Durometer PCE-3000U

Order no.: PCE-3000U

£ 2,443.00
£ 2,931.60
price ex. (VAT / delivery)
Delivery time: Not in stock!
Mobile UCI durometer PCE-3000U
Hardness scales HRC, HB and HV / NDT device for determining the tensile strength Rm suitable for components up to a thickness of 1 mm

The UCI hardness tester PCE-3000 can be used to quickly check the hardness of components even when installed. The device impresses with its large measuring range, easy handling, robust design and temperature resistance down to -20°C / -4°F. In addition to the hardness in Rockwell, Brinell and Vickers, the UCI hardness tester can also be used to determine the tensile strength of steels up to 1740 MPa. The UCI hardness tester has a manual test probe with a test force of 50 N / 11.2 lbs as standard; this probe can be used for measurements from all directions in space without a correction factor.

Another advantage of the hardness tester is its NDT property. There is a Vickers diamond at the probe tip, which is excited in the ultrasonic frequency range. If the diamond touches the specimen surface during the hardness test, the vibration is dampened. The resulting frequency shift is directly related to the surface hardness of the test piece. Due to the low test forces, the penetration depths of the diamond are very small, which is why only an almost invisible impression remains.

The UCI hardness tester is therefore used for checking small, thin-walled components, for surface-hardened test specimens or for nitrided components. The hardness tester has also proven itself in the measurement of weld seams and control of components with complex geometry.

- Non-destructive hardness testing 
- Different hardness scales 
- 5 materials testable
- Battery operation 
- USB interface 
- Different measuring probes can be connected

Infrared temperature measurement function             Rockwell 20 ... 70 HRC
  Brinell 90 ... 450 HB
  Vickers 230 ... 940 HV
  Tensile strength 370 ... 1740 MPa
Measurement accuracy ± 1.5% HRC
  ± 3% HB
  ± 3% HV
Maximum material roughness 10 N probe: 1.5 Ra
  50 N probe: 2.5 Ra
Maximum radius of curvature of the surface   UCI probes: 5.0 mm
Minimum weight of the test item UCI probes: 0.1 kg
Minimum thickness of the test item UCI probes: 1 mm
Working conditions -20 ... 40°C / -4 ... 104°F
Dimensions Device: 122 x 65 x 33 mm / 4.8 x 2.6 x 1.3 in  
  UCI probe: Ø25 x 140 mm / Ø1 x 5.5 in 
Weight Device: 200 g / < 1 lb
  UCI probe: 250 g / < 1 lb
Power supply 2 x 1.5V battery
Battery life 20 h

1 x UCI durometer PCE-3000U
1 x 50 N / 11.2 lbs UCI probe
2 x 1.5V NiMh battery
1 x Charger
1 x Manual
1 x USB cable