Environmental Meter PCE-MPC 15
£ 618.00
Price excl. VAT &. delivery
2 year Warranty
The environmental meter is used in offices, workshops or in laboratories to carry out indicative measurements of the environmental conditions. In addition to the number of particles, the environmental meter determines the mass concentration of PM2.5 and PM10 in the measuring range 0 … 1000 µg/m³.

- Measurable particle sizes: PM2.5 / PM10
- Particle sizes: 0.3 / 2.5 µm
- Mass concentration
- Particle counter
- Temperature
- Humidity (RH)
- Flash memory for approx. 12 measurement runs
Environmental Meter PCE-428-EKIT
£ 3,627.00
Price excl. VAT &. delivery
2 year Warranty

The environmental meter PCE-428-EKIT, from the field of environmental measurement technology, is an optimal sound level meter for measurements at workplaces, construction sites, in traffic, airports, etc. The environmental meter is a class 2 device and is equipped with an octave band frequency filter. Optionally, the environmental meter PCE-428-EKIT can be upgraded with a 1/3 octave band filter. The additional kit for outdoor sound measurement makes it possible to measure outdoor noise with a SPL meter over a long period of time, even in the rain.

 

- Accuracy class 2 
- A, B, C & Z frequency rating
- Fast, Slow, Pulse and Peak time weighting
- Statistics function
- 1/1 octave band included
- 1/3 octave band optional
- incl. outdoor noise level meter kit PCE-4xx-EKIT
- Outdoor measurement of sound and noise

Environmental Meter PCE-RCM 12
£ 409.00
Price excl. VAT &. delivery
2 year Warranty
The environmental meter PCE-RCM 12 is used for indicative testing of environmental parameters. The environmental meter PCE-RCM 12 enables the measurement of CO2, fine dust, temperature and relative humidity. The bright display of the environmental meter provides information about these parameters. 


- Fine dust, CO2, formaldehyde, humidity, temperature
- Particle size channels: PM 2.5 / PM 10
- Temperature measuring range: -20 ... 70°C / -4 ... 158°F
- Humidity measuring range: 0 ... 100% r.H.
- Formaldehyde measuring range: 0.00 ... 5.00 mg/m³
- CO2 measuring range: 0 ... 9999 ppm
- For indicative measurements
Environmental Meter PCE-LMD 100
£ 3,320.00
Price excl. VAT &. delivery
2 year Warranty
The environmental meter is designed for measuring the luminance of self-illuminating surfaces, such as monitor matrices, TV sets, negatoscopes, reading panels, etc. The environmental meter guarantees an accurate measurement, regardless of the spatial distribution of the measured luminance or the backlighting of the surface to be tested.

- Measurement range: 0.00 ... 50000 cd/m²
- Resolution: 0.01 cd/m²
- Accuracy class:
  A in accordance with DIN 5032-7
- External sensor with multifunction button
- 8 GB measured value memory
Leak Detector PCE-LDC 15
£ 2,935.00
Price excl. VAT &. delivery
2 year Warranty
The leak detector is used in various areas of industry. For example, the leak detector is used on compressed air, gas, steam and vacuum systems, as well as on refrigeration systems and door seals.

- Working frequency: 40 kHz (± 2 kHz)
- Operating time: >10 hours
- Various attachments
- Color display: 3.5" touch panel TFT
- Soundproof headphones
NDT Tester PCE-LDC 15
£ 2,935.00
Price excl. VAT &. delivery
2 year Warranty
The NDT tester is used in various areas of industry. For example, the NDT tester is used on compressed air, gas, steam and vacuum systems, as well as on refrigeration systems and door seals.

- Working frequency: 40 kHz (± 2 kHz)
- Operating time: >10 hours
- Various attachments
- Color display: 3.5" touch panel TFT
- Soundproof headphones
Gas Detector PCE-LDC 15
£ 2,935.00
Price excl. VAT &. delivery
2 year Warranty
The gas detector is used in various areas of industry. For example, the gas detector is used on compressed air, gas, steam and vacuum systems, as well as on refrigeration systems and door seals.

- Working frequency: 40 kHz (± 2 kHz)
- Operating time: >10 hours
- Various attachments
- Color display: 3.5" touch panel TFT
- Soundproof headphones
Environmental Meter PCE-428-EKIT-ICA incl. ISO Calibration Certificate
£ 3,693.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration

The environmental meter PCE-428-EKIT-ICA, from the field of environmental measurement technology, is an optimal sound level meter for measurements at workplaces, construction sites, in traffic, airports, etc. The environmental meter is equipped with an octave band frequency filter. Optionally, the environmental meter can be upgraded with a 1/3 octave band filter. The additional kit for outdoor sound measurement makes it possible to measure outdoor noise with an environmental meter over a long period of time, even in the rain.

 

- Accuracy class 2 
- A, B, C & Z frequency rating
- Fast, Slow, Pulse and Peak time weighting
- Statistics function
- 1/1 octave band included
- 1/3 octave band optional
- incl. outdoor noise level meter kit PCE-4xx-EKIT
- Outdoor measurement of sound and noise
- incl. ISO calibration certificate

Environmental Meter PCE-RCM 11
£ 311.00
Price excl. VAT &. delivery
2 year Warranty
The environmental meter PCE-RCM 11 serves as an indicative test of environmental parameters. The environmental meter PCE-RCM 11 enables the measurement of fine dust, temperature and relative humidity. The bright display of the environmental meter provides information about the already mentioned parameters. 

