Environmental Meter

Order no.: PCE-VOC 1

PCE-VOC 1 is a portable handheld volatile organic compound (VOC) and formaldehyde (HCHO) meter or gas leak detector for indoor air quality (IAQ) monitoring applications. This easy-to-use VOC meter is ideal for measuring total volatile organic compound (TVOC) and formaldehyde (HCHO) levels in homes, offices, factories, laboratories, hotels, schools and other indoor environments.


- TVOC range: 0.00... 9.99 ppm
- HCHO range: 0.00... 5.00 ppm
- Displays units in ppm or mg/m³
- Audible and visual alarms
- Long-lasting rechargeable battery

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PH 23
The environmental meter PCE-PH 23 is used for rapid fluid analysis. The environmental meter offers the possibility of determining the temperature and the pH value. The operation of the environmental meter PCE-PH 23 is carried out via the four front-mounted buttons.

- Measuring range pH measurement: 0.00 ... 14.00 pH
- Resolution pH measurement: 0.01 pH
- Measurement accuracy pH measurement: ± 0.02 pH ± 1 digit
- Graphic display
- 1-, 2- or 3-point calibration
- Four front panel buttons
- Memory (Save & Recall)
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-RCM 15
The environmental meter PCE-RCM 15 is specially designed to monitor the quality of indoor air. Among other things, the environmental meter measures the parameters for PM1, PM2.5, PM10, TVOC, formaldehyde, humidity and temperature. 

 

Measured quantity:
- Formaldehyde: 0 ... 1,999 mg / m³
- TVOC: 0 ... 9,999 mg / m³
- PM1, PM2.5, PM10: 0 ... 999 μg / m³
- Temperature: -10 ... 45°C / 14 ... 113°F (Only displays in °C) 
- Humidity: 20 ... 99% RH
- 3 different display modes
- Alarm function

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PH 28L
The Environmental Meter PCE-PH 28L is equipped with a flat electrode membrane which is installed in a shaft. So with the environmental meter you can measure samples of viscous media in test tubes. This feature makes it possible to use very small volumes of liquids in beakers or test tubes. As a result, the environmental meter can be used not only in the field but also in the laboratory.

- Calibration points: 1, 2 or 3
- Measuring range: -1 ... 15 pH
- Temperature measuring range: 0.0 ... 60°C / 32 ... 140°F  
- Flat pH electrode with long shaft
- Automatic temperature compensation
- For small sample quantities
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-RCM 16
The environmental meter PCE-RCM 16 is ideal for monitoring the air quality in homes, businesses or public buildings where people are staying. The 4.3-inch TFT display on the environmental meter PCE-RCM 16 is dimensioned so that all measured values ​​can be read directly.

Metrics
- TVOC: 0.000 ... 9.999 mg / m³
- PM1, PM 2.5, PM10: 0 ... 999 μg / m³
- Temperature: 0 ... 50°C / 32 ... 122°F
- Humidity: 20 ... 90% rh
- CO2: 0 ... 5000 ppm / m³
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-HT 112-ICA
The environmental meter PCE-HT 112 is compact, very small and equipped with a display. The PCE-HT 112 environmental meter records the temperature and humidity indoors with its integrated sensor and simultaneously displays it via the LCD display.

Measuring function
- Temperature: -30 ... 65°C / -22 ... 149°F (Internal)
                          -40 ... 125°C / -40 ... 257°F (external)
- Humidity: 0 ... 100% RH (Internal & External)
- Memory for 25,920 readings
- Saves as PDF
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-G28

PCE-G28 is a portable, handheld environmental electromagnetic field radiation meter or gauss meter that detects electromagnetic fields (EMFs) and displays measurement results in milliGauss (mG) or microTesla (µT). This EMF radiation detector comes with an external 3-axis electromagnetic sensor (X, Y, Z direction).


