Digital Multimeter PCE-LCT 1-ICA incl. ISO Calibration Certificate
£ 273.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
With the Digital Multimeter, it is possible to measure leakage currents in the range of up to 100A. Leakage occurs when a current flows through an electrical conductor that is not normally designed to conduct electricity. The digital multimeter captures these currents and displays them on the display. 

- Measurable electrical parameters: AC V, AC A, resistance
- Clamp diameter: 30 mm
- Operating temperature: -10 ... 50°C / 50 ... 122°F
- Current consumption: 10-mA
- Incl. ISO calibration certificate
Digital Multimeter PCE-LCT 1
£ 159.00
Price excl. VAT &. delivery
2 year Warranty

Digital Multimeter to test leakage / RMS measurement / continuity and resistance test.


- Measures current up to 100 A
- Measures voltage up to 600 V
- Measures resistance up to 400 O
- Test cables are included

 

Digital Multimeter PCE-GPA 50
£ 671.00
Price excl. VAT &. delivery
2 year Warranty
The PCE-GPA 50 digital multimeter is used to measure the current of 1- or 3-phase loads. This digital multimeter PCE-GPA 50 is particularly characterized by its measuring range up to 2000 A. Another highlight is the graphic display of the digital multimeter.

Measurement functions
- AC voltage AC V
- AC AC
- Power factor (PF)
- Phase angle
- Frequency
- Active, reactive and apparent power
- Harmonic AC V
- AC
- harmonic AC V%
- Absolute harmonic distortion
- Temperature type K thermocouple
Three-Phase Digital Multimeter PCE-GPA 62
£ 845.00
Price excl. VAT &. delivery
2 year Warranty

Three-Phase Digital Multimeter with network analyzer / power and energy meter with data logger. The three-phase harmonic Analyzer (Graphic Power Quality Analyzer) is used for single-phase or three-phase measurements of active, reactive and apparent power, power factor, phase angle, energy, voltage, current as well as peaks and harmonics. This clamp meter is a perfect tool for all energetic measurements. It is delivered manufacturer calibrated and can be certified to ISO or standards.


- Real-time test, register and measurement of voltage and current (real and effective) 
- Measures power factor and phase angle, frequency, energy, active, reactive and apparent power 
  (single-phase or three-phase in symmetrical networks). 
- Max. conductor diameter: 55 mm / 2.2 in
- Records up to 50,000 records


Digital Multimeter PCE-123
£ 493.00
Price excl. VAT &. delivery
2 year Warranty

PCE-123 is a digital multimeter used to test and calibrate a variety of measuring instruments. Offering a high level of accuracy for an affordable price, this easy-to-use multimeter provides electrical (mA, mV, V and frequency in Hz) and temperature (in °C or °F) output signals, making the multimeter useful in a wide range of applications.


- DC current: 4 - 20 mA (1 kΩ load, 24 V loop supply) with 1 μA resolution
- DC voltage: 0 - 100.00 mV, 0 - 1.000 V, 0 - 12.000 V
- K, J, E, T type thermocouples (°C or °F)
- Frequency: 1 - 62,500 Hz

 

Digital Multimeter PCE-GPA 50-ICA incl. ISO Calibration Certificate
£ 853.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The PCE-GPA 50 digital multimeter is used to measure the current of 1- or 3-phase loads. This digital multimeter is particularly characterized by its measuring range up to 2000 A. Another highlight is the graphic display of the digital multimeter.

Measurement functions
- AC voltage AC V
- AC AC
- Power factor (PF)
- Phase angle
- Frequency
- Active, reactive and apparent power
- Harmonic AC V
- AC
- Harmonic AC V%
- Absolute harmonic distortion
- Temperature type K thermocouple
- incl. ISO Calibration Certificate
Digital Multimeter PCE-PCM 3
£ 205.00
Price excl. VAT &. delivery
2 year Warranty
Wireless
With the digital multimeter AC currents of up to 1000 A AC can be measured easily. At the same time, voltages of up to 1000V AC / DC can be measured with the digital multimeter. 

