Environmental Tester

Order no.: PCE-CMM 10-ICA
The Environmental Tester PCE-CMM 10-ICA is a multi-function meter for measuring the air quality. This environmental tester measures synchronously the CO2 concentration, the air temperature and the humidity.

- Measuring range CO2: 400 ... 5000 ppm
- Measuring range temperature: -10.0 ... 50.0°C / 14 ... 122°F
- Measuring range humidity: 0 ... 99% rh
- Battery operation
- Limit exceeded
- Beep
- incl. ISO Calibration Certificate (for CO2 only)
Manufacturer: PCE Instruments
£ 231.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-228-ICA
The environmental tester PCE-228-ICA is a very easy-to-use pH / mV / °C /°F handheld instrument. The pH value and the temperature can be stored directly on the SD card (Excel file) or transferred directly from the environmental tester to a PC via the RS-232 interface. You can buy the environmental tester PCE-228-ICA here in our shop.

- Measuring range: 0.00 ... 14.00 pH
- Resolution: 0.01 pH
- Accuracy: ± (0.02 pH + 2d)
- Memory: flexible via SD card memory 1 ... 16 GB
- Interface: RS -232
- Incl. ISO calibration
Manufacturer: PCE Instruments
£ 243.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-HVAC 3-ICA

PCE-HVAC 3 is a environmental tester or diagnostic measuring device used for indoor climate and environmental monitoring. In addition to measuring relative humidity and ambient room / dry-bulb temperature, the environmental tester calculates dew-point and wet-bulb temperatures in degrees Celsius (°C) and Fahrenheit (°F). Thus, heating, ventilation and air conditioning (HVAC) installations and HVAC system performance assessments are key applications of the PCE-HVAC 3 environmental tester.


- Relative humidity measuring range: 0 ... 100% RH
- Ambient / dew-point temp. range: -30 ... 100°C / -22 ... 212°F
- Wet-bulb temp. range: 0 ... 80°C / 32 ... 176°F
- Incl. ISO calibration certificate

Manufacturer: PCE Instruments
£ 245.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-RCM 11
The environmental tester PCE-RCM 11 serves as an indicative test of environmental parameters. The environmental tester PCE-RCM 11 enables the measurement of fine dust, temperature and relative humidity. The bright display of the environmental tester provides information about the already mentioned parameters. 

- Fine dust, formaldehyde, humidity, temperature, TVOC
- Particle size channels : PM 2.5 / PM 10
- Measuring range TVOC: 0.00 ... 9.99 mg / m³ (volatile organic compounds)
- Measuring range temperature: -20 ... 70°C / -4 ... 158°F
- Measuring range humidity: 0 ... 100% RH
- Measuring range formaldehyde: 0.00 ... 5.00 mg / m³
- Interface: USB
- For indicative measurements
Manufacturer: PCE Instruments
£ 245.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-PH 25
The environmental tester PCE-PH 25 offers the user comprehensive measuring applications. In addition to determining the pH value, the PCE-PH 25 environmental tester also shows the conductivity, the filtrate dry residue, the salinity and the temperature of the sample. The environmental tester PCE-PH 25 is a measuring instrument for mobile use.

- Measuring range: 0.00 ... 14.00 pH
- Resolution: 0.01 pH
- Accuracy: ± 0.01 pH
- Measurement data memory for 50 data sets
- Self-calibration possible
- Display of salinity and conductivity
Manufacturer: PCE Instruments
£ 254.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-172-ICA

The PCE-172 environmental tester is used for accurate measuring of brightness in the industrial sector, commercial sector, agricultural sector, and for research.


- Range: 40 ... 400,000 lux
- Accuracy: ± 5% of reading ± 10 digits (10,000 lux)
- 3.5-digit LCD display
- Incl. ISO Calibration Certificate

Manufacturer: PCE Instruments
£ 262.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-228SLUR
The environmental tester PCE-228SLUR is a very easy-to-use pH / mV / °C / °F handheld instrument. The pH value and the temperature can be stored directly on the SD card (Excel file) or transferred via the RS-232 interface directly from the environmental tester to a PC. You can buy the environmental tester PCE-228SLUR here in our shop online.