- Fine dust, formaldehyde, humidity, temperature, TVOC
- Particle size channels : PM 2.5 / PM 10
- Measuring range TVOC: 0.00 ... 9.99 mg / m³ (volatile organic compounds)
- Measuring range temperature: -20 ... 70°C / -4 ... 158°F
- Measuring range humidity: 0 ... 100% RH
- Measuring range formaldehyde: 0.00 ... 5.00 mg / m³
- Interface: USB
- For indicative measurements
Environmental Meter PCE-430
£ 1,913.00
Price excl. VAT &. delivery
2 year Warranty
The class 1 data-logging environmental meter meets all requirements for noise measurement and frequency analysis. This integrating precision pulse environmental meter complies with all applicable standards and guidelines.

- Accuracy class 1
- A, B, C & Z frequency weighting
- Fast, Slow, Impulse and Peak time weighting
- Statistics function
- 1/1 octave band included
- 1/3 octave band optional
Environmental Tester PCE-MPC 15
£ 618.00
Price excl. VAT &. delivery
2 year Warranty
The environmental tester is used in offices, workshops or in laboratories to carry out indicative measurements of the environmental conditions. In addition to the number of particles, the environmental tester determines the mass concentration of PM2.5 and PM10 in the measuring range 0 … 1000 µg/m³.

- Measurable particle sizes: PM2.5 / PM10
- Particle sizes: 0.3 / 2.5 µm
- Mass concentration
- Particle counter
- Temperature
- Humidity (RH)
- Flash memory for approx. 12 measurement runs
Gas Leak Detector PCE-LDC 15
£ 2,935.00
Price excl. VAT &. delivery
2 year Warranty
The gas leak detector is used in various areas of industry. For example, the gas leak detector is used on compressed air, gas, steam and vacuum systems, as well as on refrigeration systems and door seals.

- Working frequency: 40 kHz (± 2 kHz)
- Operating time: >10 hours
- Various attachments
- Color display: 3.5" touch panel TFT
- Soundproof headphones
Gas Leak Detector PCE-LDC 15
£ 2,935.00
Price excl. VAT &. delivery
2 year Warranty
The condition monitoring gas leak detector is used in various areas of industry. For example, the gas leak detector is used on compressed air, gas, steam and vacuum systems, as well as on refrigeration systems and door seals.

- Working frequency: 40 kHz (± 2 kHz)
- Operating time: >10 hours
- Various attachments
- Color display: 3.5" touch panel TFT
- Soundproof headphones
Environmental Meter PCE-RCM 16
£ 249.00
Price excl. VAT &. delivery
2 year Warranty
The environmental meter PCE-RCM 16 is ideal for monitoring the air quality in homes, businesses or public buildings where people are staying. The 4.3-inch TFT display on the environmental meter PCE-RCM 16 is dimensioned so that all measured values ​​can be read directly.

Metrics
- TVOC: 0.000 ... 9.999 mg / m³
- PM1, PM 2.5, PM10: 0 ... 999 μg / m³
- Temperature: 0 ... 50°C / 32 ... 122°F
- Humidity: 20 ... 90% rh
- CO2: 0 ... 5000 ppm
Ultrasonic Leak Detector PCE-LDC 15
£ 2,935.00
Price excl. VAT &. delivery
2 year Warranty
The ultrasonic leak detector is used in various areas of industry. For example, the ultrasonic leak detector is used on compressed air, gas, steam and vacuum systems, as well as on refrigeration systems and door seals.

- Working frequency: 40 kHz (± 2 kHz)
- Operating time: >10 hours
- Various attachments
- Color display: 3.5" touch panel TFT
- Soundproof headphones
Environmental Tester PCE-RCM 12
£ 409.00
Price excl. VAT &. delivery
2 year Warranty
The environmental tester PCE-RCM 12 is used for indicative testing of environmental parameters. The environmental tester PCE-RCM 12 enables the measurement of CO2, fine dust, temperature and relative humidity. The bright display of the environmental tester provides information about these parameters. 


- Fine dust, CO2, formaldehyde, humidity, temperature
- Particle size channels: PM 2.5 / PM 10
- Temperature measuring range: -20 ... 70°C / -4 ... 158°F
- Humidity measuring range: 0 ... 100% r.H.
- Formaldehyde measuring range: 0.00 ... 5.00 mg/m³
- CO2 measuring range: 0 ... 9999 ppm
- For indicative measurements
Environmental Meter PCE-LMD 200-LD-KIT incl. luminance accessory
£ 3,070.00
Price excl. VAT &. delivery
2 year Warranty
The environmental meter is a precise measuring instrument that fulfils the highest requirements for light measurements. In accordance with DIN 5032-7, it fulfils the requirements of precision class A, which enables accurate and reliable measurement of light intensities. With an impressive measuring range of 0.000 lux to 500,000 lux, the environmental meter is extremely versatile.

- Measuring range: 0.000 lx ... 500 klux
- Resolution: 0.001 lx
- Precision in accordance with DIN 5032-7
- Accuracy class: A
- External sensor
- 8 GB measured value memory
incl. luminance accessory
Environmental Meter PCE-LMD 200
£ 1,803.00
Price excl. VAT &. delivery
2 year Warranty
The environmental meter is a precise measuring instrument that fulfils the highest requirements for light measurements. In accordance with DIN 5032-7, it fulfils the requirements of precision class A, which enables accurate and reliable measurement of light intensities. With an impressive measuring range of 0.000 lux to 500,000 lux, the environmental meter is extremely versatile.

- Measuring range: 0.000 lx ... 500 klux
- Resolution: 0.001 lx
- Precision in accordance with DIN 5032-7
- Accuracy class: A
- External sensor
- 8 GB measured value memory