- Measurement range: 0 ... 20000 mG / 0 ... 2000 µT
- Accuracy: ± 4% + 3 digits / ± 5% + 3 digits / ± 10% + 5 digits
- Resolution: 0.1 mG / 0.01 µT


Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-313A

The PCE-313 A Environmental Meter measures relative humidity and temperature and can be used in the air-conditioning sector. The PCE-313 A Environmental Meter can be connected to type K thermo-elements to detect, for instance, the temperature of a wall by means of a surface probe. The internal memory of this test equipment allows the Environmental Meter to record humidity and temperature data at an adjustable measurement interval. Thanks to its SD memory card (1 to 16 GB) the humidity test instrument can be used for long term data acquisition. The meter comes manufacturer calibrated (ISO or as an option).


- Relative humidity: 5 ... 95% r.H.
- Temperature: 0 ... 50°C / 32 ... 122°F
- Type K: -50 ... 1300°C / -58 ... 2372°F
- Calculated dew point: -25.3 ... 48.9°C / -13.5 ... 120°F
- Wet bulb temperature: -21 ... 50°C / -5.8 ... 122°F
- Memory: SD card (1 ... 16 GB)

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PDR 10
The PCE-PDR 10 environmental meter is a pressure measurement gauge. Up to three pressure sensors can be connected to this environmental meter and synchronously read out and logged. Thanks to the 4 ... 20-mA input signal, many different pressure sensors can be connected. 

- 4 ... 20-mA measuring signal
- Intelligent storage system
- Connection to a PC via RS232
- Wall mounting for permanent installation
- SD card slot for up to 16GB
- Measurement of three pressure sensors simultaneously
- Sensors must be selected as an option!
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-HT 114-ICA
The refrigerator environmental meter PCE-HT 114 has a temperature and humidity sensor on 2 m / 6.6 ft cable. The PCE-HT 114 environmental meter records the temperature and humidity in the interior of the refrigerator and simultaneously displays it via the LCD display.

Measuring function
- Temperature: -40 ... 125°C / -40 ... 257°F (external)
- Humidity: 0 ... 100% rh (external)
- Memory for 25,920 readings
- Saves as PDF
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-THB 38-ICA

The PCE-THB 38 environmental meter is ideal for detecting and digitally displaying humidity, temperature and barometric pressure. Temperature is measured by an RTD sensor and air humidity is measured by a highly repeatable, capacitive sensor. All products are test instruments, and the environmental meter is sent out manufacturer calibrated. An ISO certification is available optionally.


- Temperature: 0 ... 50°C / 32 ... 122°F
- Relative air humidity: 10 ... 95% r.h.
- Barometric pressure: 10 ... 1100 hPa (mbar) / 0.14 psi ... 16 psi.
- Dew point temperature: -25 ... 49°C / -13 ... 120°F
- Incl. ISO calibration certificate
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-320

With the PCE-320 Environmental Meter it is possible to measure climate conditions such as temperature and relative humidity, as well as determining surface temperature of objects simultaneously by using the included external temperature sensor or using an infrared measurement. The Environmental Meter offers features such as average value, maximum, minimum, and hold functions at a reasonable price.


- Internal probe

- Temperature: -20°C ... 60°C / -4 ... 140°F
- Relative humidity: 10 ... 90% r.H.
- Temperature of global: -22°C ... 60°C / -8 ... 140°F
- Humidity: -68°C ... 60°C / -90 ... 140°F
- Dew point temperature: depending on the sensor

- External probe
- Temperature: -50° C ... 500° C / -58 ... 932°F

 

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-228-ICA
The environmental meter PCE-228-ICA is a very easy-to-use pH / mV / °C /°F handheld instrument. The pH value and the temperature can be stored directly on the SD card (Excel file) or transferred directly from the environmental meter to a PC via the RS-232 interface. You can buy the environmental meter PCE-228-ICA here in our shop.

- Measuring range: 0.00 ... 14.00 pH
- Resolution: 0.01 pH
- Accuracy: ± (0.02 pH + 2d)
- Memory: flexible via SD card memory 1 ... 16 GB
- Interface: RS -232
- Incl. ISO calibration
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-HVAC 3-ICA

PCE-HVAC 3 is a environmental meter or diagnostic measuring device used for indoor climate and environmental monitoring. In addition to measuring relative humidity and ambient room / dry-bulb temperature, the environmental meter calculates dew-point and wet-bulb temperatures in degrees Celsius (°C) and Fahrenheit (°F). Thus, heating, ventilation and air conditioning (HVAC) installations and HVAC system performance assessments are key applications of the PCE-HVAC 3 environmental meter.