- Measuring range: 0.00 ... 14.00 pH
- Resolution: 0.01 pH
- Accuracy: ± (0.02 pH + 2d)
- Memory: flexible via SD card memory 1 ... 16 GB
- Interface: RS -232
- Especially for measurements in mud and soil
Manufacturer: PCE Instruments
£ 262.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-423N-ICA
The environmental tester has a measuring range of up to 0 ... 30 m/s. In addition to the velocity, the environmental tester can precisely measure the volume flow and temperature. The compact design of the sensors, in combination with the extendable telescopic probe, enable measurements to be taken even in places that are particularly difficult to access.

- Speed: 0.00 ... 30.00 m/s / 0.00 ... 98.42 ft/s
- Volume flow: 0.0 ... 339120.0 m3/h
- Temperature: 0 ... 50 °C / 32 ... 122 °F
- Telescopic probe length: 210 ... 426 mm / 8.2 ... 16.7"
- Telescopic probe diameter: 12 mm / 0.47"
- incl. ISO Calibration Certificate
Manufacturer: PCE Instruments
£ 265.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-228LIQ
The environmental tester PCE-228LIQ is a very easy-to-use pH / mV / °C / °F handheld instrument. The pH value and the temperature can be stored directly on the SD card (Excel file) or transferred directly from the environmental tester to a PC via the RS-232 interface. You can buy the environmental tester PCE-228LIQ here in our shop.

- Measuring range: 0.00 ... 14.00 pH
- Resolution: 0.01 pH
- Accuracy: ± (0.02 pH + 2d)
- Memory: flexible via SD card memory 1 ... 16 GB
- Interface: RS -232
- Especially for beer, blood, and dairy products
Manufacturer: PCE Instruments
£ 267.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-AQD 10
The environmental tester PCE-AQD 10 is used to measure air quality. The environmental tester measures carbon dioxide, temperature and humidity. The CO2 sensor from the environmental tester is disconnected from the main unit with a connection cable.

- Measuring range: 0 ... 4000 ppm
- Measuring range: 10 ... 90% rh
- Measuring range: 0 ... 50°C / 32 ... 122°F
- Memory on SD card
- 3 parameters of air quality
- CO2, air temperature and humidity
Manufacturer: PCE Instruments
£ 280.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-HVAC 3S-ICA
The environmental tester PCE-HVAC 3S-ICA is a multifunctional diagnostic device for climate testing. In addition to the ambient humidity and room temperature, the environmental tester also determines the dew point and wet bulb temperature in °C and °F.

- Measuring ranges
   Air humidity: 0 ... 100% RH
   Absolute humidity: 0 ... 500 g/m³
   Temperature: -30 ... 100°C / -22 ... 212°F
   Dew point temperature: -30 ... 100°C / -22 ... 212°F
   Wet bulb temperature: 0 ... 80°C / 32 ... 176°F
- Accuracy
   Humidity: ± 2% (40 ... 60% RH)
   Temperature: ± 0.5°C / 0.9°F (20 ... 60°C / 68 ... 140°F)
- HOLD and extreme value display
- Including sinter filter
- Including ISO Calibration Certificate
Manufacturer: PCE Instruments
£ 284.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-330

PCE-330 is an environmental tester or meter with a quick-response sensor for determining ambient temperature, relative humidity and dew point temperature. Equipped with an easy-to-read dual display, this data-logging indoor air quality (IAQ) meter features a large internal memory with storage for up to 16,000 recorded values.


- Temperature range: -20 ... 60°C / -4 ... 140°F
- Relative humidity range: 0 ... 100% RH
- Resolution: 0.1° / 0.18°F
- Accuracy: ± 0.8°C / ± 1.5°F, ± 2.0 ... 4.0% RH
- Internal memory: up to 16,000 date- and time-stamped readings

 

Manufacturer: PCE Instruments
£ 289.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-PH 25-ICA
The environmental tester PCE-PH 25-ICA offers the user comprehensive measuring applications. In addition to determining the pH value, the environmental tester also shows the conductivity, the filtrate dry residue, the salinity and the temperature of the sample. The environmental tester is a measuring instrument for mobile use.

