£ 1,067.00
Price excl. VAT &. delivery
The PCE-IVE 320 is a condition monitoring endoscope, inspection camera, videoscope or industrial borescope that comes with a rigid telescoping pole that extends up to 2.3 m (7.55') in length (3 m long total with camera connection). Plus, the condition monitoring endoscope's 0.3 megapixel camera has a 23 mm (0.91") diameter flexible head with microphone and 12 white LEDs offering adjustable brightness. Includes wheel attachment for under vehicle inspection.
The condition monitoring vibration meter is an ideal measuring device for fast and precise checking of vibrating parts, machines and systems. Various measurement parameters are available for the condition monitoring vibration meter, such as RMS, peak, peak-peak and crest factor.
Measuring ranges
The condition monitoring vibration meter is an ideal measuring device for fast and precise checking of vibrating parts, machines and systems. Various measurement parameters are available for the condition monitoring vibration meter, such as RMS, peak, peak-peak and crest factor.
Measuring ranges
The condition monitoring vibration meter is an ideal measuring device for fast and precise checking of vibrating parts, machines and systems. Various measurement parameters are available for the condition monitoring vibration meter, such as RMS, peak, peak-peak and crest factor.
Measuring ranges
The condition monitoring vibration meter is an ideal measuring device for fast and precise checking of vibrating parts, machines and systems. Various measurement parameters are available for the condition monitoring vibration meter, such as RMS, peak, peak-peak and crest factor.
Measuring ranges
The multiway condition monitoring inspection camera with a cable length of one metre and a camera head diameter of 6 mm is the ideal tool for endoscopy. The LED illuminance on the camera head can be adjusted in 5 steps up to 25,000 lux.
The condition monitoring vibration meter is an ideal measuring device for fast and precise checking of vibrating parts, machines and systems. Various measurement parameters are available for the condition monitoring vibration meter, such as RMS, peak, peak-peak and crest factor.
Measuring ranges
The PCE-VE 350HR is a two-way articulating condition monitoring inspection camera, industrial endoscope, borescope or videoscope for the non-destructive inspection (NDI) of hard-to-reach places. The waterproof camera head of the condition monitoring inspection camera features 6 LED lights (4 front, 2 side) for optimal illumination. In addition, digital image magnification or zoom of up to 2 times is available, plus boost functionality for improved image quality in the dark.
The PCE-VE 350HR3 is a two-way articulating condition monitoring inspection camera, industrial endoscope, borescope or videoscope for the non-destructive inspection (NDI) of hard-to-reach places. The waterproof camera head of the condition monitoring inspection camera features 6 LED lights (4 front, 2 side) for optimal illumination. In addition, digital image magnification or zoom of up to 2 times is available, plus boost functionality for improved image quality in the dark.
The PCE-VE 355N is a two-way articulating condition monitoring inspection camera, industrial endoscope, borescope or videoscope for the non-destructive inspection (NDI) of small components and hard-to-reach places. The camera head of the condition monitoring inspection camera features 5 LED lights with automatic illumination. Pictures and videos are saved to the included 8 GB SD card memory, allowing easy transfer to a PC.
The PCE-VE 380N is a condition monitoring snake camera or inspection camera with a handheld monitor that allows you to gain valuable visual insight into the inner workings of machines and other small spaces such as ventilation ducts, drainpipes and downpipes, sewer pipes, chimneys and more. This semi-flexible / semi-rigid waterproof condition monitoring snake camera is ideal for a variety of industrial and trade applications.
The PCE-VE 355N3 is a two-way articulating condition monitoring inspection camera, industrial endoscope, borescope or videoscope for the non-destructive inspection (NDI) of small components and hard-to-reach places. The camera head of the condition monitoring inspection camera features 5 LED lights with automatic illumination. Pictures and videos are saved to the included 8 GB SD card memory, allowing easy transfer to a PC.
