Electrical Tester PCE-PA 8500
£ 2,916.00
Price excl. VAT &. delivery
2 year Warranty
The electrical tester redefines standards in electrical measurement technology, offering a comprehensive range of features for precise and detailed measurements. The electrical tester allows accurate measurements of electrical voltage, current, frequency, harmonics, and starting currents. In addition, precise power and energy measurements can be performed, enabling accurate monitoring and optimization of energy consumption.

- Voltages: 1 ... 1000 V
- Current: 15 ... 3000 A AC
- Graphical representation of waveform and vector graphics
- Data logger with 8 GB storage
- LAN and USB data interface
- Includes flexible current clamps
- Compliance with standards: IEC61000-4-30, 61000-4-15, 
  61000-4-7, EN50160
Material Tester for Metals PCE-COM 20
£ 5,229.00
Price excl. VAT &. delivery
2 year Warranty

PCE-COM 20 is a portable handheld non-destructive material tester for non-ferrous metals. This non-destructive testing (NDT) device uses eddy current to determine the electrical conductivity of non-ferrous metals such as aluminum and copper. Includes 3 standards for testing.

 

- Operating frequency: 60 kHz
- Sine wave probe: Ø 14 mm / ≈ 0.55 in 
- Memory: Up to 500 groups of measurements
- Lift-off and temperature compensation
- Automatic calibration

Conductivity Tester for Metals PCE-COM 20
£ 5,229.00
Price excl. VAT &. delivery
2 year Warranty

PCE-COM 20 is a portable handheld non-destructive conductivity tester for non-ferrous metals. This non-destructive testing (NDT) device uses eddy current to determine the electrical conductivity of non-ferrous metals such as aluminum and copper. Includes 3 standards for testing.

 

- Operating frequency: 60 kHz
- Sine wave probe: Ø 14 mm / ≈ 0.55 in
- Memory: Up to 500 groups of measurements
- Lift-off and temperature compensation
- Automatic calibration

Electrical Tester PCE-PA 8500-ICA incl. ISO-Calibration Certificate
£ 3,302.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The electrical tester redefines standards in electrical measurement technology, offering a comprehensive range of features for precise and detailed measurements. The electrical tester allows accurate measurements of electrical voltage, current, frequency, harmonics, and starting currents. In addition, precise power and energy measurements can be performed, enabling accurate monitoring and optimization of energy consumption.

- Voltages: 1 ... 1000 V
- Current: 15 ... 3000 A AC
- Graphical representation of waveform and vector graphics
- Data logger with 8 GB storage
- LAN and USB data interface
- Includes flexible current clamps
- Compliance with standards: IEC61000-4-30, 61000-4-15, 
  61000-4-7, EN50160
- incl. ISO-Calibration Certificate
Electrical Tester PCE-830-2
£ 2,398.00
Price excl. VAT &. delivery
2 year Warranty

The PCE-830-2 Electrical Tester is used for measuring one to three phases of electrical quantities for alternating current (AC). This Electrical Tester also measures parameters such as voltage, current, frequency, harmonics, and power as well as indicating, according to standard EN50160, harmonic values, interharmonics, and asymmetrics. Interference, such as interruptions, leaks, overloads, or transience (from 16 µs) are detected with their corresponding values. The power logging instrument is delivered manufacturer calibrated. An ISO calibration certificate may be ordered optionally.


- PCE-830 + PCE-6802 amp clamp (1000 A)
- Electrical conductor pick-up: 55 mm / 2.1 in diameter
- Range selection: manual (10 A, 100 A, 1000 A)
- Clamp dimensions: 244 mm x 97 mm x 46 mm / 9.6 in x 3.7 in x 1.8 in
- Sampling rate: 2 sec.
- Memory size: 512 kB (max. 52,000 values (single phase)

Electrical Tester PCE-PA 8300-1
£ 2,661.00
Price excl. VAT &. delivery
2 year Warranty

The easy-to-use PCE-PA 8300 Electrical Tester is the ideal tool for performing power and harmonics analysis as well as for measuring network capacity. The PCE-PA 8300 is a 3-phase power analyzer that features:


- Voltage measurement range of 10 V ... 600 V AC
- Current measurement range of (Set 1) 20 A ... 1200 A AC
- Performance measurement range of 0 kW ... 9.999 MW (VA/VAR)
- Simultaneous display of harmonics and waveform
- Graphic Phasor diagram
- Captures transients including dip, swell, and outage

Electrical Tester PCE-PA 8300-2
£ 2,763.00
Price excl. VAT &. delivery
2 year Warranty

