Ordering hotline

Telephone order
 Ordering hotline

Monday - Friday
8.00am - 4.00pm

023 8098 7032

Hotline

Technical advice

 Technical Hotline

Monday - Friday
8.00am - 4.00pm

023 8098 7035

  1. You are here:
  2. Home
  3. Air Humidity Meter MSR165
  • Mini Shock Data Logger MSR165 with external Sensors
  • Mini Shock Data Logger MSR165 application
  • Mini Shock Data Logger MSR165 Software

Air Humidity Meter MSR165

Order no.: MSR165-

Delivery time: 2 weeks

MSR165: Data Logger for shock and vibration

THE bestseller for transportation monitoring, fault diagnoses and load tests! The robust MSR165 data logger is capable of making 1600 acceleration (shock, vibrations) measurements per second in all three axes. Shock monitoring is possible up to ±15 g or up to ±200 g, 32 measurement values are recorded even before the event takes place.

Over one billion measurement values

The installed memory is capable of storing over 2 million measured values which is sufficient for more than 10 000 shocks. A microSD card (≥4GB) can be used to increase the capacity of the data logger to over 1 billion measurement values. All saved measurements can be quickly transferred to a PC or laptop via the USB interface.

Ideal for long-term measurements

This waterproof data logger, in its anodised aluminium case, has extremely low power requirements due to its high-performance 3-axis accelerometer (13-bit resolution). Thanks to its rechargeable 900 mAh lithium-polymer battery the unit can record shock measurements over a period of up to six months. For an increased recording period of up to five years, the MSR165 can be equipped with replaceable long-life batteries. Alternatively, use the MSR Power Pack, an autonomous charging station that can be used to recharge the internal battery of the data logger during operation. The MSR Power Pack can be ordered separately and allows you to record data for up to 6 times longer.

The basic specification of the MSR165 includes a high resolution 3-axis acceleration sensor with a working range of either ±15 g or ±200 g. In addition to the acceleration, you can also record temperature, humidity, air pressure, light and four analogue input signals.

Configure your own custom MSR165 variant here and send us your order or request a no-obligation quotation with just a few clicks:
  1. Select the housing and the corresponding power supply.
  2. Select the sensors.
  3. Do you require an additional 4 analogue inputs for connecting third-party sensors?
  4. Would you like to expand the memory capacity with an SD memory card?

1. Select the housing and the corresponding power supply.

Type and power supply
 Technical data Item no.
Lithium polymer battery
(900 mAh), rechargeable via USB connection.
MSR165 data logger, anodised aluminium case, PC, encapsulated, IP67 waterproof, with an 900 mAh lithium polymer battery
Size & weight:
39 x 23 x 72 mm, approx. 69 g
Data logger housing:   Anodised aluminium case, PC, encapsulated,
IP67 waterproof.
Colour: Blue, anthracite
Medium: Air, various liquids
Key: Set bookmark or start and stop recording.
 
Integrated sensor: 3-axis digital accelerometer (13 Bit resolution),
±15 g or ±200 g
 
Memory capacity: Over 2 000 000 measured values, expandable to over 1bn measured values with optional microSD card.
 
Interface: USB
PC software: Setup, Reader, Viewer and Online software (Windows XP/Vista/7/8/10).
 
Operating conditions:   Temperature -20...+65 °C
Storage conditions:
  • Temperature +5...+45 °C (ideal storage condition for the battery)
  • 10...95 % relative humidity, non-condensing
 
Standards: The MSR165 complies with EU-Directives RoHS / WEEE.

165B8

Error
Replaceable Li-SOCl2 batteries
(3.6 V, 2 x 7700 mAh),
in a splashproof cast aluminium case.
MSR165 data logger, IP67 waterproof, with two replaceable Li-SOCl2 batteries (3.6 V, 2 x 7700 mAh) in a splashproof aluminium cast housing
Size & weight:
122 x 92 x 70 mm, approx. 530 g
165B52

Error

2. Select the sensors.

If your require a 200 g 3-axis acceleration sensor instead of the 15 g sensor and if you require further sensors, please select the desired sensors here.