The 4-channel Condition Monitoring Vibration Meter performs vibration measurements on up to 4 places at the same time. The vibration velocity, acceleration, and displacement in a frequency range of 10 Hz to 1 kHz can be measured. The cables of the vibration sensors are 1.2 m / 3.9 ft long, so the Condition Monitoring Vibration Meter is able to record vibrations at different points of the component to be tested.
The 4-channel Condition Monitoring Vibration Meter performs vibration measurements on up to 4 places at the same time. The vibration velocity, acceleration, and displacement in a frequency range of 10 Hz to 1 kHz can be measured. The cables of the vibration sensors are 1.2 m / 3.9 ft long, so the Condition Monitoring Vibration Meter is able to record vibrations at different points of the component to be tested.
The PCE-VE 1030N is a versatile condition monitoring inspection camera with a large 7" high-resolution display. This condition monitoring inspection camera captures and stores both picture and video. Video recordings are accompanied by audio for a more immersive inspection experience.
The two-way optics is a great advantage of the condition monitoring inspection camera. There is easy control of the camera head with the condition monitoring inspection camera. The inspection camera allows you to capture images and videos, and the videos are also stored with an audio recording.
The PCE-VE 370HR is a four-way articulating condition monitoring inspection camera, industrial endoscope, borescope or videoscope for the non-destructive inspection (NDI) of hard-to-reach places. The waterproof camera head of the condition monitoring inspection camera features 6 LED lights (4 front, 2 side) for optimal illumination. In addition, digital image magnification or zoom of up to 2 times is available, plus boost functionality for improved image quality in the dark.
The condition monitoring inspection camera is a versatile inspection instrument. Various inspection camera or endoscope cables with different characteristics can be connected to the condition monitoring inspection camera. A special advantage of the inspection camera is the large display, which offers the user the best possible overview of the area to be viewed due to its dimensions and resolution. The condition monitoring inspection camera allows the recording of pictures and videos, whereby the videos are additionally stored with an audio recording. The clear resolution is also clear when the images are stored in the condition monitoring inspection camera by touching the stylus on the inserted SD card.
The condition monitoring snake camera provides you with new, optical insights into the inner workings of machines and systems as well as in cavities, ventilation ducts, down pipes, chimneys, sewage pipes… The condition monitoring snake camera is the ideal tool for maintenance and repair in any industrial area, craft or workshop.
The two-way optics is a great advantage of the condition monitoring inspection camera. There is easy control of the camera head with the condition monitoring inspection camera. The condition monitoring inspection camera allows you to capture images and videos, and the videos are also stored with an audio recording.
The PCE-VE 370HR3 is a four-way articulating condition monitoring inspection camera, industrial endoscope, borescope or videoscope for the non-destructive inspection (NDI) of hard-to-reach places. The waterproof camera head of the condition monitoring inspection camera features 5 LED lights (3 front, 2 side) for optimal illumination. In addition, digital image magnification or zoom of up to 2 times is available, plus boost functionality for improved image quality in the dark.
The Ultrasonic Contact Impedance (UCI) condition monitoring material tester has been designed for the non-destructive hardness measurement of metallic components. A 136° Vickers diamond at the probe is stimulated with its self-resonance to allow the user to very accurately measure hardness of small items, thin-walled items (>1 mm), and surface-hardened layers. Small imprint after measuring for mirrored surfaces.
In manufacturing and industrial environments, it is not only desirable for people to work 
effectively, but also for production equipment to work effectively. Equipment should be maintained so that downtime due to defective machine components hardly ever occurs. Condition monitoring attempts to predict machine behaviors, starting with a machine's control technology all the way through to the individual machine components. The goal of condition monitoring is to replace components shortly before they stop working, rather than replacing components after a certain period of time.
It is crucial to know the condition of production machines in all areas of industry and to recognize possible sources of error at early stages to be able to plan scheduled maintenance in good time. Additionally, when important machine components are used to the maximum, tremendous cost savings can be realized.