 pH
- Accuracy: ± 0.02 pH
- 100 points Datalogger
- (ATC) in the range 0 ... 80°C / 32 ... 176°F
- Waterproof to IP 67
- Incl. ISO calibration certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-GA 12
The environmental tester PCE-GA 12 is a very easy-to-use measuring device. This environmental tester detects combustible gases and emits a vibrating alarm as well as an audible alarm once a combustible gas has been detected by the environmental tester. 

- Measuring range up to 10000 ppm
- Audible alarm with 85 dB
- Rechargeable battery for mobile use
- Automatic calibration
- For the detection of combustible gases
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-RCM 8
The environmental tester PCE-RCM 8 performs many measuring tasks. For example, the environmental tester can measure mass concentration, formaldehyde and TVOC. This environmental tester is specially designed for indoor measurement. 

- Formaldehyde in mg / m³
- Measurement of TVOC
- Temperature measurement
- Alarm function
- Mass concentration
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-A420

Without a doubt, the main advantage of this handheld cup vane Environmental Tester is that it doesn't need to be held exactly in the direction of the wind. Environmental Tester with impellers typically have to be held exactly in the direction of the air flow to take accurate measurements. Digital cup vane Environmental Tester, wind direction will not influence the measurement.


- 0.9 to 35.0 m/s
- 2.5 to 126.0 km/h
- 1.4 to 68.0 knots
- 1.6 to 78.2 miles/h 

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-174

The PCE-174 Environmental Tester with memory for up to 16,000 readings is used for measuring light in industry, agriculture, and research. The Environmental Tester is also used for determining illumination in the workplace, shop window displays, and by designers. It meets all international standards within the category for Environmental Testers.


- Measurement range: 0 ... 400,000 lx
- Sampling rate: 2 ... 99 sec.
- Logging function for 16,000 readings
- Minimum, maximum and hold functions
- Backlight display 

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PH20S-ICA

The soil environmental tester is a straightforward device for determining the pH value of soil. The instrument has an external pH electrode with cable and it is waterproof (IP 67). The soil environmental tester can be recalibrated by using the calibration solutions that are supplied with the device.


- Measuring range: 0.00 ... 14.00 pH
- Resolution: 0.01 pH
- waterproof (IP 67)
- Data-Hold function
- Calibration: automatic, pH 4, 7, or 10
- pH electrode for piercing into Soil
- Incl. ISO calibration certificate

 **Care must be taken when inserting probe to not break it**

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PH20-ICA
The Environmental Tester PCE-PH20-ICA was developed to directly determine the pH in aqueous media or water based solutions. Depending on the purpose of creating an aquarium, whether commercial, scientific (experimental and laboratory tests) or decorative, the most desirable pH level should be maintained to provide correct living conditions for the fish and other organisms.


- Measuring range: 0.00 ... 14.00 pH
- Resolution: 0.01 pH
- Waterproof (IP 67)
- Data-Hold function
- Calibration: automatic, pH 4, 7 or 10
- Aqueous media
- Incl. ISO calibration certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-EM 888

PCE-EM 888 is a portable handheld environmental tester ideal for monitoring weather conditions and the performance of heating, ventilation and air conditioning (HVAC) systems. This multifunctional digital device is used to measure wind speed, volumetric air flow, temperature, relative humidity, light and barometric pressure.

- Wind speed
- Volumetric air flow
- Air temperature
- Relative humidity
- Type K thermocouple sensor
- Barometric pressure
- Light

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-HT110

The PCE-HT110 Environmental Tester or Humidity Detector precisely measures air temperature and relative humidity. This accurate and reliable device shows the current measurements on the large LCD display and saves the measurement data directly to an SD card (included). The PCE-HT110 is equipped with two channels, accommodates an SD card memory of up to 16 GB, offers an adjustable measurement rate / sampling interval, and includes a wall mount, making the device ideal for logging data over an extended period of time.


- Measurement ranges: 0 … 50°C / 32 ... 122°F, 10 ... 90% RH
- Resolution: 0.1°C / 0.18°F, 0.1% RH
- Data format: .XLS (compatible with Microsoft Excel)

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PHM 14-ICA
The Environmental Tester PCE-PHM 14 is designed for permanent monitoring of the pH value. The environmental tester PCE-PHM 14 has a backlit LC display that is easy to read remotely. The environmental tester is equipped with an automatic calibration function at pH 4, 7 and 10. This means that the device automatically detects the buffer solution and calibrates itself.