The easy-to-use PCE-PA 8300 Electrical Tester is the ideal tool for performing power and harmonics analysis as well as for measuring network capacity. The PCE-PA 8300 is a 3-phase power analyzer that features:


- Voltage measurement range of 10 V ... 600 V AC
- Current measurement range of (Set 2) 30 A ... 3000 A AC
- Performance measurement range of 0 kW ... 9.999 MW (VA/VAR)
- Simultaneous display of harmonics and waveform
- Graphic Phasor diagram
- Captures transients including dip, swell, and outage

Electrical Tester PCE-830-3
£ 2,127.00
Price excl. VAT &. delivery
2 year Warranty

The PCE-830-3 Electrical Tester is used for measuring one to three phases of electrical quantities for alternating current (AC). This Electrical Tester also measures parameters such as voltage, current, frequency, harmonics, and power as well as indicating, according to standard EN50160, harmonic values, interharmonics, and asymmetrics. Interference, such as interruptions, leaks, overloads, or transience (from 16 µs) are detected with their corresponding values. The power logging instrument is delivered manufacturer calibrated. An ISO calibration certificate may be ordered optionally.


- PCE-830 + PCE-3007 flexible amp clamp (3000 A)
- Electrical conductor pick-up: 170 mm / 6.69 in diameter
- Length of electrical conductor: 610 mm / 24.0 in
- Dimensions: 257 mm x 155 mm x 57 mm / 10.1 in x 6.1 in x 2.2 in
- Sampling rate: 2 sec.
- Memory size: 512 kB (max. 52,000 values - single phase)

Electrical Tester PCE-830-1
£ 2,127.00
Price excl. VAT &. delivery
2 year Warranty

The PCE-830 Electrical Tester is used for measuring one to three phases of electrical quantities for alternating current (AC). This Electrical Tester also measures parameters such as voltage, current, frequency, harmonics, and power as well as indicating, according to standard EN50160, harmonic values, interharmonics, and asymmetrics. Interference, such as interruptions, leaks, overloads, or transience (from 16 µs) are detected with their corresponding values. The power logging instrument is delivered manufacturer calibrated. An ISO calibration certificate may be ordered optionally.


- PCE-830 + PCE-6801 amp clamp (100 A)
- Electrical conductor pick-up: 30 mm / 1.1 in diameter
- Range selection: manual (1 A, 10 A, 100 A)
- Clamp dimensions: 210 mm x 62 mm x 36 mm / 8.2 in x 2.4 in x 1.4 in
- Sampling rate: 2 sec.
- Memory size: 512 kB (max. 52,000 values (single phase)

Electrical Tester PCE-360
£ 1,491.00
Price excl. VAT &. delivery
2 year Warranty

The PCE-360 is a Single-Phase Power Meter with data logger functionality. This versatile power analyzer can take single-phase and three-phase power measurements both in real time and over an extended time period.


- Measuring range: 10 ... 999.9 V
- AC voltage AC
- Alternating current AC
- Active power
- Power factor
- Phase angle
- Frequency
- Harmonic measurement
- Data memory: 512 kB 
  (non-volatile memory)
- incl. 4 current clamps / tapping terminals
- Standards: IP 30 / IEC 61 010, 600 V / CAT III
incl. ISO Calibration Certificate 

Electrical Tester PCE-830-2-ICA incl. ISO Calibration Certificate
£ 2,827.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration

The Electrical Tester is used for measuring one to three phases of electrical quantities for alternating current (AC). This Electrical Tester also measures such parameters as voltage, current, frequency, harmonics and power as well as indicating, according to standard EN50160, harmonic values, interharmonics and asymmetrics. Interference, such as interruptions, leaks, overloads or transience (from 16µs) are detected with their corresponding values.


- PCE-830 + PCE-6802 amp clamp (1000 A)
- Electrical conductor pick-up: 55 mm / 2.2 in diameter
- Range selection: manual (10 A, 100 A, 1000 A)
- Clamp dimensions: 244 x 97 x 46 mm / 9.6 x 3.8 x 1.8 in
- Incl. ISO calibration certificate

Electrical Tester PCE-PA 8000
£ 1,624.00
Price excl. VAT &. delivery
2 year Warranty
Topseller

PCE-PA 8000 is a portable handheld power analyzer used for the testing and inspection of 3-phase / 4-wire, 3-phase / 3-wire, 1-phase / 2-wire and 1-phase / 3-wire electrical circuits. This handy power quality analyzer not only measures multiple electrical properties in real time, but also saves the measurement data in .xls format to the included SD card memory for quick and easy data transfer and analysis using Microsoft Excel.

