Cable Detector Easyloc

Order no.: Easyloc
£ 1,829.00
£ 2,194.80
Easyloc
price ex. (VAT / delivery)
Delivery time: 1-2 working days
Cable Locator for construction site / Cable location via radio waves or induction station / Measures the depth of layed pipelines
The Cable Locator Easyloc is designed for your building project to optimally prepare and to identify in advance the location of land cables and pipelines. Due to its robust design,the Easyloc cable locating device is especially suitable in the construction sector. The Easyloc locates cables and pipelines in the ground up to a maximum laying depth of 5m above the "natural radio waves". With theEasyloc station,cables and pipes to a depth of 7m can be located. The digital bar graph display with trailing pointer makes it easy foruntrained staff to find alaid underground cable with centimeter-accuracy. By means of the transmitter clamp, which is connected to the transmitter, exposed pipes are directly coupled, so it is even more quickly to locate the right line. With a simple keystroke, the laying depth is determined by the ground line previously found. This feature is especially helpful duringexcavation workto avoid cable damage and thus the associated repair time and repair costs. Thus, the cable locating device Easyloc is ideal for road and civil engineering companies, gardeners and landscapers,or municipalities own road maintenance. 

  • Locates buried cables and pipes
  • Depth measurements at a keystroke
  • Transmission frequency of 32.768 kHz
  • Large display with automatically dimmed backlight
  • Digital bar graph display with trailing pointer for rapid detection of pipelines
  • Acoustic signal for detecting the correct line
  • Capability of connecting a headset
  • Passive locating via natural radio waves,
    active locating via inductive transmitter
  • Direct delivery of a line via transmitter clamp, house connection or galvanic connection via alligator clips

Technical Data Receiver

Frequency ranges

Range 1: Radio

Range 2: Energy grid

Range 3: Sender

15 kHz ... 23 kHz

50 Hz / 60 Hz

32,768 kHz

Sensitivity

Range 1: Radio

Range 2: Energy grid

Range 3: Sender

> 20 µA

> 7 mA

> 5 µA

Depth determination

Locating range

Resolution

Accuracy (with undisturbed signal)

Range 1: Radio

Range 2: Energy grid

Range 3: Sender

Bylines

0.3 m ... 5 m 

0.1 m 

± 20 %

± 20 %

± 5 % (to 2 m)

± 20 %(2 m ... 5m)

Byprobes

0.3 m ... 7 m

0.1m

± 10 % (to 2 m)

± 20 % (2 m ... 7m)

Power supply10 x 1.5V AA Batteries
Uptime40 hours at intermittent operation

Temperature range (to DIN EN 60068-1)

- Operating

- Storage

-20 °C ... 55 °C 

-30 °C ... 70 °C

Weight2.5 kg
Dimensions (W x H x D)99 x 660 x 252 mm

Protection (to EN 60529)

Dust and water protection

IP67 from the lower edge of the receiver to the bottom of the battery compartment

IP56 for all parts above the battery compartment


Technical Data Transmitter

Transmission power

32,768 kHz

0.1 W / 0.5 W
Frequency32,768 kHz
Power supply6 x 1.5 V D-cell
Uptime40 hours at intermittent operation

Temperature range (to DIN EN 60068-1)

- Operating

- Storage

-20 °C ... 55 °C 

-30 °C ... 70 °C

Weight1.7 kg
Dimensions (W x H x D)260 x 255 x 140 mm

Protection (to EN 60529)

Dust and water protection

IP 56
Measurement category (to IEC / EN 61010-1)

CAT II / CAT III 440V

CAT IV 300V

General limits and standards for transmitters and receivers

Sinusoidal vibration (DIN EN 60068-2-6)

Peak acceleration

Frequency

20 m/s²

10 Hz ... 150 Hz

Freefall (DIN 600-2-32)

max. height (packaged)

80 cm (to max. 10 kg)
Relative humiditymax. 93 % to 30 °C
Air pressuremax. 4 kPa
Protection class (DIN EN 61140)III

Delivery Contents
1 x Easyloc Rx Receiver, 1 x Easyloc Tx Transmitter, 2 x Measuring line (2 m), 2 x Alligator clip, 1 x Earthing rod, 10 x 1.5 V AA Batteries, 6 x 1.5V Mono Batteries, 1 x Nylon bag, 1 x Instruction manual