- Measuring range: 0 ... 14 pH
- Resolution: 0.01 pH
- Compact device for wall mounting
- Internal calibration function
- Ideal for continuous monitoring
- Incl. PH electrode PE - 03
- Incl. ISO calibration certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-CMM 10
The environmental tester PCE-CMM 10 is a multi-function meter for measuring the air quality. This environmental tester measures synchronously the CO2 concentration, the air temperature and the humidity. 

- Measuring range CO2: 400 ... 5000 ppm
- Measuring range temperature: -10.0 ... 50.0°C / 14 ... 122°F
- Measuring range humidity: 0 ... 99% rh
- Battery operation
- Limit exceeded
- Beep
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-THB 40

PCE-THB 40 is a digital thermometer-hygrometer-barometer with data recording functionality. This compact yet robust data logger detects ambient temperature, relative humidity and atmospheric or barometric pressure. Measurement values are displayed in real time on the large LCD screen and saved to the included SD card as a Microsoft Excel-compatible .XLS file for seamless transfer to a PC or portable computer.


- Ambient temperature range: 0 ... 50°C / 32 ... 122°F
- Relative humidity (RH) range: 10 ... 90% RH
- Barometric pressure range: 10 ... 1100 hPa / 7.5 ... 825 mmHg / 0.29 ... 32.48 inHg

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-353N-ICA
The environmental tester is a sound meter with an adjustable measuring range of 30 ... 130 dB. The measured values ​​are displayed on the environmental tester on the one hand as a normal numerical value and on the other hand also graphically in the measuring range set by the user.

- Measuring range: 30 ... 130 dB, 35 ... 130 dBC
- Measurement functions: Lp, LAeq, LAe, LCpeak
- Accuracy: ± 1.5 dB (at 1 KHz and 94 dB)
- Frequency weighting: A and C
- Class 2
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-HT 71N-ICA

The PCE-HT 71N environmental tester detects air temperature and humidity and stores readings in its internal memory. The environmental tester has a compact format and a wide memory capacity (up to 32,000 values / 16,000 values for each parameter) and it is mainly used as a data logger in fields such as supermarket refrigeration units, refrigerated transport, warehouses, and other temperature controlled environments.


- Measurement range: 0 ... 100% RH / -35 ... 70°C / -31 ... 176°F
- Accuracy: ± 3% RH (20 ... 80%) and  ± 5% / ± 1°C (1.8°F)
- Resolution: 0.5% RH / 0.1°C (0.18°F)
- Memory: Max. 32,000 measurement data (16,000 for each parameter (humidity / temperature))
- Incl. ISO calibration certificate 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-SLM 10
The environmental sound tester PCE-SLM 10 is suitable for the continuous measurement and visualization of the sound pressure level. The environmental sound tester PCE-SLM 10 is used in schools, open-plan offices, bars, clubs and other event rooms. Micro USB powered via external charger or battery pack.

- 75 mm / 3 in digit height
- 30 ... 130 dBA measuring range
- 0.1 dB or 1 dB resolution
- For offices, schools, event rooms
- Memory for 657,000 readings
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-EM 29

PCE-EM 29 is a portable handheld environmental tester or electromagnetic radiation detector with a spherical triaxial (3-axis) three-dimensional (3D) isotropic sensor used to measure electromagnetic fields (EMFs) as well as radio frequencies (RFs). This easy-to-use battery-powered RF meter features a large 4-digit LCD screen and an adjustable value limit with acoustic alarm functionality.


- Frequency range: 50 MHz to 3.5 GHz
- Measurement range: 38 mV/m to 11 V/m
- Accuracy: ±1.0 dB (50 MHz to 1.9 GHz), ±2.4 dB (1.9 GHz to 3.5 GHz)
- Displays units in mV/m, V/m, µgA/m, mA/m, µgW/m² or mW/m²
- Calculates average value and stores up to 99 readings to memory 

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-EM 890
The environmental tester PCE-EM 890 is an instrument for measuring environmental conditions. Thus, this environmental tester is ideal for technicians, sailors, farmers and many more people who are dependent on the weather or whose activities are significantly influenced by the weather.

Measurement functions:
- Humidity / temperature
- UV
- Air pressure
- Volume flow
- Dew point
- Wet bulb temperature
- Windchill
- Heat stress index
- Height above sea level
- External temperature over Pt1000
Manufacturer: PCE Instruments
Test Instruments manufacturer