- True RMS measurement for ACA, ACV
- True power: W, KW, MW
- VA, KVA, MVA, VAR, KVAR, MVAR
- PF (power factor), phase angle (Φ)
- KWH, KVAH, KVARH, PFH
- Voltage measurement range: 10 ... 600 ACV
- Current measurement range: 0.2 ... 1200 ACA
- Real-time current, voltage and power consumption measurement
- Built-in data recorder with adjustable sample rate: 2 ... 7,200 sec.

Electrical Tester PCE-830-1-ICA incl. ISO Calibration Certificate
£ 2,554.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration

The Electrical Tester is used for measuring one to three phases of electrical quantities for alternating current (AC). This 3-Phase Electrical Tester also measures such parameters as voltage, current, frequency, harmonics and power as well as indicating, according to standard EN50160, harmonic values, interharmonics and asymmetrics. Interference, such as interruptions, leaks, overloads or transience (from 16µs) are detected with their corresponding values.


- PCE-830 + PCE-6801 amp clamp (100 A)
- Electrical conductor pick-up: 30 mm diameter
- Range selection: manual (1 A, 10 A, 100 A)
- Clamp dimensions: 210 x 62 x 36 mm
- Incl. ISO calibration certificate

Electrical Tester PCE-830-3-ICA incl. ISO Calibration Certificate
£ 2,554.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration

The Electrical Tester is used for measuring one to three phases of electrical quantities for alternating current (AC). This Electrical Tester also measures such parameters as voltage, current, frequency, harmonics and power as well as indicating, according to standard EN50160, harmonic values, interharmonics and asymmetrics. Interference, such as interruptions, leaks, overloads or transience (from 16µs) are detected with their corresponding values.


- PCE-830 + PCE-3007 flexible amp clamp (3000A)
- Electrical conductor pick-up: 170 mm / 6.7 in diameter
- Minimum radial curve: 35 mm / 1.4 in
- Length of electrical conductor: 610 mm / 24 in
- Sampling rate: 2 sec.
- Memory size: 512 kB / max. 52,420 data (1 phase)
- Incl. ISO calibration certificate

Conductivity Tester for Metals PCE-COM 20-ICA incl. ISO Calibration Certificate
£ 5,367.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration

PCE-COM 20-ICA is a portable handheld non-destructive conductivity tester for non-ferrous metals. This non-destructive testing (NDT) device uses eddy current to determine the electrical conductivity of non-ferrous metals such as aluminum and copper. Includes 3 standards for testing.

 

- Operating frequency: 60 kHz
- Sine wave probe: Ø 14 mm / ≈ 0.55 in 
- Memory: Up to 500 groups of measurements
- Lift-off and temperature compensation
- Automatic calibration
- incl. ISO Calibration Certificate

Material Tester for Metals PCE-COM 20-ICA incl. ISO Calibration Certificate
£ 5,367.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration

PCE-COM 20-ICA is a portable handheld non-destructive material tester for non-ferrous metals. This non-destructive testing (NDT) device uses eddy current to determine the electrical conductivity of non-ferrous metals such as aluminum and copper. Includes 3 standards for testing.

 

- Operating frequency: 60 kHz
- Sine wave probe: Ø 14 mm / ≈ 0.55 in 
- Memory: Up to 500 groups of measurements
- Lift-off and temperature compensation
- Automatic calibration
- incl. ISO Calibration Certificate

Automotive Tester / Borescope PCE-VE 260HT
£ 36,306.00
Price excl. VAT &. delivery
2 year Warranty
Topseller
The borescope offers an advanced solution for visual inspection in extreme environments with temperatures of up to 300 °C. With a specially developed high-temperature camera cable, it enables reliable image and video recording even under extreme conditions. The integrated connection on the camera cable for air cooling ensures effective cooling during use.

- High-temperature camera cable up to 300 °C
- Length of camera probe: 2 m
- Diameter of camera probe: 6 mm
- Connection for air cooling
- 4-way camera head
- Illumination via LED fibre optics
- HDMI image transmission
- 32 GB micro SD card memory
NDT Tester PCE-LDC 20
£ 4,445.00
Price excl. VAT &. delivery
2 year Warranty
The NDT tester for gas pressure systems is an effective solution for detecting and evaluating leaks in compressed air and other non-explosive gas pressure systems. The measured leaks can be recorded and analysed within the software, the escape of compressed air causes high electricity costs as compressors run more than they should.

Units: bar, psi, MPa, l/min, m³/h, cfm
Leak detection in compressed air, refrigerant
  and gas systems

- Leakage assessment
- Various attachments
- Wireless headphones
- Frequency: 38 . .. 42 kHz
- Measurement rate: 1 Hz
- Memory capacity: 1 GB