Measuring function
- Current measurement AC
- Inrush current AC
- Voltage measurement DC
- Voltage measurement AC
- Frequency measurement
- Frequency measurement current measurement function
- Frequency measurement voltage measurement function
- Duty cycle
- Resistance measurement
- Continuity test
- Capacity measurement
- Diode measurement
- Single-phase power measurement
- Power factor capacitive / inductive
- Harmonics measurement
Three-Phase Digital Multimeter PCE-GPA 62-ICA incl. ISO Calibration Certificate
£ 958.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration

This three-phase digital multimeter is used for single-phase or three-phase measurements of the active, reactive and apparent power, power factor, phase angle, energy, voltage, current as well as peaks and harmonics up to 50º of the harmonic waveform. The three-phase digital multimeter is equipped with data logger. The test instrument is delivered manufacturer calibrated (ISO or certification as an option).


- Real-time test, register and measurement of voltage and current (real and effective) 
- Measures power factor and phase angle, frequency, energy, active, reactive and apparent power 
  (single-phase or three-phase in symmetrical networks). 
- Max. conductor diameter: 55 mm / 2.2 in
- Datalogger for 50,000 readings / software/ USB interface 
- incl. ISO Calibration Certificate

Digital Multimeter PCE-123-ICA incl. ISO Calibration Certificate
£ 623.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration

PCE-123 is a digital multimeter used to test and calibrate a variety of measuring instruments. Offering a high level of accuracy for an affordable price, this easy-to-use multimeter provides electrical (mA, mV, V and frequency in Hz) and temperature (in °C or °F) output signals, making the multimeter useful in a wide range of applications.


- DC current: 4 - 20-mA (1 kΩ load, 24 V loop supply) with 1 μA resolution
- DC voltage: 0 - 100.00 mV, 0 - 1.000V, 0 - 12.000V
- K, J, E, T type thermocouples (°C or °F)
- Frequency: 1 - 62,500 Hz
- Incl. ISO Calibration Certificate

Digital Multimeter PCE-CM 3-ICA incl. ISO Calibration Certificate
£ 194.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The digital multimeter is used for quick and easy AC measurements. For current measurement, the digital multimeter is plugged over the live conductor. The digital multimeter is particularly suitable for the measurement of alternating current in distributions and wherever circuits must not be interrupted.

- Digital Multimeters up to 200 A
- Compact dimensions
- Robust plastic housing
- Multimeter functions
- Safety conditions: IEC1010-1 (2001)
                             CAT II 1000V
                             CAT III 600V
- Incl. ISO Calibration Certificate
Digital Multimeter PCE-ITM 20
£ 336.00
Price excl. VAT &. delivery
2 year Warranty
This digital multimeter PCE-ITM 20 combines a versatile multimeter with an insulation tester. In addition to the usual measured quantities such as voltage, current and resistance, this digital multimeter PCE-ITM 20 is also equipped with a frequency and capacitance measurement.

- Automatic range selection
- Capacitance measurement
- Integrated isolation tester
- Internal memory
- To IEC 1010, CAT III 1000V, CAT IV 600V
- Frequency measurement
Digital Multimeter PCE-CTI 10
£ 324.00
Price excl. VAT &. delivery
2 year Warranty
The digital multimeter is the ideal measuring device for measuring voltages up to 1500 V AC/DC and currents up to 1000 A AC/DC. The current measurement with the digital multimeter is inductive. To do this, the supply line is placed in the digital multimeter.

- Measuring range: 0 ... 1500 V AC/DC
- Free app for Android and iOS
- Data logging for up to 100,000 measured values
- Inrush current measurement
- Insulation categories: CAT IV 600 V, CAT III 1000 V, CAT II 1500 V
Digital Multimeter PCE-MCM 10-ICA incl. ISO Calibration Certificate
£ 392.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The digital multimeter has a measurement range of ±99.9 mA DC. With an accuracy of 0.3% of rdg. +8 digits, the digital multimeter is a particularly accurate measuring instrument. In order to conveniently perform measurements with the digital multimeter, the digital multimeter itself is connected to a 1 meter / 3.3 ft cable.