Measured parameter /
Measuring/storage rate		 Working range /
Accuracy		 Internal
sensor		 External sensor (according to cable length)
0.20 m 1.00 m 1.60 m
Temperature

1/s to every 12 h		 external: -55...+125 °C
internal: -20...+65 °C
±0.5 °C (-10...+65 °C)
±2 °C (-55...+125 °C)		 Item no. T2
Error
 Item no. FT2/020
Error
 Item no. FT2/100
Error
 Item no. FT2/160
Error
Relative humidity
with integrated temperature

1/s to every 12 h		 0...100 % rel. humidity
external: -20...+85 °C
internal: -20...+65 °C
±2 % rel. humidity
(10...85 %, 0...+40 °C)
±4 % rel. humidity
(85...95 %, 0...+40 °C)
 Item no. H
Error
 Item no. FH/020
Error
 Item no. FH/100
Error
 Item no. FH/160
Error
Air pressure absolute,
with integrated temperature

1/s to every 12 h		 0...2000 mbar absolute
external: -20...+85 °C
internal: -20...+65 °C
±2.5 mbar
(750...1100 mbar abs.,
+25 °C)		 Item no. P
Error
 Item no. FP/020
Error
 Item no. FP/100
Error
 Item no. FP/160
Error
0...14 bar absolute
-20...+65 °C
±50 mbar
(1...10 bar absolute, +25 °C)		 Item no. P2
Error
 Item no. FP2/020
Error
 Item no. FP2/100
Error
 Item no. FP2/160
Error
3-axis-acceleration

1600/s to every 12 h
(±15 %)		 ±15 g
-20...+65 °C
±0.15 g (+25 °C)		 Item no. A
Error
 Item no. FA/020
Error
 Item no. FA/100
Error
 Item no. FA/160
Error
±200 g
-20...+65 °C
±2 g (0...15 g, +25 °C)
±5 g (15...100 g, +25 °C)
±10 g (100...200 g, +25 °C)		 Item no. A3
Error
 Item no. FA3/020
Error
 Item no. FA3/100
Error
 Item no. FA3/160
Error
Light

1/s to every 12 h		 0...65 000 lx
max. sensitivity at 500 nm		 Item no. L2
Error
 Item no. FL2/020
Error
 Item no. FL2/100
Error
 Item no. FL2/160
Error

3. Do you require an additional 4 analogue inputs for connecting third-party sensors?

Should you wish to connect additional external third-party sensors to your MSR165 datalogger then please select the required input configuration.

Analogue inputs Inputs Input configuration Item no.
Screw terminal for 4 analogue inputs
Including alarm output and input for starting
and stopping data recording.

Measurement/storage rate: 1/s (or 1000/s
if the acceleration measurement rate is less
than 1/s) up to every 12h. Max. 2 external
sensors possible, light sensor not available. 		4 analogue inputs
(resolution: 12 Bit) 		0...3.0 V - standard E3333
Error
4 analogue inputs
(resolution: 12 Bit) 		Select the number of inputs for the
respective input configuration:

(1)   0...20 mA
(2)   4...20 mA
(3)   0...3.0 V
(4)   0.5...4.5 V / 0...5.0 V
(5)   0...10.0 V / 1.0...6.0 V
(6)   0...12.0 V
(7)   0...24.0 V 		Exxxx
Error

4. Would you like to expand the memory capacity with an SD memory card?

Please order the expansion slot for plugging-in a standard microSD card here. Item no.
Expansion slot for microSD card (includes one formatted and ready for use ≥4GB microSD card).
Please note that this expansion slot with plugged-in microSD-card only meets the protection category IP60. 		N10006
Error

£ 687.65
£ 825.18
MSR165-
price ex. (VAT / delivery)
–
–