- Measuring range: 0.00 ... 14.00 pH
- Resolution: 0.01 pH
- Accuracy: ± 0.01 pH
- Measurement data memory for 50 data sets
- Self-calibration possible
- Display of salinity and conductivity
- incl. ISO Calibration Certificate (only for pH value)
Manufacturer: PCE Instruments
£ 297.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-228SLUR-ICA
The environmental tester PCE-228SLUR-ICA is a very easy-to-use pH / mV / °C / °F handheld instrument. The pH value and the temperature can be stored directly on the SD card (Excel file) or transferred directly from the environmental tester to a PC via the RS-232 interface. You can buy the environmental tester PCE-228SLUR-ICA here in our shop.

- Measuring range: 0.00 ... 14.00 pH
- Resolution: 0.01 pH
- Accuracy: ± (0.02 pH + 2d)
- Memory: flexible via SD card memory 1 ... 16 GB
- Interface: RS -232
- Especially for measurements in mud and earth
- Incl. ISO calibration
Manufacturer: PCE Instruments
£ 303.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-228LIQ-ICA
The environmental tester PCE-228LIQ-ICA is a very easy-to-use pH / mV / °C / °F handheld instrument. The pH value and the temperature can be stored directly on the SD card (Excel file) or transferred directly from the environmental tester to a PC via the RS-232 interface. You can buy the environmental tester PCE-228LIQ-ICA here in our shop.


- Measuring range: 0.00 ... 14.00 pH
- Resolution: 0.01 pH
- Accuracy: ± (0.02 pH + 2d)
- Memory: flexible via SD card memory 1 ... 16 GB
- Interface: RS -232
- Especially for beer, blood, milk products
- Incl. ISO calibration 
Manufacturer: PCE Instruments
£ 307.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-EMF 40
With the environmental tester PCE-EMF 40, it is possible to measure magnetic fields up to 2000 mG directly. At the same time, the environmental tester shows the strength of the magnetic field numerically using an X, Y and Z axis.

- Measuring ranges: 20.00 ... 200.0 µT / 200.0 ... 2000 mG
- Bandwidth: 50 MHz ... 3.5 GHz
- Units: V / m, mV / m, V / m, µW / cm², µW / m², mW / m², mA / m
Manufacturer: PCE Instruments
£ 307.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-G 2
The Environmental Tester PCE-G 2 is used to measure the environmental parameters of temperature and humidity. The environmental tester is used in warehouses, open-plan offices, schools, etc.

- Measuring range temperature: -40 ... 85 °C
- Measuring range humidity: 0 ... 99 % r.H.
- 55 mm character height
- Up to 30 m reading distance
- External sensor (wired)
Manufacturer: PCE Instruments
£ 307.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-MFM 3500
The electromagnetic environmental tester is a reliable measuring device for measuring the existing magnetic field. This electromagnetic environmental tester is for measuring both static/permanent magnet (DC) and alternating magnetic (AC) fields.

Measuring range up to 30,000 G
- DC Milli Tesla, DC Gauss, Transverse Probe
- AC Milli Tesla, AC Gauss, frequency from 40 to 500 Hz
- Temperature sensor
- Switchable AC or DC measurement
- Memory: Manual / Automatic
Manufacturer: PCE Instruments
£ 311.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-AQD 50
The environmental tester is specially designed for long-term monitoring of climatic conditions in, for example, offices, classrooms or lecture halls. The environmental tester is equipped with various sensors.

Parameters / Measuring ranges:
- Temperature: 0 ... +50 ºC / 32 ... 122 ºF
- Ambient humidity: 0 ... 100% RH
- Atmospheric pressure: 300 ... 2000 hPa
- CO2: 0 ... 40000 ppm
- 32 GB data storage
- E-paper display with histogram display
- Good / medium / bad rating
- Battery life: approx. 10 months
Manufacturer: PCE Instruments
£ 319.00

Price excl. VAT &. delivery
2 year Warranty

Order no.: PCE-HT 300
The environmental tester PCE-HT 300 is a laboratory data logger for temperature, dew point and humidity. The environmental tester stores the measurement data on an internal 16 GB memory in CSV format. 

Measuring function
- Temperature: -10 ... 80°C / 14 ... 176°F
- Dew point: -10 ... 80°C / 14 ... 176°F
- Humidity: 0 ... 100% RH
- 16 GB of memory
- Storage as CSV
Manufacturer: PCE Instruments
£ 320.00

Price excl. VAT &. delivery
2 year Warranty