- Measuring range 1: ±20.99 mA DC
- Measuring range 2: ±21.0 … ±99.9 mA DC
- Diameter of clamp opening: Ø5 mm
- Detachable digital multimeter with 1 m / 3.3 ft cable
- Incl. ISO Calibration Certificate
Digital Multimeter PCE-MCM 10
£ 254.00
Price excl. VAT &. delivery
2 year Warranty
No-Shopping
The digital multimeter has a measurement range of ±99.9 mA DC. With an accuracy of 0.3% of rdg. +8 digits, the digital multimeter is a particularly accurate measuring instrument. In order to conveniently perform measurements with the digital multimeter, the digital multimeter itself is connected to a 1 meter / 3.3 ft cable.

- Measuring range 1: ±20.99 mA DC
- Measuring range 2: ±21.0 … ±99.9 mA DC
- Diameter of clamp opening: Ø5 mm
- Detachable digital multimeter with 1 m / 3.3 ft cable
Three-Phase Power Meter PCE-830-3
£ 2,127.00
Price excl. VAT &. delivery
2 year Warranty

The Three-Phase Power Meter is used for measuring one to three phases of electrical quantities for alternating current (AC). This Three-Phase Power Meter also measures parameters such as voltage, current, frequency, harmonics, and power as well as indicating, according to standard EN50160, harmonic values, interharmonics, and asymmetrics. Interference, such as interruptions, leaks, overloads, or transience (from 16 µs) are detected with their corresponding values. 


- PCE-830 + PCE-3007 flexible amp clamp (3000 A)
- Electrical conductor pick-up: 170 mm / 6.69 in diameter
- Length of electrical conductor: 610 mm / 24.0 in
- Dimensions: 257 mm x 155 mm x 57 mm / 10.1 in x 6.1 in x 2.2 in
- Sampling rate: 2 sec.
- Memory size: 512 kB (max. 52,000 values - single phase)

Three-Phase Power Analyzer PCE-830-3-ICA incl. ISO Calibration Certificate
£ 2,554.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration

The PCE-830-3 3-Phase Power Meter / 3-Phase Power Analyzer is used for measuring one to three phases of electrical quantities for alternating current (AC). This 3-Phase Power Meter / 3-Phase Power Analyzer also measures such parameters as voltage, current, frequency, harmonics and power as well as indicating, according to standard EN50160, harmonic values, interharmonics and asymmetrics. Interference, such as interruptions, leaks, overloads or transience (from 16µs) are detected with their corresponding values.


- PCE-830 + PCE-3007 flexible amp clamp (3000A)
- Electrical conductor pick-up: 170 mm / 6.7 in diameter
- Minimum radial curve: 35 mm / 1.4 in
- Length of electrical conductor: 610 mm / 24 in
- Sampling rate: 2 sec.
- Memory size: 512 kB / max. 52,420 data (1 phase)
- Incl. ISO calibration certificate

Digital Multimeter PCE-CTI 10-ICA incl. ISO Calibration Certificate
£ 385.00
Price excl. VAT &. delivery
2 year Warranty
ISO Calibration
The digital multimeter is the ideal measuring device for measuring voltages up to 1500 V AC/DC and currents up to 1000 A AC/DC. The current measurement with the digital multimeter is inductive. To do this, the supply line is placed in the digital multimeter.

- Measuring range: 0 ... 1500 V AC/DC
- Free app for Android and iOS
- Data logging for up to 100,000 measured values
- Inrush current measurement
- Insulation categories: CAT IV 600 V, CAT III 1000 V, CAT II 1500 V
- incl. ISO Calibration Certificate
Digital Multimeter PCE-CM 3
£ 80.00
Price excl. VAT &. delivery
2 year Warranty
The digital multimeter is used for quick and easy AC measurements. For current measurement, the digital multimeter is plugged over the live conductor. The digital multimeter is particularly suitable for the measurement of alternating current in distributions and wherever circuits must not be interrupted.

- Digital Multimeters up to 200 A
- Compact dimensions
- Robust plastic housing
- Multimeter functions
- Safety conditions: IEC1010-1 (2001)
                             CAT II 1000V
                             CAT III 600V