Clamp on Tester CA-D30N

Order no.: CA-D30N

£ 352.00
£ 422.40
price ex. (VAT / delivery)
Delivery time: 1-2 working days

CA-D30N D Series Clamp on Tester
for oscilloscopes / for AC currents from 100 mA to 3000 A / 30 Hz - 50 kHz bandwidth / enclosure - Ø 64 mm / no power supply needed

The CA-D30N D Series Clamp on Tester for oscilloscopes, from Chauvin Arnoux, with its excellent characteristics is very suitable for the measurement of high currents. The high quality, low phase shift, and the wide frequency range of the D Series Clamp on Tester ensures accurate measurements, even with power measurements. The Clamp on Tester has a high-quality iron core with evenly distributed windings, allowing for accurate AC current measurement even at currents up to 3000 A. Due to the rectangular shape, the D Series is particularly suitable for busbars and cables with a large cross section. In total there are 10 different models of the D Series current transformers for oscilloscopes. They differ mainly in measuring range, CT ratio, and output. When measuring with the D Series the range that can be selected is between the maximum values 1500 A and 3000 A. The conversion ratio must be configured on either alternating current or voltage. And finally, the different models of the D Series differ in their output. There is a variant socket, cable with safety plug, and cable with BNC connector. Thus the D Series is suitable for both oscilloscopes and multimeters.

- 10 different models
- 64 mm / 2.5 in closing diameter
- ideal for busbars
- up to 50 kHz bandwidth
- measurement range 100 mA to 3000 A
- connection with bushes, banana plugs or BNC

Technical Specifications
Output: alternating current
Model / Product no. Measuring range CT ratio Connection
CA-D30N 1 A to 3000 A 3 A / 1 mA 4 mm / 0.2 in socket
General Specifications
Power supply unnecessary
Clamp opening 90 mm / 3.5 in
Operating voltage 600 V AC
Electrical safety Insulated, 600 V CAT III
Environmental conditions -10° C ... +55° C / +14° F ... +131° F
80 % RH to 50° C / 122° F
Protection IP 20
Dimensions 120 mm x 315 mm x 48 mm
4.7 in x 12.4 in x 1.9 in
Weight 1.2 kg / 2.6 lbs

Delivery Contents
1 x CA-D30N Clamp on Tester
1 x User manual in 5 languages