- Relative humidity measuring range: 0 ... 100% RH
- Ambient / dew-point temp. range: -30 ... 100°C / -22 ... 212°F
- Wet-bulb temp. range: 0 ... 80°C / 32 ... 176°F
- Incl. ISO calibration certificate

Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-RCM 11
The environmental meter PCE-RCM 11 serves as an indicative test of environmental parameters. The environmental meter PCE-RCM 11 enables the measurement of fine dust, temperature and relative humidity. The bright display of the environmental meter provides information about the already mentioned parameters. 

- Fine dust, formaldehyde, humidity, temperature, TVOC
- Particle size channels : PM 2.5 / PM 10
- Measuring range TVOC: 0.00 ... 9.99 mg / m³ (volatile organic compounds)
- Measuring range temperature: -20 ... 70°C / -4 ... 158°F
- Measuring range humidity: 0 ... 100% RH
- Measuring range formaldehyde: 0.00 ... 5.00 mg / m³
- Interface: USB
- For indicative measurements
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-228LIQ
The environmental meter PCE-228LIQ is a very easy-to-use pH / mV / °C / °F handheld instrument. The pH value and the temperature can be stored directly on the SD card (Excel file) or transferred directly from the environmental meter to a PC via the RS-232 interface. You can buy the environmental meter PCE-228LIQ here in our shop.

- Measuring range: 0.00 ... 14.00 pH
- Resolution: 0.01 pH
- Accuracy: ± (0.02 pH + 2d)
- Memory: flexible via SD card memory 1 ... 16 GB
- Interface: RS -232
- Especially for beer, blood, and dairy products
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-228SLUR
The environmental meter PCE-228SLUR is a very easy-to-use pH / mV / °C / °F handheld instrument. The pH value and the temperature can be stored directly on the SD card (Excel file) or transferred via the RS-232 interface directly from the environmental meter to a PC. You can buy the environmental meter PCE-228SLUR here in our shop online.

- Measuring range: 0.00 ... 14.00 pH
- Resolution: 0.01 pH
- Accuracy: ± (0.02 pH + 2d)
- Memory: flexible via SD card memory 1 ... 16 GB
- Interface: RS -232
- Especially for measurements in mud and soil
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-HT 420
The environmental meter records humidity and air temperature and stores it internally. This compact and robust environmental meter in mini format and with a large memory (up to a maximum of 32,000 values ​​/ 16,000 values ​​per parameter) is mainly used for long-term registration (refrigerated counters in department stores, refrigerated transport, warehouses, PC climate chambers).

- Temperature: -40 ... 70°C / -40 ... 158°F
- Humidity: 0 ... 100%
- Dew point calculation (accuracy ± 2°C / 3.6°F)
- Operating temperature: -40 ... 80°C / -40 ... 176°F, max. 80% rF
- Datalogger for temperature and humidity
- LCD display
- E-mail when value is exceeded
- Ethernet
- Power supply or PoE (selectable)
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-PH 25
The environmental meter PCE-PH 25 offers the user comprehensive measuring applications. In addition to determining the pH value, the PCE-PH 25 environmental meter also shows the conductivity, the filtrate dry residue, the salinity and the temperature of the sample. The environmental meter PCE-PH 25 is a measuring instrument for mobile use.

- Measuring range: 0.00 ... 14.00 pH
- Resolution: 0.01 pH
- Accuracy: ± 0.01 pH
- Measurement data memory for 50 data sets
- Self-calibration possible
- Display of salinity and conductivity
Manufacturer: PCE Instruments
Test Instruments manufacturer
Order no.: PCE-HT 120
The environmental meter PCE-HT 120 is used to measure temperature and humidity. The measurement data from the environmental meter are displayed in an app on the tablet or smartphone and the display.

Measuring function
- Humidity
- Temperature
- Dew point
- Wet bulb temperature
- Ethernet: WLAN / WIFI
- Accespoint and client mode
- Connection for external PT1000 sensor
Manufacturer: PCE Instruments
Test Instruments manufacturer