Current/Voltage Data Logger PCE-LOC 20

Order no.: PCE-LOC 20
£ 578.00
£ 693.60
4250348718167
PCE-LOC 20
price ex. (VAT / delivery)
Delivery time: 1-2 working days
PCE-LOC 20 Current/Voltage data logger
For Simulation and Measurement of Current and Voltage / Li-Ion battery / Continuity tester / Ramp function / Data logger

The current/voltage data logger PCE-LOC 20 can be used to directly simulate process currents in current loop, mV and mA. This allows the current/voltage data logger to be used to set process displays, data loggers, paperless recorders, etc. Thanks to the galvanically isolated connections, this current/voltage data logger can simultaneously serve as a source and as a measuring device. Here, it does not matter whether currents are measured and voltages are simulated, since the functions work completely independently of each other. 

The current/voltage data logger PCE-LOC 20 has a high accuracy of 0.02% of the measured value in all operating modes. The current/voltage data logger is powered by a rechargeable battery that can be charged via a USB power adapter. The memory can also be read out by the current/voltage data logger via this interface. For ease of operation, the LCD contributes from the current/voltage data logger.

In addition to the direct specification of the simulated parameters, the current/voltage data logger has a ramp mode that allows the parameters to be changed incrementally and automatically over a defined period of time. The current/voltage data logger PCE-LOC 20 can also specify the scaled process value. This means, for example, that a temperature in °C / °F is specified directly and the current/voltage data logger simulates the analog process value in mA.

- Simultaneous simulation and measurement mode
- Battery operation
- For mA, mV and V
- Graphic display
- Supply of sensors possible
- Manual mode & ramp function
- Continuity test
- Data logger function
Measurement parameter
Voltage mV
   
Measuring range Resolution Accuracy
0 ... 250 mV 0.01 mV ± 0.02% of reading + 2 Dgt
     
Voltage DC V    
0 ... 30V 0.001V ± 0.02% of reading + 2 Dgt
     
Current DC mA    
0 ... 24-mA 0.001-mA ± 0.02% of reading + 2 Dgt
     
Simulation parameters    
Voltage mV    
0 ... 250 mV 0.01 mV ± 0.02% of reading + 2 Dgt
     
Voltage DC V    
0 ... 12V 0.001V ± 0.02% of reading + 2 Dgt
     
Current DC mA    
0 ... 24-mA 0.001-mA ± 0.02% of reading + 2 Dgt
     
General Specifications PCE-LOC 20
Display modes Measurement: mA / V / / mV
Simulation: mA / V / / mV
Maximum input voltage 30V DC
Input impedance measurement mV / V:> 1 MΩ
Current measurement: 10 Ω
Response time <100 ms
Load impedance > 10 kΩ at mV / V
<750Ω at mA
Refresh rate display 10 Hz
Isolation 500V DC
Data storage Internal memory
150000 readings
Interface USB 2.0
Display 2.4" TFT LCD
240 x 320 pixels
LED illuminated
Output voltage current loop 24V DC / 24-mA
HART mA loop resistance
250 Ω ± 20%
Special features Step and ramp function
Automatic and manual mode √x, x2: For the measuring function
Continuity test Adjustable threshold up to 100 Ω
Power supply 3.7V / 2300-mAh Li-ion battery
Charging time About 5 h
Power adapter Input: 100 ... 240V AC / 50/60 Hz
Output: 5V / 1 A DC
Battery life Approx. 18 h: Simulation and measurement with low LCD illumination, approx. 8 h: Measurement with low LCD illumination
Dimensions 162 x 82 x 40 mm / 6.4 x 3.2 x 1.6 in
Weight About 300 g / < 1 lb
Degree of protection IP20
Operating conditions Battery operation: 0 ... 55°C / 32 ... 131°F, 30 ... 90% RH Main operation: 0 ... 45°C / 32 ... 113°F, 30 ... 90% RH
Storage conditions -20 .. 60°C / -4 ... 140°F, 30 ... 90% RH non-condensing
Heating time About 15 minutes
   


1 x Current/Voltage Data Logger PCE-LOC 20
2 x Laboratory cables with 2 mm plug
2 x Adapter 2 mm on 4 mm laboratory cable
2 x Alligator clips
1 x Mini USB cable
1 x Power supply 5V / 1 A
1 x Carrying bag
1 x Software
1 x User manual