Clamp Meter CA-Mini09

Order no.: CA-Mini09

£ 66.00
£ 79.20
CA-Mini09
price ex. (VAT / delivery)
Delivery time: 1-2 working days
Clampconvertor up to 150 A AC, up to 10 kHz, current or voltage output, cable diameter up to 10 mm, 39 mm opening width, TRMS measurement
The clamp convertor of the mini-series impresses with itscompact dimensions. The clamp convertor can be used both for currents up to 150 A and for small currents of a few mA. The clamp convertor of the mini-series measures the AC reliably and accurately. Cables with a diameter up to 10 mmcan be added to the clamp convertor. The opening width of the clamp to this converter is 39 mm. The measured current is a conversion ratio of 1000; 1 or 100: 1 output as direct or alternating current or voltage of the clamp convertor. The clamp convertor is connected via the connector to any multimeter or to a data logger. In addition to the measurement of simple direct current at 50 Hz, the clamp convertor of the mini-series measures the TRMS current up to 10 kHz, if the connected meter also supports this measurement.

- Measurable up to 150 A
- 39 mm clamp opening
- 10 mm cable diameter - For small alternating currents
- Current or voltage output
- To 10 kHz TRMS
- Small dimensions
- For multimeters

Technical Data of the Clamp Converter Mini-Series
Model Mini 09


Measuring range 1 ... 150 A


Accuracy 4 %


Output 100mA/A AC


Bandwidth 48 ... 500 kHz


Environmental conditions

Operating: -10 ... 50 °C / 14 ... 122 °F, < 85 % r.H.

Storage: - 40 ... 80 °C / -40 ... 176 °F, < 85 % r.H.

Protection IP 40
Dimensions 130 x 37 x 25 mm / 5.1 x 1.4 x 0.9 in
Weight 180 g / 6.3 oz

Delivery Contents
1 x Clamp Convertor CA-Mini09